fix: fix auto gen config

Signed-off-by: Xinwei Xiong(cubxxw) <3293172751nss@gmail.com>

.docker-compose_cfg/config.yaml

@@ -1,79 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#---------------Infrastructure configuration---------------------#
-etcd:
-  etcdSchema: openim  #默认即可
-  etcdAddr: [ 127.0.0.1:2379 ] #单机部署时，默认即可
-  userName:
-  password:
-  secret: openIM123
-
-mysql:
-  dbMysqlDatabaseName: admin_chat # 数据库名字 默认即可
-
-# 默认管理员账号
-admin:
-  defaultAccount:
-    account: [ "admin1", "admin2" ]
-    defaultPassword: [ "password1", "password2" ]
-    openIMUserID: [ "openIM123456", "openIMAdmin" ]
-    faceURL: [ "", "" ]
-    nickname: [ "admin1", "admin2" ]
-    level: [ 1, 100 ]
-
-
-adminapi:
-  openImAdminApiPort: [ 10009 ] #管理后台api服务端口，默认即可，需要开放此端口或做nginx转发
-  listenIP: 0.0.0.0
-
-chatapi:
-  openImChatApiPort: [ 10008 ] #登录注册，默认即可，需要开放此端口或做nginx转发
-  listenIP: 0.0.0.0
-
-rpcport: # rpc服务端口 默认即可
-  openImAdminPort: [ 30200 ]
-  openImChatPort: [ 30300 ]
-
-
-rpcregistername: #rpc注册服务名，默认即可
-  openImChatName: Chat
-  openImAdminCMSName: Admin
-
-chat:
-  codeTTL: 300 #短信验证码有效时间(秒)
-  superVerificationCode: 666666 # 超级验证码
-  alismsverify: #阿里云短信配置，在阿里云申请成功后修改以下四项
-    accessKeyId:
-    accessKeySecret:
-    signName:
-    verificationCodeTemplateCode:
-
-
-oss:
-  tempDir: enterprise-temp # 临时密钥上传的目录
-  dataDir: enterprise-data # 最终存放目录
-  aliyun:
-    endpoint: https://oss-cn-chengdu.aliyuncs.com
-    accessKeyID: ""
-    accessKeySecret: ""
-    bucket: ""
-  tencent:
-    BucketURL: ""
-    serviceURL: https://cos.COS_REGION.myqcloud.com
-    secretID: ""
-    secretKey: ""
-    sessionToken: ""
-    bucket: ""
-  use: "minio"

.docker-compose_cfg/datasource-compose.yaml

@@ -1,27 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#more datasource-compose.yaml 
-apiVersion: 1
-
-datasources:
-- name: Prometheus
-  type: prometheus
-  access: proxy
-  orgId: 1
-  url: http://127.0.0.1:9091
-  basicAuth: false
-  isDefault: true
-  version: 1
-  editable: true

.docker-compose_cfg/prometheus-compose.yml

@@ -1,85 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#more prometheus-compose.yml 
-global:
-  scrape_interval:     15s 
-  evaluation_interval: 15s 
-  external_labels:
-    monitor: 'openIM-monitor'
-
-scrape_configs:
-    - job_name: 'prometheus'
-      static_configs:
-      - targets: ['localhost:9091']
-
-    - job_name: 'openIM-server'
-      metrics_path: /metrics
-      static_configs:
-      - targets: ['localhost:10002']
-        labels:
-          group: 'api'
-
-      - targets: ['localhost:20110']
-        labels:
-          group: 'user'
-
-      - targets: ['localhost:20120']
-        labels:
-          group: 'friend'
-
-      - targets: ['localhost:20130']
-        labels:
-          group: 'message'
-
-      - targets: ['localhost:20140']
-        labels:
-          group: 'msg-gateway'    
-
-      - targets: ['localhost:20150']
-        labels:
-          group: 'group'
-
-      - targets: ['localhost:20160']
-        labels:
-          group: 'auth'
-
-      - targets: ['localhost:20170']
-        labels:
-          group: 'push'
-
-      - targets: ['localhost:20120']
-        labels:
-          group: 'friend'
-
-      
-      - targets: ['localhost:20230']
-        labels:
-          group: 'conversation' 
-
-      
-      - targets: ['localhost:21400', 'localhost:21401', 'localhost:21402', 'localhost:21403']
-        labels:
-          group: 'msg-transfer'
-       
- 
-
-
-      
-
-    - job_name: 'node'  
-      scrape_interval: 8s
-      static_configs:
-      - targets: ['localhost:9100']
-     

.env

@@ -1,278 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# ======================================
-# ========= Basic Configuration ========
-# ======================================
-
-# The user for authentication or system operations.
-# Default: USER=root
-USER=root
-
-# Password associated with the specified user for authentication.
-# Default: PASSWORD=openIM123
-PASSWORD=openIM123
-
-# Endpoint for the MinIO object storage service.
-# Default: MINIO_ENDPOINT=http://172.28.0.1:10005
-MINIO_ENDPOINT=http://172.28.0.1:10005
-
-# Base URL for the application programming interface (API).
-# Default: API_URL=http://172.28.0.1:10002
-API_URL=http://127.0.0.1:10002
-
-# Directory path for storing data files or related information.
-# Default: DATA_DIR=./
-DATA_DIR=./
-
-# ======================================
-# ========= Network Configuration ======
-# ======================================
-
-# Subnet for the Docker network.
-# Default: DOCKER_BRIDGE_SUBNET=172.28.0.0/16
-DOCKER_BRIDGE_SUBNET=172.28.0.0/16
-
-# Gateway for the Docker network.
-# Default: DOCKER_BRIDGE_GATEWAY=172.28.0.1
-DOCKER_BRIDGE_GATEWAY=172.28.0.1
-
-# Address or hostname for the MySQL network.
-# Default: MYSQL_NETWORK_ADDRESS=172.28.0.2
-MYSQL_NETWORK_ADDRESS=172.28.0.2
-
-# Address or hostname for the MongoDB network.
-# Default: MONGO_NETWORK_ADDRESS=172.28.0.3
-MONGO_NETWORK_ADDRESS=172.28.0.3
-
-# Address or hostname for the Redis network.
-# Default: REDIS_NETWORK_ADDRESS=172.28.0.4
-REDIS_NETWORK_ADDRESS=172.28.0.4
-
-# Address or hostname for the Kafka network.
-# Default: KAFKA_NETWORK_ADDRESS=172.28.0.5
-KAFKA_NETWORK_ADDRESS=172.28.0.5
-
-# Address or hostname for the ZooKeeper network.
-# Default: ZOOKEEPER_NETWORK_ADDRESS=172.28.0.6
-ZOOKEEPER_NETWORK_ADDRESS=172.28.0.6
-
-# Address or hostname for the MinIO network.
-# Default: MINIO_NETWORK_ADDRESS=172.28.0.7
-MINIO_NETWORK_ADDRESS=172.28.0.7
-
-# Address or hostname for the OpenIM web network.
-# Default: OPENIM_WEB_NETWORK_ADDRESS=172.28.0.8
-OPENIM_WEB_NETWORK_ADDRESS=172.28.0.8
-
-# Address or hostname for the OpenIM server network.
-# Default: OPENIM_SERVER_NETWORK_ADDRESS=172.28.0.9
-OPENIM_SERVER_NETWORK_ADDRESS=172.28.0.9
-
-# Address or hostname for the OpenIM chat network.
-# Default: OPENIM_CHAT_NETWORK_ADDRESS=172.28.0.10
-OPENIM_CHAT_NETWORK_ADDRESS=172.28.0.10
-
-# Address or hostname for the Prometheus network.
-# Default: PROMETHEUS_NETWORK_ADDRESS=172.28.0.11
-PROMETHEUS_NETWORK_ADDRESS=172.28.0.11
-
-# Address or hostname for the Grafana network.
-# Default: GRAFANA_NETWORK_ADDRESS=172.28.0.12
-GRAFANA_NETWORK_ADDRESS=172.28.0.12
-
-
-# ===============================================
-# = Component Extension Configuration =
-# ===============================================
-
-# ============ Component Extension Configuration ==========
-# ----- ZooKeeper Configuration -----
-# Address or hostname for the ZooKeeper service.
-# Default: ZOOKEEPER_ADDRESS=172.28.0.1
-ZOOKEEPER_ADDRESS=172.28.0.6
-
-# Port for ZooKeeper service.
-# Default: ZOOKEEPER_PORT=12181
-ZOOKEEPER_PORT=12181
-
-# ----- MySQL Configuration -----
-
-# Address or hostname for the MySQL service.
-# Default: MYSQL_ADDRESS=172.28.0.1
-MYSQL_ADDRESS=172.28.0.2
-
-# Port on which MySQL database service is running.
-# Default: MYSQL_PORT=13306
-MYSQL_PORT=13306
-
-# Password to authenticate with the MySQL database service.
-# Default: MYSQL_PASSWORD=openIM123
-MYSQL_PASSWORD=openIM123
-
-# ----- MongoDB Configuration -----
-# Address or hostname for the MongoDB service.
-# Default: MONGO_ADDRESS=172.28.0.1
-MONGO_ADDRESS=172.28.0.3
-
-# Port on which MongoDB service is running.
-# Default: MONGO_PORT=37017
-MONGO_PORT=37017
-
-# Username to authenticate with the MongoDB service.
-# Default: MONGO_USERNAME=root
-MONGO_USERNAME=root
-
-# Password to authenticate with the MongoDB service.
-# Default: MONGO_PASSWORD=openIM123
-MONGO_PASSWORD=openIM123
-
-# Name of the database in MongoDB to be used.
-# Default: MONGO_DATABASE=openIM_v3
-MONGO_DATABASE=openIM_v3
-
-# ----- Redis Configuration -----
-# Address or hostname for the Redis service.
-# Default: REDIS_ADDRESS=172.28.0.1
-REDIS_ADDRESS=172.28.0.4
-
-# Port on which Redis in-memory data structure store is running.
-# Default: REDIS_PORT=16379
-REDIS_PORT=16379
-
-# Password to authenticate with the Redis service.
-# Default: REDIS_PASSWORD=openIM123
-REDIS_PASSWORD=openIM123
-
-# ----- Kafka Configuration -----
-# Address or hostname for the Kafka service.
-# Default: KAFKA_ADDRESS=172.28.0.1
-KAFKA_ADDRESS=172.28.0.5
-
-# Port on which Kafka distributed streaming platform is running.
-# Default: KAFKA_PORT=19092
-KAFKA_PORT=19094
-
-# Topic in Kafka for storing the latest messages in Redis.
-# Default: KAFKA_LATESTMSG_REDIS_TOPIC=latestMsgToRedis
-KAFKA_LATESTMSG_REDIS_TOPIC=latestMsgToRedis
-
-# Topic in Kafka for pushing messages (e.g. notifications or updates).
-# Default: KAFKA_MSG_PUSH_TOPIC=msgToPush
-KAFKA_MSG_PUSH_TOPIC=msgToPush
-
-# Topic in Kafka for storing offline messages in MongoDB.
-# Default: KAFKA_OFFLINEMSG_MONGO_TOPIC=offlineMsgToMongoMysql
-KAFKA_OFFLINEMSG_MONGO_TOPIC=offlineMsgToMongoMysql
-
-# ----- MinIO Configuration ----
-# Address or hostname for the MinIO object storage service.
-# Default: MINIO_ADDRESS=172.28.0.1
-MINIO_ADDRESS=172.28.0.7
-
-# Port on which MinIO object storage service is running.
-# Default: MINIO_PORT=10005
-MINIO_PORT=10005
-
-# Access key to authenticate with the MinIO service.
-# Default: MINIO_ACCESS_KEY=root
-MINIO_ACCESS_KEY=root
-
-# Secret key corresponding to the access key for MinIO authentication.
-# Default: MINIO_SECRET_KEY=openIM123
-MINIO_SECRET_KEY=openIM123
-
-# ----- Prometheus Configuration -----
-# Address or hostname for the Prometheus service.
-# Default: PROMETHEUS_ADDRESS=172.28.0.1
-PROMETHEUS_ADDRESS=172.28.0.11
-
-# Port on which Prometheus service is running.
-# Default: PROMETHEUS_PORT=19090
-PROMETHEUS_PORT=19090
-
-# ----- Grafana Configuration -----
-# Address or hostname for the Grafana service.
-# Default: GRAFANA_ADDRESS=172.28.0.1
-GRAFANA_ADDRESS=172.28.0.12
-
-# Port on which Grafana service is running.
-# Default: GRAFANA_PORT=3000
-GRAFANA_PORT=3000
-
-# ======================================
-# ============ OpenIM Web ===============
-# ======================================
-
-# Path to the OpenIM web distribution.
-# Default: OPENIM_WEB_DIST_PATH=/app/dist
-OPENIM_WEB_DIST_PATH=/app/dist
-
-# Port on which OpenIM web service is running.
-# Default: OPENIM_WEB_PORT=11001
-OPENIM_WEB_PORT=11001
-
-# Address or hostname for the OpenIM web service.
-# Default: OPENIM_WEB_ADDRESS=172.28.0.1
-OPENIM_WEB_ADDRESS=172.28.0.8
-
-# ======================================
-# ========= OpenIM Server ==============
-# ======================================
-
-# Address or hostname for the OpenIM server.
-# Default: OPENIM_SERVER_ADDRESS=172.28.0.1
-OPENIM_SERVER_ADDRESS=172.28.0.9
-
-# Port for the OpenIM WebSockets.
-# Default: OPENIM_WS_PORT=10001
-OPENIM_WS_PORT=10001
-
-# Port for the OpenIM API.
-# Default: API_OPENIM_PORT=10002
-API_OPENIM_PORT=10002
-
-
-# ======================================
-# ========== OpenIM Chat ===============
-# ======================================
-
-# Branch name for OpenIM chat.
-# Default: CHAT_BRANCH=main
-CHAT_BRANCH=main
-
-# Address or hostname for the OpenIM chat service.
-# Default: OPENIM_CHAT_ADDRESS=172.28.0.1
-OPENIM_CHAT_ADDRESS=172.28.0.10
-
-# Port for the OpenIM chat API.
-# Default: OPENIM_CHAT_API_PORT=10008
-OPENIM_CHAT_API_PORT=10008
-
-# Directory path for storing data files or related information for OpenIM chat.
-# Default: OPENIM_CHAT_DATA_DIR=./openim-chat/main
-OPENIM_CHAT_DATA_DIR=./openim-chat/main
-
-
-# ======================================
-# ========== OpenIM Admin ==============
-# ======================================
-
-# Branch name for OpenIM server.
-# Default: SERVER_BRANCH=main
-SERVER_BRANCH=main
-
-# Port for the OpenIM admin API.
-# Default: OPENIM_ADMIN_API_PORT=10009
-OPENIM_ADMIN_API_PORT=10009

.github/.codecov.yml

@@ -20,4 +20,20 @@ coverage:
         paths:
           - pkg/* # only include coverage in "pkg/" folder
         informational: true # Always pass check
-    patch: off # disable the commit only checks
+      tools: # declare a new status context "tools"
+        paths:
+          - tools/* # only include coverage in "tools/" folder
+        informational: true # Always pass check
+      test: # declare a new status context "test"
+        paths:
+          - test/* # only include coverage in "test/" folder
+        informational: true # Always pass check
+      # internal: # declare a new status context "internal"
+      #   paths:
+      #     - internal/* # only include coverage in "internal/" folder
+      #   informational: true # Always pass check
+      # cmd: # declare a new status context "cmd"
+      #   paths:
+      #     - cmd/* # only include coverage in "cmd/" folder
+      #   informational: true # Always pass check
+    patch: off # disable the commit only checks

.github/workflows/auto-gh-pr.yml

@@ -24,38 +24,49 @@ on:
     types: [created]
 
 jobs:
-  create-pr:
+  sync-issue-to-pr:
     runs-on: ubuntu-latest
-    if: github.event.pull_request.base.ref == 'main'
-    # && github.event.pull_request.merged == true
     steps:
-        - name: Check out code
-          uses: actions/checkout@v4
-          with:
-            fetch-depth: 0
+      - name: Checkout code
+        uses: actions/checkout@v2
+      
+      - name: Sync Issue to PR
+        if: github.event_name == 'pull_request' && github.event.pull_request.base.ref == 'main'
+        run: |
+          PR_BODY="${{ github.event.pull_request.body }}"
 
-        - name: Create PR to release branch
-          run: |
-            ISSUEID=$(gh pr view ${{ github.event.pull_request.number }} --repo $OWNER/$REPO | grep -oP 'Fixes #\K\d+')
-            echo "===========> $ISSUEID"
-            ISSUE=$(gh issue view $ISSUEID --repo $OWNER/$REPO --json labels,assignees,milestone,title)
-            echo "===========> $ISSUE"
+          ISSUE_NUMBER=$(echo "$PR_BODY" | grep -oP 'Fixes #\K\d+')
+          if [[ -z "$ISSUE_NUMBER" ]]; then
+            echo "No Issue number found."
+            exit 1
+          fi
 
-            LABELS=$(echo $ISSUE | jq -r '.labels[] | select(.name) | .name' | jq -R -r -s -c 'split("\n")[:-1] | join(",")')
-            ASSIGNEES=$(echo $ISSUE | jq -r '.assignees[] | select(.login) | .login' | jq -R -s -c 'split("\n")[:-1] | join(",")')
-            MILESTONE=$(echo $ISSUE | jq -r '.milestone | select(.title) | .title')
-            TITLE=$(echo $ISSUE | jq -r '.title')
+          echo "Issue number found: $ISSUE_NUMBER"
 
-            gh pr edit ${{ github.event.pull_request.number }} --repo $OWNER/$REPO --add-label "$LABELS" --add-assignee "$ASSIGNEES" --milestone "$MILESTONE"
+          # Using GitHub CLI to get issue details
+          gh issue view "$ISSUE_NUMBER" --repo "${{ github.repository }}" --json labels,assignees,milestone,title > issue_data.json
 
-            # git checkout -b bot/merge-to-release-$ISSUEID
-            # git push origin bot/merge-to-release-$ISSUEID
-            # gh pr create --base release --head bot/merge-to-release-$ISSUEID --title "Merge main to release" --body ""
-            # gh pr create --base main --head feat/auto-release-pr-624  --title "The bug is fixed" --body "$x" --repo openimsdk/open-im-server --reviewer "cubxxw"
-          continue-on-error: true
-          env:
-              GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
-              GH_TOKEN: ${{ github.token }}
-              ISSUE: ${{ github.event.issue.html_url }}
-              OWNER: ${{ github.repository_owner }}
-              REPO: ${{ github.event.repository.name }}
+          # Check if jq is installed
+          if ! command -v jq &> /dev/null; then
+            echo "Installing jq..."
+            sudo apt-get install -y jq
+          fi
+
+          # Parse data with jq
+          LABELS=$(jq -r '.labels | map(.name) | join(",")' issue_data.json)
+          ASSIGNEES=$(jq -r '.assignees | map(.login) | join(",")' issue_data.json)
+          MILESTONE=$(jq -r '.milestone.title' issue_data.json)
+
+          # Check if any of the fields are empty and set them to None
+          LABELS=${LABELS:-None}
+          ASSIGNEES=${ASSIGNEES:-None}
+          MILESTONE=${MILESTONE:-None}
+
+          # Edit the PR with issue details, handling empty fields
+          gh pr edit "${{ github.event.pull_request.number }}" --repo "${{ github.repository }}" \
+            ${LABELS:+--add-label "$LABELS"} \
+            ${ASSIGNEES:+--add-assignee "$ASSIGNEES"} \
+            ${MILESTONE:+--milestone "$MILESTONE"}
+        continue-on-error: true
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/auto-invite.yml

@@ -39,7 +39,7 @@ jobs:
             In addition to Slack, we also offer the following ways to get in touch:
             
             + <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q" target="_blank"><img src="https://img.shields.io/badge/Slack-OpenIM%2B-blueviolet?logo=slack&amp;logoColor=white"></a> We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) team channel.
-            + <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a> Get in touch with us on [Gmail](https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
+            + <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=info@openim.io" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a> Get in touch with us on [Gmail](https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
             + <a href="https://doc.rentsoft.cn/" target="_blank"><img src="https://img.shields.io/badge/%E5%8D%9A%E5%AE%A2-%40OpenIMSDKCore-blue?style=social&logo=Octopus%20Deploy"></a> Read our [blog](https://doc.rentsoft.cn/). Our blog is a great place to stay up-to-date with Open-IM-Server projects and trends. On the blog, we share our latest developments, tech trends, and other interesting information.
             + <a href="https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg" target="_blank"><img src="https://img.shields.io/badge/%E5%BE%AE%E4%BF%A1-OpenIMSDKCore-brightgreen?logo=wechat&style=flat-square"></a> Add [Wechat](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg) and indicate that you are a user or developer of Open-IM-Server. We will process your request as soon as possible.
 

.github/workflows/auto-tag.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: Create Tag
+name: OpenIM Create Tag
 
 on:
   issue_comment:

.github/workflows/bot-auto-cherry-pick.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: 'Github Rebot for Cherry Pick when PR is merged'
+name: Github Rebot for Cherry Pick when PR is merged
 on:
   pull_request_target:
     types:

.github/workflows/build-docker-image.yml

@@ -52,6 +52,7 @@ jobs:
             type=ref,event=branch
             type=ref,event=pr
             type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
             type=semver,pattern={{major}}.{{minor}}
             type=semver,pattern={{major}}
             type=sha
@@ -87,6 +88,16 @@ jobs:
         uses: docker/metadata-action@v5.0.0
         with:
           images: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server
+          # generate Docker tags based on the following events/attributes
+          tags: |
+            type=schedule
+            type=ref,event=branch
+            type=ref,event=pr
+            type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=semver,pattern={{major}}
+            type=sha
 
       - name: Log in to AliYun Docker Hub
         uses: docker/login-action@v3
@@ -126,6 +137,7 @@ jobs:
             type=ref,event=branch
             type=ref,event=pr
             type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
             type=semver,pattern={{major}}.{{minor}}
             type=semver,pattern={{major}}
             type=sha

.github/workflows/build-openim-web-image.yml

@@ -15,11 +15,11 @@
 name: Build OpenIM Web Docker image
 
 on:
-  schedule:
-  - cron: '30 3 * * *'
+#   schedule:
+#   - cron: '30 3 * * *'
   push:
     branches:
-      - main
+    #   - main
       - release-*
     tags:
       - v*

.github/workflows/check-coverage.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: Check-Coverage
+name: OpenIM Check Coverage
 
 on:
   workflow_dispatch:

.github/workflows/cla.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: "OpenIM CLA Assistant"
+name: OpenIM CLA Assistant
 on:
   issue_comment:
     types: [created]
@@ -33,7 +33,7 @@ env:
   OPEN_IM_SERVER_CLA_DOCUMENT: https://github.com/openim-sigs/cla/blob/main/README.md
   OPEN_IM_SERVER_SIGNATURES_PATH: signatures/${{ github.event.repository.name }}/cla.json
 
-  OPEN_IM_SERVER_ALLOWLIST: kubbot,bot* 
+  OPEN_IM_SERVER_ALLOWLIST: kubbot,bot*,bot-*,bot/*,bot-/*,bot,*[bot]
 
 jobs:
   CLAAssistant:

.github/workflows/create-branch-on-tag.yml

@@ -19,6 +19,10 @@ on:
     tags:
       - 'v*.*.0'
 
+permissions:
+  contents: write
+  actions: write
+
 jobs:
   create-branch:
     runs-on: ubuntu-latest
@@ -36,41 +40,38 @@ jobs:
     - name: Install git-chglog
       run: make install.git-chglog
 
-    - name: Create Branch
+    - name: Create Branch and Push
+      env:
+        TAG_NAME: ${{ github.ref_name }}
       run: |
-        TAG_NAME=${GITHUB_REF/refs\/tags\//}
         IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
         if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
           BRANCH_NAME="release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}"
           echo "Creating branch $BRANCH_NAME"
           git checkout -b "$BRANCH_NAME"
           git push origin "$BRANCH_NAME"
+        else
+          echo "Not a release tag. Skipping branch creation."
         fi
+      continue-on-error: true
 
-    - name: Push Changes
-      uses: stefanzweifel/git-auto-commit-action@v5
-      with:
-        commit_message: "Auto Commit CHANGELOG"
-        branch: release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}
-      env:
-        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
-
-    - name: Create and Push CHANGELOG
+    - name: Create and Commit CHANGELOG
+      if: endsWith(github.ref_name, '.0')
       run: |
-        git checkout main
-        TAG_NAME=${GITHUB_REF/refs\/tags\//}
+        git fetch --all
+        TAG_NAME=${GITHUB_REF#refs/tags/}
         IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
-        if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
-          cd CHANGELOG
-          git-chglog --tag-filter-pattern "v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.*"  -o "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
-          git add "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
-          git commit -m "Update CHANGELOG for $TAG_NAME"
-        fi
+        git checkout main
+        cd CHANGELOG
+        git-chglog --tag-filter-pattern "v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.*" -o "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+        git add "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+        git commit -m "Update CHANGELOG for $TAG_NAME" || echo "No changes to commit."
+      continue-on-error: true
 
-    - name: Push Changes
-      uses: stefanzweifel/git-auto-commit-action@v5
+    - name: Push CHANGELOG to Main
+      if: steps.create-and-commit-changelog.outputs.changes == 'true'
+      uses: ad-m/github-push-action@v0.6.0
       with:
-        commit_message: "Auto Commit CHANGELOG"
+        github_token: ${{ secrets.BOT_GITHUB_TOKEN }}
         branch: main
-      env:
-        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+    continue-on-error: true

.github/workflows/deploy.yml

@@ -1,55 +0,0 @@
-# Copyright © 2023 OpenIM open source community. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: OpenIM Deploy for dev
-
-on:
-  push:
-    branches:
-      - 'devops' # Only for the dev branch
-      - 'main'
-    paths:
-      - '.github/workflows/*'
-      # - '__test__/**' # dev No immediate testing is required
-      - 'src/**'
-      - 'Dockerfile'
-      - 'docker-compose.yml'
-      - 'bin/*'
-
-jobs:
-  deploy-dev:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: executing remote ssh commands using password
-        uses: appleboy/ssh-action@v1.0.0
-        env:
-            OWNER: ${{ github.repository_owner }}
-            REPO: ${{ github.event.repository.name }}
-        with:
-          host: "${{ secrets.SG_M1_HOST }}, ${{ secrets.SG_N1_HOST }}, ${{ secrets.SG_N2_HOST}}"
-          username: ${{ secrets.SG_USERNAME }}
-          password: ${{ secrets.SG_PASSWORD }}
-          port: ${{ secrets.SG_PORT }}
-          envs: OWNER,REPO
-          script_stop: true
-          script: |
-            mkdir -p /test/openim
-            cd /test/openim
-            pwd;ls -al
-            echo "OWNER: $OWNER"
-            echo "REPO: $REPO"
-            git clone -b develop https://github.com/${OWNER}/${REPO}.git; cd ${REPO}
-            docker compose up -d
-        continue-on-error: true

.github/workflows/depsreview.yaml

@@ -2,7 +2,7 @@
 # Licensed under the MIT License (the "License");
 # you may not use this file except in compliance with the License.
 
-name: Dependency Review
+name: OpenIM Dependency Review
 on: [pull_request]
 
 permissions:

.github/workflows/docker-buildx.yml

@@ -54,6 +54,19 @@ jobs:
           username: ${{ github.repository_owner }}
           password: ${{ secrets.GITHUB_TOKEN }}
 
+      - name: Log in to Docker Hub
+        uses: docker/login-action@v3
+        with:
+          username: ${{ secrets.DOCKER_USERNAME }}
+          password: ${{ secrets.DOCKER_PASSWORD }}
+
+      - name: Log in to AliYun Docker Hub
+        uses: docker/login-action@v3
+        with:
+          registry: registry.cn-hangzhou.aliyuncs.com
+          username: ${{ secrets.ALIREGISTRY_USERNAME }}
+          password: ${{ secrets.ALIREGISTRY_TOKEN }}
+
 ################################################
 # build/
 # └── docker
@@ -89,7 +102,10 @@ jobs:
         id: meta1
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-api
+          images: |
+            ghcr.io/openimsdk/openim-api
+            openim/openim-api
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-api
 
       - name: Build and push Docker image for openim-api
         uses: docker/build-push-action@v5
@@ -107,7 +123,10 @@ jobs:
         id: meta2
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-cmdutils
+          images: |
+            ghcr.io/openimsdk/openim-cmdutils
+            openim/openim-cmdutils
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-cmdutils
 
       - name: Build and push Docker image for openim-cmdutils
         uses: docker/build-push-action@v5
@@ -125,7 +144,10 @@ jobs:
         id: meta3
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-crontask
+          images: |
+            ghcr.io/openimsdk/openim-crontask
+            openim/openim-crontask
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-crontask
 
       - name: Build and push Docker image for openim-crontask
         uses: docker/build-push-action@v5
@@ -143,7 +165,10 @@ jobs:
         id: meta4
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-msggateway
+          images: |
+            ghcr.io/openimsdk/openim-msggateway
+            openim/openim-msggateway
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-msggateway
 
       - name: Build and push Docker image for openim-msggateway
         uses: docker/build-push-action@v5
@@ -161,7 +186,10 @@ jobs:
         id: meta5
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-msgtransfer
+          images: |
+            ghcr.io/openimsdk/openim-msgtransfer
+            openim/openim-msgtransfer
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-msgtransfer
 
       - name: Build and push Docker image for openim-msgtransfer
         uses: docker/build-push-action@v5
@@ -179,7 +207,10 @@ jobs:
         id: meta6
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-push
+          images: |
+            ghcr.io/openimsdk/openim-push
+            openim/openim-push
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-push
 
       - name: Build and push Docker image for openim-push
         uses: docker/build-push-action@v5
@@ -197,7 +228,10 @@ jobs:
         id: meta7
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-rpc-auth
+          images: |
+            ghcr.io/openimsdk/openim-rpc-auth
+            openim/openim-rpc-auth
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-auth
 
       - name: Build and push Docker image for openim-rpc-auth
         uses: docker/build-push-action@v5
@@ -215,7 +249,10 @@ jobs:
         id: meta8
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-rpc-conversation
+          images: |
+            ghcr.io/openimsdk/openim-rpc-conversation
+            openim/openim-rpc-conversation
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-conversation
 
       - name: Build and push Docker image for openim-rpc-conversation
         uses: docker/build-push-action@v5
@@ -233,7 +270,10 @@ jobs:
         id: meta9
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-rpc-friend
+          images: |
+            ghcr.io/openimsdk/openim-rpc-friend
+            openim/openim-rpc-friend
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-friend
 
       - name: Build and push Docker image for openim-rpc-friend
         uses: docker/build-push-action@v5
@@ -251,7 +291,10 @@ jobs:
         id: meta10
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-rpc-group
+          images: |
+            ghcr.io/openimsdk/openim-rpc-group
+            openim/openim-rpc-group
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-group
 
       - name: Build and push Docker image for openim-rpc-group
         uses: docker/build-push-action@v5
@@ -269,7 +312,10 @@ jobs:
         id: meta11
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-rpc-msg
+          images: |
+            ghcr.io/openimsdk/openim-rpc-msg
+            openim/openim-rpc-msg
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-msg
 
       - name: Build and push Docker image for openim-rpc-msg
         uses: docker/build-push-action@v5
@@ -287,7 +333,10 @@ jobs:
         id: meta12
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-rpc-third
+          images: |
+            ghcr.io/openimsdk/openim-rpc-third
+            openim/openim-rpc-third
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-third
 
       - name: Build and push Docker image for openim-rpc-third
         uses: docker/build-push-action@v5
@@ -305,7 +354,10 @@ jobs:
         id: meta13
         uses: docker/metadata-action@v5.0.0
         with:
-          images: ghcr.io/openimsdk/openim-rpc-user
+          images: |
+            ghcr.io/openimsdk/openim-rpc-user
+            openim/openim-rpc-user
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-user
 
       - name: Build and push Docker image for openim-rpc-user
         uses: docker/build-push-action@v5
@@ -318,4 +370,3 @@ jobs:
           labels: ${{ steps.meta13.outputs.labels }}
           cache-from: type=local,src=/tmp/.buildx-cache
           cache-to: type=local,dest=/tmp/.buildx-cache
-

.github/workflows/e2e-test.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: e2e
+name: OpenIM Linux System E2E Test
 
 on:
   workflow_dispatch:
@@ -41,4 +41,71 @@ jobs:
 
       - name: Create e2e test
         run: |
-          echo "...test e2e"
+          echo "...test e2e"
+
+  execute-linux-systemd-scripts:
+    name: Execute OpenIM script on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    environment:
+      name: openim
+    strategy:
+      matrix:
+        go_version: ["1.20"]
+        os: ["ubuntu-latest"]
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v4
+
+    - name: Set up Go ${{ matrix.go_version }}
+      uses: actions/setup-go@v4
+      with:
+        go-version: ${{ matrix.go_version }}
+      id: go
+
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
+    - name: Docker Operations
+      run: |
+        curl -o docker-compose.yml https://raw.githubusercontent.com/OpenIMSDK/openim-docker/main/example/basic-openim-server-dependency.yml
+        sudo docker compose up -d
+        sudo sleep 60
+
+    - name: Module Operations
+      run: |
+        sudo make tidy
+        sudo make tools.verify.go-gitlint
+
+    - name: Build, Start
+      run: |
+        sudo ./scripts/install/install.sh -i
+
+    - name: Exec OpenIM System Status Chack
+      run: |
+        sudo ./scripts/install/install.sh -s
+
+    - name: Exec OpenIM API test
+      run: |
+        sudo make test-api
+    
+    - name: Exec OpenIM E2E test
+      run: |
+        sudo make test-e2e
+
+    - name: Exec OpenIM System uninstall
+      run: |
+        sudo ./scripts/install/install.sh -u
+
+    - name: gobenchdata publish
+      uses: bobheadxi/gobenchdata@v1
+      with:
+        PRUNE_COUNT: 30
+        GO_TEST_FLAGS: -cpu 1,2
+        PUBLISH: true
+        PUBLISH_BRANCH: gh-pages
+      env:
+        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+      continue-on-error: true

.github/workflows/greetings.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: first-interaction
+name: OpenIM First Interaction
 
 on:
   issues:

.github/workflows/issue-robot.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: 'issue translator'
+name: OpenIM Issue Aotu Translator
 on:
   issue_comment:
     types: [created]

.github/workflows/link-pr.yml

@@ -41,7 +41,7 @@ jobs:
             # ./*.md all markdown files in the root directory
           args: --verbose  -E -i --no-progress --exclude-path './CHANGELOG' './**/*.md'
         env:
-          GITHUB_TOKEN: ${{secrets.GH_PAT}}
+          GITHUB_TOKEN: ${{secrets.BOT_GITHUB_TOKEN}}
 
       - name: Create Issue From File
         if: env.lychee_exit_code != 0

.github/workflows/opencommit.yml

@@ -12,12 +12,13 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: 'OpenIM Commit Action'
+name: OpenIM OpenCommit Action
 
 on:
   push:
-    branches:
-      - main
+    # this list of branches is often enough,
+    # but you may still ignore other public branches
+    branches-ignore: [main master dev development release]
 
 jobs:
   opencommit:
@@ -27,20 +28,20 @@ jobs:
     permissions: write-all
     steps:
       - name: Setup Node.js Environment
-        uses: actions/setup-node@v3
+        uses: actions/setup-node@v2
         with:
           node-version: '16'
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v3
         with:
           fetch-depth: 0
       - uses: di-sukharev/opencommit@github-action-v1.0.4
         with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
 
         env:
           # set openAI api key in repo actions secrets,
           # for openAI keys go to: https://platform.openai.com/account/api-keys
-          # for repo secret go to: https://github.com/kuebcub/settings/secrets/actions
+          # for repo secret go to: <your_repo_url>/settings/secrets/actions
           OCO_OPENAI_API_KEY: ${{ secrets.OPENAI_API_KEY }}
 
           # customization
@@ -48,5 +49,6 @@ jobs:
           OCO_OPENAI_BASE_PATH: ''
           OCO_DESCRIPTION: false
           OCO_EMOJI: false
-          OCO_MODEL: gpt-3.5-turbo
-          OCO_LANGUAGE: en
+          OCO_MODEL: gpt-3.5-turbo-16k
+          OCO_LANGUAGE: en
+          OCO_PROMPT_MODULE: conventional-commit

.github/workflows/openimci.yml

@@ -64,7 +64,8 @@ jobs:
     - name: Install Task
       uses: arduino/setup-task@v1
       with:
-        version: 2.x
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
 
     - name: Module Operations
       run: |
@@ -122,7 +123,8 @@ jobs:
     - name: Install Task
       uses: arduino/setup-task@v1
       with:
-        version: 2.x
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
     - name: Run OpenIM make install start
       run: |
         sudo make install
@@ -145,10 +147,13 @@ jobs:
       with:
         go-version: ${{ matrix.go_version }}
       id: go
+
     - name: Install Task
       uses: arduino/setup-task@v1
       with:
-        version: 2.x
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
     - name: Docker Operations
       run: |
         curl -o docker-compose.yml https://raw.githubusercontent.com/OpenIMSDK/openim-docker/main/example/basic-openim-server-dependency.yml
@@ -160,13 +165,34 @@ jobs:
         sudo make tidy
         sudo make tools.verify.go-gitlint
 
-    - name: Build, Start and Check Services
+    - name: Build, Start, Check Services and Print Logs
       run: |
-        sudo make init
-        sudo make build
-        sudo make start
-        sudo make check
+        sudo make init && \
+        sudo make build && \
+        sudo make start && \
+        sudo make check || \
+        (echo "An error occurred, printing logs:" && sudo cat ./_output/logs/* 2>/dev/null)
 
-    - name: Print OpenIM Logs
-      run: sudo cat ./_output/logs/* 2>/dev/null
-      continue-on-error: true
+  openim-test-build-image:
+    name: Build OpenIM Docker Image
+    runs-on: ubuntu-latest
+    environment:
+      name: openim
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v4
+    - name: Set up Go ${{ matrix.go_version }}
+      uses: actions/setup-go@v4
+      with:
+        go-version: ${{ matrix.go_version }}
+      id: go
+
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
+    - name: Test Docker Build
+      run: |
+        sudo make image

.github/workflows/pull-request.yml

@@ -41,8 +41,10 @@ jobs:
         run: |
           git config user.name 'openimbot'
           git config user.email 'openimsdk@qq.com'
-          git checkout -b cicd/patch-${{ github.event.number }}
-      - uses: actions/setup-node@v3
+          BRANCH_NAME="auto-pr-$(date +'%Y%m%d%H%M%S')"
+          git checkout -b $BRANCH_NAME
+
+      - uses: actions/setup-node@v4
       - name: Setup Go
         uses: actions/setup-go@v4
       - name: Run go modules tidy
@@ -50,6 +52,7 @@ jobs:
           sudo make tidy
           sudo make tools.verify.go-gitlint
           echo "Run go modules tidy successfully" 
+        continue-on-error: true
 
       - name: Run go format
         run: |
@@ -75,13 +78,8 @@ jobs:
           echo "Run unit test and get test coverage successfully" 
         continue-on-error: true
 
-    #   - name: Initialize CodeQL
-    #     uses: github/codeql-action/init@v2
-    #     with:
-    #       languages: go
-
-    #   - name: Perform CodeQL Analysis
-        # uses: github/codeql-action/analyze@v2
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v2
 
       - name: OpenIM verify copyright
         run: |
@@ -89,31 +87,26 @@ jobs:
           sudo make add-copyright
           echo "OpenIM verify successfully" 
         continue-on-error: true
-      
-    #   - name: Commit code
-    #     run: |
-    #         git add .
-    #         git commit -m "cicd: bump League Patch to cicd/patch-${{ github.event.number }}"
-    
+
       - name: Create Pull Request
         uses: peter-evans/create-pull-request@v5
         with:
           token: ${{ secrets.BOT_GITHUB_TOKEN }}
-          commit-message: "cicd: bump League Patch to cicd/patch-${{ github.event.number }}"
-          title: Bump League Patch to cicd/patch-${{ github.event.number }}
+          commit-message: "cicd: bump League Patch"
           author: kubbot <kubbot@3293172751ysy@gmail.com>
           signoff: false
           draft: false
-          branch: "cicd/patch-${{ github.event.number }}"
+          branch: ''
           assignees: cubxxw
           reviewers: cubxxw
           delete-branch: true
+          title: "Bump League Patch auto PR: $(date +'%Y%m%d')"
           body: |
             Review criteria:
 
             - [ ] Disenchanter can connect and issue actions
             
-            This is an automated PR. @ ${{ github.actor }}
+            This is an automated PR. @ $(date +'%Y%m%d')
             <sub>[workflow](https://github.com/openimsdk/open-im-server/blob/main/.github/workflows/pull-request.yml).</sub>
           base: main
           labels: |

.github/workflows/scripts-verify.yml

@@ -1,76 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: OpenIM executes the script validation code
-
-on: 
-  push:
-    branches:
-        - main
-    paths-ignore:
-        - "docs/**"
-        - "README.md"
-        - "README_zh-CN.md"
-        - "CONTRIBUTING.md"
-  pull_request:
-    branches:
-        - main
-    paths-ignore:
-        - "README.md"
-        - "README_zh-CN.md"
-        - "CONTRIBUTING.md"
-        - "docs/**"
-
-env:
-  GO_VERSION: "1.19"
-  GOLANGCI_VERSION: "v1.50.1"
-
-jobs:
-  openim:
-    name: Test with go ${{ matrix.go_version }} on ${{ matrix.os }}
-    runs-on: ${{ matrix.os }}
-    permissions:
-        contents: write
-    environment:
-      name: openim
-
-    strategy:
-      matrix:
-        go_version: ["1.21"]
-        os: [ubuntu-latest]
-
-    steps:
-    - name: Setup
-      uses: actions/checkout@v4
-      
-    - name: In ${{ matrix.os }} Execute the script validation code
-      uses: actions/setup-go@v4
-      with:
-        go-version: ${{ matrix.go_version }}
-      id: go
-
-    - name: scripts validation
-      run: |
-        sudo make verify
-      continue-on-error: true
-
-    - name: verify format
-      run: |
-        sudo make format
-      continue-on-error: true
-
-    - name: verify license
-      run: |
-        sudo make verify-copyright
-      continue-on-error: true

.gitignore

@@ -29,6 +29,7 @@ tmp/
 bin/
 output/
 _output/
+deployments/charts/generated-configs/
 
 ### OpenIM Config ###
 config/config.yaml
@@ -37,18 +38,7 @@ config/config.yaml
 ./.env
 
 ### OpenIM deploy ###
-deploy/openim_demo
-deploy/openim-api
-deploy/openim-rpc-msg_gateway
-deploy/openim-msgtransfer
-deploy/openim-push
-deploy/openim_timer_task
-deploy/openim-rpc-user
-deploy/openim-rpc-friend
-deploy/openim-rpc-group
-deploy/openim-rpc-msg
-deploy/openim-rpc-auth
-deploy/Open-IM-SDK-Core
+deployments/openim-server/charts
 
 # files used by the developer
 .idea.md

.golangci.yml

@@ -510,7 +510,7 @@ linters-settings:
 
   nestif:
     # minimal complexity of if statements to report, 5 by default
-    min-complexity: 6
+    min-complexity: 4
 
   nilnil:
     # By default, nilnil checks all returned types below.
@@ -715,83 +715,18 @@ linters:
   # enable-all: true
   disable-all: true
   enable:
-    - typecheck
-    - asciicheck
-    - bodyclose
-    - cyclop
-    # - depguard
-    - dogsled
-    - dupl
-    - durationcheck
-    - errcheck
-    - errorlint
-    - exhaustive
-    - exportloopref
-    # - forbidigo
-    - funlen
-    # - gci
-    # - gochecknoinits
-    - gocognit
-    - goconst
-    - gocyclo
-    - godot
-    - godox
-    - gofmt
-    - gofumpt
-    - goheader
-    - goimports
-    - gomoddirectives
-    - gomodguard
-    - goprintffuncname
-    - gosec
-    - gosimple
-    - govet
-    - importas
-    - ineffassign
-    - lll
-    - makezero
-    - misspell
-    - nakedret
-    - nestif
-    - nilerr
-    - nlreturn
-    - noctx
-    - nolintlint
-    - paralleltest
-    - prealloc
-    - predeclared
-    - promlinter
-    - revive
-    - rowserrcheck
-    - sqlclosecheck
-    - staticcheck
-    - stylecheck
-    - thelper
-    - tparallel
-    - unconvert
-    - unparam
-    - unused
-    - wastedassign
-    - whitespace
-    - bidichk
-    - wastedassign
-    - execinquery
-    - nosprintfhostport
-    - grouper
-    - decorder
-    - errchkjson
-    - maintidx
-      #- containedctx
-      #- tagliatelle
-      #- nonamedreturns
-      #- nilnil
-      #- tenv
-      #- varnamelen
-      #- contextcheck
-      #- errname
-      #- ForceTypeAssert
-      #- nilassign
-  fast: false
+    - typecheck     # 基本的类型检查
+    - gofmt         # 格式检查
+    - govet         # Go 语言的标准检查工具
+    - gosimple      # 简化代码的建议
+    - misspell      # 拼写错误
+    - staticcheck   # 静态检查
+    - unused        # 未使用的代码检查
+    - goimports     # 检查导入是否正确排序和格式化
+    - godot         # 注释句点检查
+    - bodyclose     # 确保 HTTP response body 被关闭
+    - errcheck      # 检查是否遗漏了错误返回值
+  fast: true
 
 issues:
   # List of regexps of issue texts to exclude, empty list by default.

CHANGELOG/CHANGELOG.md

@@ -20,7 +20,7 @@ All notable changes to this project will be documented in this file.
 
 ## OpenIM versioning policy
 
-+ [OpenIM Version](../docs/conversions/version.md)
++ [OpenIM Version](../docs/contrib/version.md)
 
 ## command
 

CODE_OF_CONDUCT.md

@@ -60,7 +60,7 @@ representative at an online or offline event.
 
 Instances of abusive, harassing, or otherwise unacceptable behavior may be
 reported to the community leaders responsible for enforcement at
-3293172751nss@gmail.com.
+`security@openim.io`.
 All complaints will be reviewed and investigated promptly and fairly.
 
 All community leaders are obligated to respect the privacy and security of the

CONTRIBUTING.md

@@ -42,6 +42,12 @@ If you are familiar with [Makefile](./Makefile) , you can easily see the clever
 
 The [Makefile](./Makefile) is for every developer, even if you don't know how to use the Makefile tool, don't worry, we provide two great commands to get you up to speed with the Makefile architecture, `make help` and `make help-all`, it can reduce problems of the developing environment.
 
+In accordance with the naming conventions adopted by OpenIM and drawing reference from the Google Naming Conventions as per the guidelines available at https://google.github.io/styleguide/go/, the following expectations for naming practices within the project are set forth: 
+
++ https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/code-conventions.md
++ https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/go-code.md
+
+
 ## Code of ConductCode of Conduct
 
 #### Code and doc contribution
@@ -186,7 +192,7 @@ We divide the problem into security and general problems:
 
 Security issues are always treated seriously. As our usual principle, we discourage anyone to spread security issues. If you find a security issue of Open-IM-Server, please do not discuss it in public and even do not open a public issue.
 
-Instead we encourage you to send us a private email to winxu81@gmail.com to report this.
+Instead we encourage you to send us a private email to info@openim.io to report this.
 
 #### Reporting general issues
 
@@ -270,7 +276,7 @@ You can find some very formal PR in [RFC](https://github.com/openimsdk/open-im-s
 **🈴 Reviewing PRs:**
 
 + Be respectful and constructive 
-+ Assign yourself to the PR 
++ Assign yourself to the PR (comment `/assign`)
 + Check if all checks are passing
 + Suggest changes instead of simply commenting on found issues
 + If you are unsure about something, ask the author
@@ -369,7 +375,7 @@ Our most recommended way to get in touch is through [Slack](https://join.slack.c
 In addition to Slack, we also offer the following ways to get in touch:
 
 + <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q" target="_blank"><img src="https://img.shields.io/badge/slack-%40OpenIMSDKCore-informational?logo=slack&style=flat-square"></a>:  We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) team channel.
-+ <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=4closetool3@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a>: Get in touch with us on [Gmail](winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
++ <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=4closetool3@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a>: Get in touch with us on [Gmail](info@openim.io). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
 + <a href="https://doc.rentsoft.cn/" target="_blank"><img src="https://img.shields.io/badge/%E5%8D%9A%E5%AE%A2-%40OpenIMSDKCore-blue?style=social&logo=Octopus%20Deploy"></a>: Read our [blog](https://doc.rentsoft.cn/). Our blog is a great place to stay up-to-date with Open-IM-Server projects and trends. On the blog, we share our latest developments, tech trends, and other interesting information.
 + <a href="https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg" target="_blank"><img src="https://img.shields.io/badge/%E5%BE%AE%E4%BF%A1-OpenIMSDKCore-brightgreen?logo=wechat&style=flat-square"></a>: Add [Wechat](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg) and indicate that you are a user or developer of Open-IM-Server. We will process your request as soon as possible.
 

Dockerfile

@@ -25,7 +25,8 @@ WORKDIR ${SERVER_WORKDIR}
 
 # Copy scripts and binary files to the production image
 COPY --from=builder ${OPENIM_SERVER_BINDIR} /openim/openim-server/_output/bin
-# COPY --from=builder ${OPENIM_SERVER_CMDDIR} /openim/openim-server/scripts
-# COPY --from=builder ${SERVER_WORKDIR}/config /openim/openim-server/config
+COPY --from=builder ${OPENIM_SERVER_CMDDIR} /openim/openim-server/scripts
+COPY --from=builder ${SERVER_WORKDIR}/config /openim/openim-server/config
+COPY --from=builder ${SERVER_WORKDIR}/deployments /openim/openim-server/deployments
 
 CMD ["/openim/openim-server/scripts/docker-start-all.sh"]

Makefile

@@ -6,7 +6,7 @@
 
 ## all: Run tidy, gen, add-copyright, format, lint, cover, build ✨
 .PHONY: all
-all: tidy gen add-copyright verify lint cover restart
+all: tidy gen add-copyright verify test-api lint cover restart
 
 # ==============================================================================
 # Build set
@@ -73,9 +73,9 @@ gen:
 demo:
 	@$(MAKE) go.demo
 
-## versionchecker: Check version of openim. ✨
-.PHONY: versionchecker
-versionchecker:
+## version: Check version of openim. ✨
+.PHONY: version
+version:
 	@$(MAKE) go.versionchecker
 
 ## build: Build binaries by default ✨
@@ -93,9 +93,9 @@ start:
 stop:
 	@$(MAKE) go.stop
 
-## restart: Restart openim ✨
+## restart: Restart openim (make init configuration file is initialized) ✨
 .PHONY: restart
-restart: clean stop build init start
+restart: clean stop build init start check
 
 ## multiarch: Build binaries for multiple platforms. See option PLATFORMS. ✨
 .PHONY: multiarch
@@ -166,6 +166,15 @@ test:
 cover:
 	@$(MAKE) go.test.cover
 
+## test-api: Run api test. ✨
+.PHONY: test-api
+test-api:
+	@$(MAKE) go.test.api
+
+## test-e2e: Run e2e test
+test-e2e:
+	@$(MAKE) go.test.e2e
+
 ## updates: Check for updates to go.mod dependencies. ✨
 .PHONY: updates
 	@$(MAKE) go.updates

README-zh_CN.md

@@ -1,5 +1,5 @@
 <p align="center">
-    <a href="https://www.openim.online">
+    <a href="https://openim.io">
         <img src="./assets/logo-gif/openim-logo.gif" width="60%" height="30%"/>
     </a>
 </p>
@@ -23,12 +23,16 @@
 <p align="center">
     <a href="./README.md"><b> English </b></a> •
     <a href="./README-zh_CN.md"><b> 简体中文 </b></a> •
-    <a href="https://www.openim.online/en"><b> Docs </b></a>
+    <a href="https://openim.io/en"><b> Docs </b></a>
 </p>
 
 
 </p>
 
+## 🟢 扫描微信进群交流
+<img src="./docs/images/Wechat.jpg" width="300">
+
+
 ## Ⓜ️ 关于 OpenIM
 
 OpenIM 不仅仅是一个开源的即时消息组件，它是你的应用程序生态系统的一个不可或缺的部分。查看下面的图表，了解 AppServer、AppClient、OpenIMServer 和 OpenIMSDK 是如何交互的。
@@ -86,22 +90,22 @@ OpenIM 我们的目标是建立一个顶级的开源社区。我们有一套标
 
 在开始之前，请确保你的更改是有需求的。最好的方法是创建一个[新的讨论](https://github.com/openimsdk/open-im-server/discussions/new/choose) 或 [Slack 通信](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q)，或者如果你发现一个问题，首先[报告它](https://github.com/openimsdk/open-im-server/issues/new/choose)。
 
-+ [代码标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/go_code.md)
++ [代码标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/go-code.md)
 
-+ [Docker 镜像标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/images.md)
++ [Docker 镜像标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/images.md)
 
-+ [目录标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/directory.md)
++ [目录标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/directory.md)
 
-+ [提交标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/commit.md)
++ [提交标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/commit.md)
 
-+ [版本控制标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md)
++ [版本控制标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md)
 
-+ [接口标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/interface.md)
++ [接口标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/interface.md)
 
 + [OpenIM配置和环境变量设置](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/environment.md)
 
 > **Note**
-> 针对中国的用户，阅读我们的 [Docker 镜像标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/images.md) 以便使用国内 aliyun 的镜像地址。OpenIM 也有针对中国的 gitee 同步仓库，你可以在 [gitee.com](https://gitee.com/openimsdk) 上找到它。
+> 针对中国的用户，阅读我们的 [Docker 镜像标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/images.md) 以便使用国内 aliyun 的镜像地址。OpenIM 也有针对中国的 gitee 同步仓库，你可以在 [gitee.com](https://gitee.com/openimsdk) 上找到它。
 
 ## :link: 链接
 

README.md

@@ -1,33 +1,30 @@
 <p align="center">
-    <a href="https://www.openim.online">
+    <a href="https://openim.io">
         <img src="./assets/logo-gif/openim-logo.gif" width="60%" height="30%"/>
     </a>
 </p>
 
-<h3 align="center" style="border-bottom: none">
-    ⭐️  Open source Instant Messaging Server ⭐️ <br>
-<h3>
+<div align="center">
 
+[![Stars](https://img.shields.io/github/stars/openimsdk/open-im-server?style=for-the-badge&logo=github&colorB=ff69b4)](https://github.com/openimsdk/open-im-server/stargazers)
+[![Forks](https://img.shields.io/github/forks/openimsdk/open-im-server?style=for-the-badge&logo=github&colorB=blue)](https://github.com/openimsdk/open-im-server/network/members)
+[![Codecov](https://img.shields.io/codecov/c/github/openimsdk/open-im-server?style=for-the-badge&logo=codecov&colorB=orange)](https://app.codecov.io/gh/openimsdk/open-im-server)
+[![Go Report Card](https://goreportcard.com/badge/github.com/openimsdk/open-im-server?style=for-the-badge)](https://goreportcard.com/report/github.com/openimsdk/open-im-server)
+[![Go Reference](https://img.shields.io/badge/Go%20Reference-blue.svg?style=for-the-badge&logo=go&logoColor=white)](https://pkg.go.dev/github.com/openimsdk/open-im-server/v3)
+[![License](https://img.shields.io/badge/license-Apache--2.0-green?style=for-the-badge)](https://github.com/openimsdk/open-im-server/blob/main/LICENSE)
+[![Slack](https://img.shields.io/badge/Slack-500%2B-blueviolet?style=for-the-badge&logo=slack&logoColor=white)](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q)
+[![Best Practices](https://img.shields.io/badge/Best%20Practices-purple?style=for-the-badge)](https://www.bestpractices.dev/projects/8045)
+[![Good First Issues](https://img.shields.io/github/issues/openimsdk/open-im-server/good%20first%20issue?style=for-the-badge&logo=github)](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22)
+[![Language](https://img.shields.io/badge/Language-Go-blue.svg?style=for-the-badge&logo=go&logoColor=white)](https://golang.org/)
 
-<p align=center>
-<a href="https://goreportcard.com/report/github.com/openimsdk/open-im-server"><img src="https://goreportcard.com/badge/github.com/openimsdk/open-im-server" alt="A+"></a>
-<a href="https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22"><img src="https://img.shields.io/github/issues/openimsdk/open-im-server/good%20first%20issue?logo=%22github%22" alt="good first"></a>
-<a href="https://github.com/openimsdk/open-im-server"><img src="https://img.shields.io/github/stars/openimsdk/open-im-server.svg?style=flat&logo=github&colorB=deeppink&label=stars"></a>
-<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q"><img src="https://img.shields.io/badge/Slack-300%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
-<a href="https://github.com/openimsdk/open-im-server/blob/main/LICENSE"><img src="https://img.shields.io/badge/license-Apache--2.0-green"></a>
-<a href="https://golang.org/"><img src="https://img.shields.io/badge/Language-Go-blue.svg"></a>
-<a href="https://pkg.go.dev/github.com/openimsdk/open-im-server/v3"><img src="https://pkg.go.dev/badge/github.com/openimsdk/open-im-server/v3.svg" alt="Go Reference"></a>
-</p>
+[**English**](./README.md) •
+[**简体中文**](./README-zh_CN.md) •
+[**Docs**](https://openim.io/en)
+
+</div>
 
 </p>
 
-<p align="center">
-    <a href="./README.md"><b> English </b></a> •
-    <a href="./README-zh_CN.md"><b> 简体中文 </b></a> •
-<a href="https://www.openim.online/en"><b> Docs </b></a>
-</p>
-
-</p>
 
 ## Ⓜ️ About OpenIM
 
@@ -61,7 +58,7 @@ It's crafted in Golang and supports cross-platform deployment, ensuring a cohere
 + **REST API**: OpenIMServer provides REST API for business systems, aiming to empower your operations with additional functionalities like group creation and message push via backend interfaces.
 + **Callbacks**: To expand its utility across varied business forms, OpenIMServer offers callback capabilities. That is, it sends a request to the business server before or after an event occurs, such as sending a message, enriching the interaction and data exchange flow in the communication processes.
 
-👉 **[Learn More](https://doc.rentsoft.cn/guides/introduction/product)**
+👉 **[Learn More](https://docs.openim.io/guides/introduction/product)**
 
 <!--
 
@@ -118,7 +115,7 @@ It is recommended to use Docker Compose for deployment, which can easily and qui
 
 > **Note**
 >
-> If you don't know OpenIM's versioning policy, 📚Read our release policy: https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md
+> If you don't know OpenIM's versioning policy, 📚Read our release policy: https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md
 
 
 </details> 
@@ -133,7 +130,7 @@ Ur need `Go 1.20` or higher version, and `make`.
 go version && make --version || echo "Error: One of the commands failed."
 ```
 
-Version Details: https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md
+Version Details: https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md
 
 You can get the version number from the command below or from [github releases](https://github.com/openimsdk/open-im-server/tags).
 
@@ -141,7 +138,7 @@ You can get the version number from the command below or from [github releases](
 $ curl --silent "https://api.github.com/repos/openimsdk/open-im-server/releases" | jq -r '.[].tag_name'
 ```
 
-We have our own version management policy, if you are interested in our version management, I recommend reading [📚 OpenIM Version](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md), We recommend using stable versions such as `v3.3.0` and `v3.2.0` whenever possible. `v3.1.1-alpha.3` as well as `v3.3.0-beta.0` and `v3.2.0-rc.0` are pre-release or beta versions and are not recommended.
+We have our own version management policy, if you are interested in our version management, I recommend reading [📚 OpenIM Version](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md), We recommend using stable versions such as `v3.3.0` and `v3.2.0` whenever possible. `v3.1.1-alpha.3` as well as `v3.3.0-beta.0` and `v3.2.0-rc.0` are pre-release or beta versions and are not recommended.
 
 Set `OPENIM_VERSION` environment variables for the latest `OPENIM_VERSION` number, or replace the `OPENIM_VERSION` for you to install the OpenIM-Server `OPENIM_VERSION`:
 
@@ -179,8 +176,9 @@ Read: Configuration center document：https://github.com/openimsdk/open-im-serve
 </details> 
 -->
 
-+ **[Source Code Deployment Guide](https://doc.rentsoft.cn/guides/gettingStarted/imSourceCodeDeployment)**
-+ **[Docker Deployment Guide](https://doc.rentsoft.cn/guides/gettingStarted/dockerCompose)**
++ **[Source Code Deployment Guide](https://docs.openim.io/guides/gettingStarted/imSourceCodeDeployment)**
++ **[Production deployment of Linux systems](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/install-openim-linux-system.md)**
++ **[Docker Deployment Guide](https://docs.openim.io/guides/gettingStarted/dockerCompose)**
 + **[Kubernetes Deployment Guide](https://github.com/openimsdk/open-im-server/tree/main/deployments)**
 
 <!-- 
@@ -198,22 +196,42 @@ Delve into the heart of Open-IM-Server's functionality with our architecture dia
 
 ## :hammer_and_wrench: To start developing OpenIM
 
+[![Open in Dev Container](https://img.shields.io/static/v1?label=Dev%20Container&message=Open&color=blue&logo=visualstudiocode)](https://vscode.dev/github/openimsdk/open-im-server)
+
 OpenIM Our goal is to build a top-level open source community. We have a set of standards, in the [Community repository](https://github.com/OpenIMSDK/community).
 
 If you'd like to contribute to this Open-IM-Server repository, please read our [contributor documentation](https://github.com/openimsdk/open-im-server/blob/main/CONTRIBUTING.md).
 
 Before you start, please make sure your changes are in demand. The best for that is to create a [new discussion](https://github.com/openimsdk/open-im-server/discussions/new/choose) OR [Slack Communication](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q), or if you find an issue, [report it](https://github.com/openimsdk/open-im-server/issues/new/choose) first.
 
-- [Code Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/go_code.md)
-- [Docker Images Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/images.md)
-- [Directory Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/directory.md)
-- [Commit Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/commit.md)
-- [Versioning Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md)
-- [Interface Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/api.md)
-- [Log Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/logging.md)
-- [Error Code Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/error_code.md)
-- [OpenIM configuration and environment variable Settings](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/environment.md)
-
+- [OpenIM API Reference](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/api.md)
+- [OpenIM Bash Logging](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/bash-log.md)
+- [OpenIM CI/CD Actions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/cicd-actions.md)
+- [OpenIM Code Conventions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/code-conventions.md)
+- [OpenIM Commit Guidelines](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/commit.md)
+- [OpenIM Development Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/development.md)
+- [OpenIM Directory Structure](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/directory.md)
+- [OpenIM Environment Setup](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/environment.md)
+- [OpenIM Error Code Reference](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/error-code.md)
+- [OpenIM Git Workflow](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/git-workflow.md)
+- [OpenIM Git Cherry Pick Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/gitcherry-pick.md)
+- [OpenIM GitHub Workflow](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/github-workflow.md)
+- [OpenIM Go Code Standards](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/go-code.md)
+- [OpenIM Image Guidelines](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/images.md)
+- [OpenIM Initial Configuration](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/init-config.md)
+- [OpenIM Docker Installation Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/install-docker.md)
+- [OpenIM OpenIM Linux System Installation](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/install-openim-linux-system.md)
+- [OpenIM Linux Development Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/linux-development.md)
+- [OpenIM Local Actions Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/local-actions.md)
+- [OpenIM Logging Conventions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/logging.md)
+- [OpenIM Offline Deployment](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/offline-deployment.md)
+- [OpenIM Protoc Tools](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/protoc-tools.md)
+- [OpenIM Testing Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/test.md)
+- [OpenIM Utility Go](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-go.md)
+- [OpenIM Makefile Utilities](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-makefile.md)
+- [OpenIM Script Utilities](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-scripts.md)
+- [OpenIM Versioning](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/version.md)
+- [Manage backend and monitor deployment](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/prometheus-grafana.md)
 
 ## :busts_in_silhouette: Community
 

build/goreleaser.yaml

@@ -255,131 +255,6 @@ builds:
       - "6"
       - "7"
 
-  - binary: infra
-    id: infra
-    main: ./tools/infra/infra.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-
-  - binary: ncpu
-    id: ncpu
-    main: ./tools/ncpu/ncpu.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-
-  - binary: openim-web
-    id: openim-web
-    main: ./tools/openim-web/openim-web.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-
-  - binary: component
-    id: component
-    main: ./tools/component/component.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-    
-  - binary: versionchecker
-    id: versionchecker
-    main: ./tools/versionchecker/versionchecker.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-
-  - binary: changelog
-    id: changelog
-    main: ./tools/changelog/changelog.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-
-  - binary: yamlfmt
-    id: yamlfmt
-    main: ./tools/yamlfmt/yamlfmt.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
 
 # TODO：Need a script, such as the init - release to help binary to find the right directory
 # ,which can be compiled binary

build/images/Dockerfile

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 FROM BASE_IMAGE
 
 WORKDIR ${SERVER_WORKDIR}

cmd/openim-api/main.go

@@ -18,10 +18,13 @@ import (
 	"context"
 	"fmt"
 	"net"
+	"net/http"
 	_ "net/http/pprof"
+	"os"
+	"os/signal"
 	"strconv"
-
-	"github.com/openimsdk/open-im-server/v3/pkg/common/discovery_register"
+	"syscall"
+	"time"
 
 	"github.com/OpenIMSDK/protocol/constant"
 	"github.com/OpenIMSDK/tools/discoveryregistry"
@@ -31,6 +34,9 @@ import (
 	"github.com/openimsdk/open-im-server/v3/pkg/common/cmd"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/db/cache"
+	kdisc "github.com/openimsdk/open-im-server/v3/pkg/common/discoveryregister"
+	ginProm "github.com/openimsdk/open-im-server/v3/pkg/common/ginprometheus"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/prommetrics"
 )
 
 func main() {
@@ -43,19 +49,18 @@ func main() {
 	}
 }
 
-func run(port int) error {
-	log.ZInfo(context.Background(), "Openim api port:", "port", port)
+func run(port int, proPort int) error {
+	log.ZInfo(context.Background(), "Openim api port:", "port", port, "proPort", proPort)
 
-	if port == 0 {
-		err := "port is empty"
+	if port == 0 || proPort == 0 {
+		err := "port or proPort is empty:" + strconv.Itoa(port) + "," + strconv.Itoa(proPort)
 		log.ZError(context.Background(), err, nil)
-
 		return fmt.Errorf(err)
 	}
+
 	rdb, err := cache.NewRedis()
 	if err != nil {
 		log.ZError(context.Background(), "Failed to initialize Redis", err)
-
 		return err
 	}
 	log.ZInfo(context.Background(), "api start init discov client")
@@ -63,26 +68,32 @@ func run(port int) error {
 	var client discoveryregistry.SvcDiscoveryRegistry
 
 	// Determine whether zk is passed according to whether it is a clustered deployment
-	client, err = discovery_register.NewDiscoveryRegister(config.Config.Envs.Discovery)
+	client, err = kdisc.NewDiscoveryRegister(config.Config.Envs.Discovery)
 	if err != nil {
 		log.ZError(context.Background(), "Failed to initialize discovery register", err)
-
 		return err
 	}
+
 	if err = client.CreateRpcRootNodes(config.Config.GetServiceNames()); err != nil {
 		log.ZError(context.Background(), "Failed to create RPC root nodes", err)
-
 		return err
 	}
+
 	log.ZInfo(context.Background(), "api register public config to discov")
 	if err = client.RegisterConf2Registry(constant.OpenIMCommonConfigKey, config.Config.EncodeConfig()); err != nil {
 		log.ZError(context.Background(), "Failed to register public config to discov", err)
-
 		return err
 	}
+
 	log.ZInfo(context.Background(), "api register public config to discov success")
 	router := api.NewGinRouter(client, rdb)
+	if config.Config.Prometheus.Enable {
+		p := ginProm.NewPrometheus("app", prommetrics.GetGinCusMetrics("Api"))
+		p.SetListenAddress(fmt.Sprintf(":%d", proPort))
+		p.Use(router)
+	}
 	log.ZInfo(context.Background(), "api init router success")
+
 	var address string
 	if config.Config.Api.ListenIP != "" {
 		address = net.JoinHostPort(config.Config.Api.ListenIP, strconv.Itoa(port))
@@ -91,10 +102,25 @@ func run(port int) error {
 	}
 	log.ZInfo(context.Background(), "start api server", "address", address, "OpenIM version", config.Version)
 
-	err = router.Run(address)
-	if err != nil {
-		log.ZError(context.Background(), "api run failed", err, "address", address)
+	server := http.Server{Addr: address, Handler: router}
+	go func() {
+		err = server.ListenAndServe()
+		if err != nil && err != http.ErrServerClosed {
+			log.ZError(context.Background(), "api run failed", err, "address", address)
+			os.Exit(1)
+		}
+	}()
 
+	sigs := make(chan os.Signal, 1)
+	signal.Notify(sigs, syscall.SIGINT, syscall.SIGTERM, syscall.SIGQUIT)
+	<-sigs
+
+	ctx, cancel := context.WithTimeout(context.Background(), 15*time.Second)
+	defer cancel()
+
+	// graceful shutdown operation.
+	if err := server.Shutdown(ctx); err != nil {
+		log.ZError(context.Background(), "failed to api-server shutdown", err)
 		return err
 	}
 

cmd/openim-msggateway/main.go

@@ -23,6 +23,7 @@ func main() {
 	msgGatewayCmd.AddWsPortFlag()
 	msgGatewayCmd.AddPortFlag()
 	msgGatewayCmd.AddPrometheusPortFlag()
+
 	if err := msgGatewayCmd.Exec(); err != nil {
 		panic(err.Error())
 	}

cmd/openim-msgtransfer/main.go

@@ -21,6 +21,7 @@ import (
 func main() {
 	msgTransferCmd := cmd.NewMsgTransferCmd()
 	msgTransferCmd.AddPrometheusPortFlag()
+	msgTransferCmd.AddTransferProgressFlag()
 	if err := msgTransferCmd.Exec(); err != nil {
 		panic(err.Error())
 	}

config/config.yaml

@@ -1,397 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the License);
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# -----------------------------------------------------------------
-# TODO: This config file is the template file
-# --| source: deployments/templates/openim.yaml
-# --| env: scripts/install/environment
-# --| target: config/config.yaml
-# -----------------------------------------------------------------
-
-###################### Zookeeper ######################
-# Zookeeper configuration
-# It's not recommended to modify the schema
-# 
-# Zookeeper address
-# Zookeeper username
-# Zookeeper password
-envs:
-  discovery: zookeeper
-
-zookeeper:
-  schema: openim
-  address: [ 172.28.0.1:12181 ]
-  username: ''
-  password: ''
-
-###################### Mysql ######################
-# MySQL configuration
-# Currently, only single machine setup is supported
-#
-# Maximum number of open connections
-# Maximum number of idle connections
-# Maximum lifetime in seconds a connection can be reused
-# Log level: 1=slient, 2=error, 3=warn, 4=info
-# Slow query threshold in milliseconds
-mysql:
-  address: [ 172.28.0.1:13306 ]
-  username: root
-  password: openIM123
-  database: openIM_v3
-  maxOpenConn: 1000
-  maxIdleConn: 100
-  maxLifeTime: 60
-  logLevel: 4
-  slowThreshold: 500
-
-###################### Mongo ######################
-# MongoDB configuration
-# If uri is not empty, it will be used directly
-#
-# MongoDB address for standalone setup, Mongos address for sharded cluster setup
-# Default MongoDB database name
-# Maximum connection pool size
-mongo:
-  uri: ''
-  address: [ 172.28.0.1:37017 ]
-  database: openIM_v3
-  username: root
-  password: openIM123
-  maxPoolSize: 100
-
-###################### Redis configuration information ######################
-# Redis configuration
-#
-# Username is required only for Redis version 6.0+
-redis:
-  address: [ 172.28.0.1:16379 ]
-  username: ''
-  password: openIM123
-
-###################### Kafka configuration information ######################
-# Kafka configuration
-#
-# Kafka username
-# Kafka password
-# It's not recommended to modify this topic name
-# Consumer group ID, it's not recommended to modify
-kafka:
-  username: ''
-  password: ''
-  addr: [ 172.28.0.1:19094 ]
-  latestMsgToRedis:
-    topic: "latestMsgToRedis"
-  offlineMsgToMongo:
-    topic: "offlineMsgToMongoMysql"
-  msgToPush:
-    topic: "msgToPush"
-  consumerGroupID:
-    msgToRedis: redis
-    msgToMongo: mongo
-    msgToMySql: mysql
-    msgToPush: push
-
-###################### RPC configuration information ######################
-# RPC configuration
-#
-# IP address to register with zookeeper when starting RPC, the IP and corresponding rpcPort should be accessible by api/gateway
-# Default listen IP is 0.0.0.0
-rpc:
-  registerIP: ''
-  listenIP: 0.0.0.0
-
-###################### API configuration information ######################
-# API configuration
-#
-# API service port
-# Default listen IP is 0.0.0.0
-api:
-  openImApiPort: [ 10002 ]
-  listenIP: 0.0.0.0
-
-###################### Object configuration information ######################
-# Object storage configuration
-#
-# Use minio for object storage
-# API URL should be accessible by the app
-# It's not recommended to modify the bucket name
-# Endpoint should be accessible by the app
-# Session token
-# Configuration for Tencent COS
-# Configuration for Aliyun OSS
-# apiURL is the address of the api, the access address of the app, use s3 must be configured
-# minio.endpoint can be configured as an intranet address,
-# minio.signEndpoint is minio public network address
-object:
-  enable: "minio"
-  apiURL: "http://127.0.0.1:10002"
-  minio:
-    bucket: "openim"
-    endpoint: "http://172.28.0.1:10005"
-    accessKeyID: "root"
-    secretAccessKey: "openIM123"
-    sessionToken: ''
-    signEndpoint: "http://127.0.0.1:10005"
-    publicRead: false
-  cos:
-    bucketURL: https://temp-1252357374.cos.ap-chengdu.myqcloud.com
-    secretID: ''
-    secretKey: ''
-    sessionToken: ''
-    publicRead: false
-  oss:
-    endpoint: "https://oss-cn-chengdu.aliyuncs.com"
-    bucket: "demo-9999999"
-    bucketURL: "https://demo-9999999.oss-cn-chengdu.aliyuncs.com"
-    accessKeyID: ''
-    accessKeySecret: ''
-    sessionToken: ''
-    publicRead: false
-
-###################### RPC Port Configuration ######################
-# RPC service ports
-# These ports are passed into the program by the script and are not recommended to modify
-# For launching multiple programs, just fill in multiple ports separated by commas
-# For example, [10110, 10111]
-rpcPort: 
-  openImUserPort: [ 10110 ]
-  openImFriendPort: [ 10120 ]
-  openImMessagePort: [ 10130 ]
-  openImMessageGatewayPort: [ 10140 ]
-  openImGroupPort: [ 10150 ]
-  openImAuthPort: [ 10160 ]
-  openImPushPort: [ 10170 ]
-  openImConversationPort: [ 10180 ]
-  openImThirdPort: [ 10190 ]
-
-###################### RPC Register Name Configuration ######################
-# RPC service names for registration, it's not recommended to modify these
-rpcRegisterName:
-  openImUserName: User
-  openImFriendName: Friend
-  openImMsgName: Msg
-  openImPushName: Push
-  openImMessageGatewayName: MessageGateway
-  openImGroupName: Group
-  openImAuthName: Auth
-  openImConversationName: Conversation
-  openImThirdName: Third
-
-###################### Log Configuration ######################
-# Log configuration
-#
-# Storage directory
-# Log rotation time
-# Maximum number of logs to retain
-# Log level, 6 means all levels
-# Whether to output to stdout
-# Whether to output in json format
-# Whether to include stack trace in logs
-log:
-  storageLocation: ../../logs/
-  rotationTime: 24
-  remainRotationCount: 2
-  remainLogLevel: 6
-  isStdout: false
-  isJson: false
-  withStack: false
-
-###################### Variables definition ######################
-# Long connection server configuration
-#
-# Websocket port for msg_gateway
-# Maximum number of websocket connections
-# Maximum length of websocket request package
-# Websocket connection handshake timeout
-longConnSvr:
-  openImWsPort: [ 10001 ]
-  openImMessageGatewayPort: [ 10140 ]
-  websocketMaxConnNum: 100000
-  websocketMaxMsgLen: 4096
-  websocketTimeout: 10
-
-# Push notification service configuration
-#
-# Use GeTui for push notifications
-# GeTui offline push configuration
-# FCM offline push configuration
-# Account file, place it in the config directory
-# JPush configuration, modify these after applying in JPush backend
-push:
-  enable: getui
-  geTui:
-    pushUrl: "https://restapi.getui.com/v2/$appId"
-    masterSecret: ''
-    appKey: ''
-    intent: ''
-    channelID: ''
-    channelName: ''
-  fcm:
-    serviceAccount: "x.json"
-  jpns:
-    appKey: ''
-    masterSecret: ''
-    pushUrl: ''
-    pushIntent: ''
-
-# App manager configuration
-#
-# Built-in app manager user IDs
-# Built-in app manager nicknames
-manager:
-  userID: [ "openIM123456", "openIM654321", "openIMAdmin" ]
-  nickname: [ "system1", "system2", "system3" ]
-
-# Multi-platform login policy
-# For each platform(Android, iOS, Windows, Mac, web), only one can be online at a time
-multiLoginPolicy: 1
-
-# Whether to store messages in MySQL, messages in MySQL are only used for management background
-chatPersistenceMysql: true
-
-# Message cache timeout in seconds, it's not recommended to modify
-msgCacheTimeout: 86400
-
-# Whether to enable read receipts for group chat
-groupMessageHasReadReceiptEnable: true
-
-# Whether to enable read receipts for single chat
-singleMessageHasReadReceiptEnable: true
-
-# MongoDB offline message retention period in days
-retainChatRecords: 365
-
-# Schedule to clear expired messages(older than retainChatRecords days) in MongoDB every Wednesday at 2am
-# This deletion is just for cleaning up disk usage according to previous configuration retainChatRecords, no notification will be sent
-chatRecordsClearTime: "0 2 * * 3"
-
-# Schedule to auto delete messages every day at 2am
-# This deletion is for messages that have been retained for more than msg_destruct_time (seconds) in the conversation field
-msgDestructTime: "0 2 * * *"
-
-# Secret key
-secret: openIM123
-
-# Token policy
-#
-# Token expiration period in days
-tokenPolicy:
-  expire: 90
-
-# Message verification policy
-#
-# Whether to verify friendship when sending messages
-messageVerify:
-  friendVerify: false
-
-# iOS push notification configuration
-#
-# iOS push notification sound
-# Whether to count badge
-# Whether it's production environment
-iosPush:
-  pushSound: "xxx"
-  badgeCount: true
-  production: false
-
-###################### Third-party service configuration ######################
-# Callback configuration
-#
-# Callback URL
-# Whether to enable this callback event
-# Timeout in seconds
-# Whether to continue execution if callback fails
-callback:
-  url:
-  beforeSendSingleMsg:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  afterSendSingleMsg:
-    enable: false
-    timeout: 5
-  beforeSendGroupMsg:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  afterSendGroupMsg:
-    enable: false
-    timeout: 5
-  msgModify:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  userOnline:
-    enable: false
-    timeout: 5
-  userOffline:
-    enable: false
-    timeout: 5
-  userKickOff:
-    enable: false
-    timeout: 5
-  offlinePush:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  onlinePush:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  superGroupOnlinePush:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  beforeAddFriend:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  beforeUpdateUserInfo:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  beforeCreateGroup:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  beforeMemberJoinGroup:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  beforeSetGroupMemberInfo:
-    enable: false
-    timeout: 5
-    failedContinue: true
-  setMessageReactionExtensions:
-    enable: false
-    timeout: 5
-    failedContinue: true
-
-###################### Prometheus ######################
-# Prometheus configuration for various services
-# The number of Prometheus ports per service needs to correspond to rpcPort
-# The number of ports needs to be consistent with msg_transfer_service_num in script/path_info.sh
-prometheus:
-  enable: false
-  userPrometheusPort: [ 20110 ]
-  friendPrometheusPort: [ 20120 ]
-  messagePrometheusPort: [ 20130 ]
-  messageGatewayPrometheusPort: [ 20140 ]
-  groupPrometheusPort: [ 20150 ]
-  authPrometheusPort: [ 20160 ]
-  pushPrometheusPort: [ 20170 ]
-  conversationPrometheusPort: [ 20230 ]
-  rtcPrometheusPort: [ 21300 ]
-  thirdPrometheusPort: [ 21301 ]
-  messageTransferPrometheusPort: [ 21400, 21401, 21402, 21403 ] # List of ports

config/email.tmpl

@@ -0,0 +1,16 @@
+{{ define "email.to.html" }}
+{{ range .Alerts }}
+<!-- Begin of OpenIM Alert -->
+<div style="border:1px solid #ccc; padding:10px; margin-bottom:10px;">
+    <h3>OpenIM Alert</h3>
+    <p><strong>Alert Program:</strong> Prometheus Alert</p>
+    <p><strong>Severity Level:</strong> {{ .Labels.severity }}</p>
+    <p><strong>Alert Type:</strong> {{ .Labels.alertname }}</p>
+    <p><strong>Affected Host:</strong> {{ .Labels.instance }}</p>
+    <p><strong>Affected Service:</strong> {{ .Labels.job }}</p>
+    <p><strong>Alert Subject:</strong> {{ .Annotations.summary }}</p>
+    <p><strong>Trigger Time:</strong> {{ .StartsAt.Format "2006-01-02 15:04:05" }}</p>
+</div>
+<!-- End of OpenIM Alert -->
+{{ end }}
+{{ end }}

config/instance-down-rules.yml

@@ -0,0 +1,22 @@
+groups:
+  - name: instance_down
+    rules:
+      - alert: InstanceDown
+        expr: up == 0
+        for: 1m
+        labels:
+          severity: critical
+        annotations:
+          summary: "Instance {{ $labels.instance }} down"
+          description: "{{ $labels.instance }} of job {{ $labels.job }} has been down for more than 1 minutes."
+
+  - name: database_insert_failure_alerts
+    rules:
+      - alert: DatabaseInsertFailed
+        expr: (increase(msg_insert_redis_failed_total[5m]) > 0) or (increase(msg_insert_mongo_failed_total[5m]) > 0)
+        for: 1m
+        labels:
+          severity: critical
+        annotations:
+          summary: "Increase in MsgInsertRedisFailedCounter or MsgInsertMongoFailedCounter detected"
+          description: "Either MsgInsertRedisFailedCounter or MsgInsertMongoFailedCounter has increased in the last 5 minutes, indicating failures in message insert operations to Redis or MongoDB,maybe the redis or mongodb is crash."

config/prometheus.yml

@@ -0,0 +1,85 @@
+# my global config
+global:
+  scrape_interval:     15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
+  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
+  # scrape_timeout is set to the global default (10s).
+
+# Alertmanager configuration
+alerting:
+  alertmanagers:
+    - static_configs:
+        - targets: ['172.28.0.1:19093']
+
+# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
+rule_files:
+  - "instance-down-rules.yml"
+# - "first_rules.yml"
+# - "second_rules.yml"
+
+# A scrape configuration containing exactly one endpoint to scrape:
+# Here it's Prometheus itself.
+scrape_configs:
+  # The job name is added as a label "job='job_name'"" to any timeseries scraped from this config.
+  # Monitored information captured by prometheus
+  - job_name: 'node-exporter'
+    static_configs:
+      - targets: [ '172.28.0.1:19100' ]
+        labels:
+          namespace: 'default'
+
+  # prometheus fetches application services
+  - job_name: 'openimserver-openim-api'
+    static_configs:
+      - targets: [ '172.28.0.1:20100' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-msggateway'
+    static_configs:
+      - targets: [ '172.28.0.1:20140' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-msgtransfer'
+    static_configs:
+      - targets: [ 172.28.0.1:21400, 172.28.0.1:21401, 172.28.0.1:21402, 172.28.0.1:21403 ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-push'
+    static_configs:
+      - targets: [ '172.28.0.1:20170' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-auth'
+    static_configs:
+      - targets: [ '172.28.0.1:20160' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-conversation'
+    static_configs:
+      - targets: [ '172.28.0.1:20230' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-friend'
+    static_configs:
+      - targets: [ '172.28.0.1:20120' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-group'
+    static_configs:
+      - targets: [ '172.28.0.1:20150' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-msg'
+    static_configs:
+      - targets: [ '172.28.0.1:20130' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-third'
+    static_configs:
+      - targets: [ '172.28.0.1:21301' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-user'
+    static_configs:
+      - targets: [ '172.28.0.1:20110' ]
+        labels:
+          namespace: 'default'

deployments/README.md

@@ -1,52 +1,48 @@
-# OpenIM 应用容器化部署指南
+# OpenIM Application Containerization Deployment Guide
 
-OpenIM 支持很多种集群化部署方式，包括但不限于 helm, sealos, kubeam, kubesphere, kubeflow, kuboard, kubespray, k3s, k3d, k3c, k3sup, k3v, k3x
+OpenIM supports a variety of cluster deployment methods, including but not limited to `helm`, `sealos`, `kustomize`
 
-**目前还在开发这个模块，预计 v3.2.0 之前会有一个集群方案。**
+Various contributors, as well as previous official releases, have provided some referenceable solutions:
 
-目前各个贡献者，以及之前的官方有出过一些可以参考的方案：
++ [k8s-jenkins Repository](https://github.com/OpenIMSDK/k8s-jenkins)
++ [open-im-server-k8s-deploy Repository](https://github.com/openimsdk/open-im-server-k8s-deploy)
++ [openim-charts Repository](https://github.com/OpenIMSDK/openim-charts)
++ [deploy-openim Repository](https://github.com/showurl/deploy-openim)
 
-- https://github.com/OpenIMSDK/k8s-jenkins
-- https://github.com/openimsdk/open-im-server-k8s-deploy
-- https://github.com/OpenIMSDK/openim-charts
-- https://github.com/showurl/deploy-openim
-
-
-### 依赖检查
+### Dependency Check
 
 ```bash
 Kubernetes: >= 1.16.0-0
 Helm: >= 3.0
 ```
 
+### Minimum Configuration
 
-### 最低配置
+The recommended minimum configuration for a production environment is as follows:
 
-建议生产环境的最低配置如下：
-
-```bash
+```yaml
 CPU: 4
 Memory: 8G
 Disk: 100G
 ```
 
-## 生成配置文件
+## Configuration File Generation
 
-我们将自动文件全部自动化处理了，所以生成配置文件对于 openim 来说是可选的，但是如果你想要自定义配置，可以参考下面的步骤：
+We have automated all the files, making the generation of configuration files optional for OpenIM. However, if you desire custom configurations, you can follow the steps below:
 
 ```bash
 $ make init
-# 或者是使用脚本:
+# Alternatively, use script:
 # ./scripts/init-config.sh
 ```
-此时会帮你在 `deployments/openim/config` 目录下生成配置文件，你可以根据自己的需求进行修改。
 
+At this point, configuration files will be generated under `deployments/openim/config`, which you can modify as per your requirements.
 
-## 集群搭建
+## Cluster Setup
 
-如果你已经有了一个 `kubernetes` 集群，或者是你希望自己从头开始搭建一个 `kubernetes` 那么你可以直接跳过这一步。
+If you already have a `kubernetes` cluster, or if you wish to build a `kubernetes` cluster from scratch, you can skip this step.
 
-为了快速开始，我使用 [sealos](https://github.com/labring/sealos) 来快速搭建集群，sealos 底层也是对 kubeadm 的封装:
+For a quick start, I used [sealos](https://github.com/labring/sealos) to rapidly set up the cluster, with sealos also being a wrapper for kubeadm at its core:
 
 ```bash
 $ SEALOS_VERSION=`curl -s https://api.github.com/repos/labring/sealos/releases/latest | grep -oE '"tag_name": "[^"]+"' | head -n1 | cut -d'"' -f4` && \
@@ -54,21 +50,20 @@ $ SEALOS_VERSION=`curl -s https://api.github.com/repos/labring/sealos/releases/l
   sh -s ${SEALOS_VERSION} labring/sealos
 ```
 
-**支持的版本：**
+**Supported Versions:**
 
 + docker: `labring/kubernetes-docker`:(v1.24.0~v1.27.0)
 + containerd: `labring/kubernetes`:(v1.24.0~v1.27.0)
 
+#### Cluster Installation:
 
-#### 安装集群：
+Cluster details are as follows:
 
-集群的信息如下：
-
-| 机器名   | IP地址          | 系统信息                                                                                                    |
-|---------|-----------------|------------------------------------------------------------------------------------------------------------|
-| master01| 10.0.0.9   | Linux VM-0-9-ubuntu 5.15.0-76-generic #83-Ubuntu SMP Thu Jun 15 19:16:32 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux |
-| node01  | 10.0.0.4   | Linux VM-0-9-ubuntu 5.15.0-76-generic #83-Ubuntu SMP Thu Jun 15 19:16:32 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux |
-| node02  | 10.0.0.10  | Linux VM-0-9-ubuntu 5.15.0-76-generic #83-Ubuntu SMP Thu Jun 15 19:16:32 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux |
+| Hostname | IP Address | System Info                                                  |
+| -------- | ---------- | ------------------------------------------------------------ |
+| master01 | 10.0.0.9   | `Linux VM-0-9-ubuntu 5.15.0-76-generic #83-Ubuntu SMP Thu Jun 15 19:16:32 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux` |
+| node01   | 10.0.0.4   | Similar to master01                                          |
+| node02   | 10.0.0.10  | Similar to master01                                          |
 
 ```bash
 $ export CLUSTER_USERNAME=ubuntu
@@ -80,40 +75,103 @@ $ sudo sealos run labring/kubernetes:v1.25.0 labring/helm:v3.8.2 labring/calico:
     -p "$CLUSTER_PASSWORD"
 ```
 
-> **Node**
-> 卸载的方式：使用 `kubeadm` 卸载并不会清除 `etcd` 和 `cni` 相关，所以需要手动清除，或者使用 `sealos` 卸载。
+> **Node** Uninstallation method: using `kubeadm` for uninstallation does not remove `etcd` and `cni` related configurations. Manual clearance or using `sealos` for uninstallation is needed.
+>
 > ```bash
-> sealos reset
+> $ sealos reset
 > ```
 
-### 安装 helm
+If you are local, you can also use Kind and Minikube to test, for example, using Kind:
 
-helm通过打包的方式，支持发布的版本管理和控制，很大程度上简化了Kubernetes应用的部署和管理。
+```bash
+$ GO111MODULE="on" go get sigs.k8s.io/kind@v0.11.1
+$ kind create cluster
+```
 
+### Installing helm
 
-**使用脚本：**
+Helm simplifies the deployment and management of Kubernetes applications to a large extent by offering version control and release management through packaging.
+
+**Using Script:**
 
 ```bash
 $ curl https://raw.githubusercontent.com/helm/helm/main/scripts/get-helm-3 | bash
 ```
 
-**添加仓库：**
+**Adding Repository:**
 
 ```bash
 $ helm repo add brigade https://openimsdk.github.io/openim-charts
 ```
 
-### OpenIM 的镜像策略
+### OpenIM Image Strategy
 
-自动化提供的 aliyun, ghcr, docker hub: https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/images.md
+Automated offerings include aliyun, ghcr, docker hub: [Image Documentation](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/images.md)
 
-**本地化测试构建方法：**
+**Local Test Build Method:**
 
 ```bash
 $ make image
 ```
 
+> This command assists in quickly building the required images locally. For a detailed build strategy, refer to the [Build Documentation](https://github.com/openimsdk/open-im-server/blob/main/build/README.md).
 
-### 容器化安装
+## Installation
 
-具体安装步骤如下：
+Explore our Helm-Charts repository and read through: [Helm-Charts Repository](https://github.com/openimsdk/helm-charts)
+
+
+Using the helm charts repository, you can ignore the following configuration, but if you want to just use the server and scale on top of it, you can go ahead:
+
+**Use the Helm template to generate the deployment yaml file: `openim-charts.yaml`**
+
+**Gen Image:**
+
+```bash
+../scripts/genconfig.sh ../scripts/install/environment.sh ./templates/helm-image.yaml > ./charts/generated-configs/helm-image.yaml
+```
+
+**Gen Charts:**
+
+```bash
+for chart in ./charts/*/; do
+    if [[ "$chart" == *"generated-configs"* || "$chart" == *"helmfile.yaml"* ]]; then
+        continue
+    fi
+
+    if [ -f "${chart}values.yaml" ]; then
+        helm template "$chart" -f "./charts/generated-configs/helm-image.yaml" -f "./charts/generated-configs/config.yaml" -f "./charts/generated-configs/notification.yaml" >> openim-charts.yaml
+    else
+        helm template "$chart" >> openim-charts.yaml
+    fi
+done
+```
+
+**Use Helmfile:**
+
+```bash
+GO111MODULE=on go get github.com/roboll/helmfile@latest
+```
+
+```bash
+export MYSQL_ADDRESS=im-mysql
+export MYSQL_PORT=3306
+export MONGO_ADDRESS=im-mongo
+export MONGO_PORT=27017
+export REDIS_ADDRESS=im-redis-master
+export REDIS_PORT=6379
+export KAFKA_ADDRESS=im-kafka
+export KAFKA_PORT=9092
+export OBJECT_APIURL="https://openim.server.com/api"
+export MINIO_ENDPOINT="http://im-minio:9000"
+export MINIO_SIGN_ENDPOINT="https://openim.server.com/im-minio-api"
+
+mkdir ./charts/generated-configs
+../scripts/genconfig.sh ../scripts/install/environment.sh ./templates/openim.yaml > ./charts/generated-configs/config.yaml
+cp ../config/notification.yaml ./charts/generated-configs/notification.yaml
+../scripts/genconfig.sh ../scripts/install/environment.sh ./templates/helm-image.yaml > ./charts/generated-configs/helm-image.yaml
+```
+
+```bash
+helmfile apply
+```

deployments/charts/helmfile.yaml

@@ -0,0 +1,20 @@
+{{- define "defaultValues" -}}
+- ./generated-configs/helm-image.yaml
+- ./generated-configs/config.yaml
+- ./generated-configs/notification.yaml
+{{- end -}}
+
+{{- define "defaultRelease" -}}
+namespace: openim
+chart: ./{{ .name }}
+values:
+  - ./{{ .name }}/values.yaml
+  {{- template "defaultValues" . }}
+{{- end -}}
+
+releases:
+{{- $apps := list "openim-api" "openim-msggateway" "openim-msgtransfer" "openim-push" "openim-rpc-auth" "openim-rpc-conversation" "openim-rpc-friend" "openim-rpc-group" "openim-rpc-msg" "openim-rpc-third" "openim-rpc-user" }}
+{{- range $app := $apps }}
+  - name: {{ $app }}
+    {{- template "defaultRelease" dict "name" $app }}
+{{- end }}

deployments/charts/openim-api/Chart.yaml

@@ -0,0 +1,39 @@
+apiVersion: v2
+name: openim-api
+description: A OpenIM Api Helm chart for Kubernetes
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+# Versions are expected to follow Semantic Versioning (https://semver.org/)
+version: 0.1.0
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application. Versions are not expected to
+# follow Semantic Versioning. They should reflect the version the application is using.
+# It is recommended to use it with quotes.
+appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-api/templates/NOTES.txt

@@ -6,16 +6,16 @@
   {{- end }}
 {{- end }}
 {{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "openim-server.fullname" . }})
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "openim-api.fullname" . }})
   export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
   echo http://$NODE_IP:$NODE_PORT
 {{- else if contains "LoadBalancer" .Values.service.type }}
      NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "openim-server.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "openim-server.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "openim-api.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "openim-api.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
   echo http://$SERVICE_IP:{{ .Values.service.port }}
 {{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "openim-server.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "openim-api.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
   export CONTAINER_PORT=$(kubectl get pod --namespace {{ .Release.Namespace }} $POD_NAME -o jsonpath="{.spec.containers[0].ports[0].containerPort}")
   echo "Visit http://127.0.0.1:8080 to use your application"
   kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:$CONTAINER_PORT

deployments/charts/openim-api/templates/_helpers.tpl

@@ -1,7 +1,7 @@
 {{/*
 Expand the name of the chart.
 */}}
-{{- define "openim-server.name" -}}
+{{- define "openim-api.name" -}}
 {{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
 {{- end }}
 
@@ -10,7 +10,7 @@ Create a default fully qualified app name.
 We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
 If release name contains chart name it will be used as a full name.
 */}}
-{{- define "openim-server.fullname" -}}
+{{- define "openim-api.fullname" -}}
 {{- if .Values.fullnameOverride }}
 {{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
 {{- else }}
@@ -26,16 +26,16 @@ If release name contains chart name it will be used as a full name.
 {{/*
 Create chart name and version as used by the chart label.
 */}}
-{{- define "openim-server.chart" -}}
+{{- define "openim-api.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
 {{- end }}
 
 {{/*
 Common labels
 */}}
-{{- define "openim-server.labels" -}}
-helm.sh/chart: {{ include "openim-server.chart" . }}
-{{ include "openim-server.selectorLabels" . }}
+{{- define "openim-api.labels" -}}
+helm.sh/chart: {{ include "openim-api.chart" . }}
+{{ include "openim-api.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
 app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
@@ -45,17 +45,17 @@ app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{/*
 Selector labels
 */}}
-{{- define "openim-server.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "openim-server.name" . }}
+{{- define "openim-api.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "openim-api.name" . }}
 app.kubernetes.io/instance: {{ .Release.Name }}
 {{- end }}
 
 {{/*
 Create the name of the service account to use
 */}}
-{{- define "openim-server.serviceAccountName" -}}
+{{- define "openim-api.serviceAccountName" -}}
 {{- if .Values.serviceAccount.create }}
-{{- default (include "openim-server.fullname" .) .Values.serviceAccount.name }}
+{{- default (include "openim-api.fullname" .) .Values.serviceAccount.name }}
 {{- else }}
 {{- default "default" .Values.serviceAccount.name }}
 {{- end }}

deployments/charts/openim-api/templates/app-cm.yaml

@@ -0,0 +1,13 @@
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: openim-cm
+data:
+  config.yaml: |+
+    {{- with .Values.config }}
+        {{- toYaml . | nindent 4 }}
+    {{- end }}
+  notification.yaml: |+
+    {{- with .Values.notification }}
+        {{- toYaml . | nindent 4 }}
+    {{- end }}

deployments/charts/openim-api/templates/deployment.yaml

@@ -0,0 +1,72 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "openim-api.fullname" . }}
+  labels:
+    {{- include "openim-api.labels" . | nindent 4 }}
+spec:
+  {{- if not .Values.autoscaling.enabled }}
+  replicas: {{ .Values.replicaCount }}
+  {{- end }}
+  selector:
+    matchLabels:
+      {{- include "openim-api.selectorLabels" . | nindent 6 }}
+  template:
+    metadata:
+      {{- with .Values.podAnnotations }}
+      annotations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      labels:
+        {{- include "openim-api.selectorLabels" . | nindent 8 }}
+    spec:
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      serviceAccountName: {{ include "openim-api.serviceAccountName" . }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          ports:
+            - name: http
+              containerPort: 80
+              protocol: TCP
+          #livenessProbe:
+          #  httpGet:
+          #    path: /
+          #    port: http
+          #readinessProbe:
+          #  httpGet:
+          #    path: /
+          #    port: http
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+          volumeMounts:
+            - mountPath: /openim/openim-server/config/config.yaml
+              name: config
+              subPath: config.yaml
+            - mountPath: /openim/openim-server/config/
+              name: config
+              subPath: notification.yaml
+      volumes:
+        - name: config
+          configMap:
+            name: openim-cm
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

deployments/charts/openim-api/templates/hpa.yaml

@@ -1,29 +1,15 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 {{- if .Values.autoscaling.enabled }}
 apiVersion: autoscaling/v2beta1
 kind: HorizontalPodAutoscaler
 metadata:
-  name: {{ include "openim-server.fullname" . }}
+  name: {{ include "openim-api.fullname" . }}
   labels:
-    {{- include "openim-server.labels" . | nindent 4 }}
+    {{- include "openim-api.labels" . | nindent 4 }}
 spec:
   scaleTargetRef:
     apiVersion: apps/v1
     kind: Deployment
-    name: {{ include "openim-server.fullname" . }}
+    name: {{ include "openim-api.fullname" . }}
   minReplicas: {{ .Values.autoscaling.minReplicas }}
   maxReplicas: {{ .Values.autoscaling.maxReplicas }}
   metrics:

deployments/charts/openim-api/templates/ingress.yaml

@@ -1,19 +1,5 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 {{- if .Values.ingress.enabled -}}
-{{- $fullName := include "openim-server.fullname" . -}}
+{{- $fullName := include "openim-api.fullname" . -}}
 {{- $svcPort := .Values.service.port -}}
 {{- if and .Values.ingress.className (not (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion)) }}
   {{- if not (hasKey .Values.ingress.annotations "kubernetes.io/ingress.class") }}
@@ -31,7 +17,7 @@ kind: Ingress
 metadata:
   name: {{ $fullName }}
   labels:
-    {{- include "openim-server.labels" . | nindent 4 }}
+    {{- include "openim-api.labels" . | nindent 4 }}
   {{- with .Values.ingress.annotations }}
   annotations:
     {{- toYaml . | nindent 4 }}

deployments/charts/openim-api/templates/service.yaml

@@ -0,0 +1,15 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "openim-api.fullname" . }}
+  labels:
+    {{- include "openim-api.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    - port: {{ .Values.service.port }}
+      targetPort: http
+      protocol: TCP
+      name: http
+  selector:
+    {{- include "openim-api.selectorLabels" . | nindent 4 }}

deployments/charts/openim-api/templates/serviceaccount.yaml

@@ -0,0 +1,12 @@
+{{- if .Values.serviceAccount.create -}}
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: {{ include "openim-api.serviceAccountName" . }}
+  labels:
+    {{- include "openim-api.labels" . | nindent 4 }}
+  {{- with .Values.serviceAccount.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+{{- end }}

deployments/charts/openim-api/values.yaml

@@ -0,0 +1,86 @@
+# Default values for openim-api.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  repository: ghcr.io/openimsdk/openim-api
+  pullPolicy: IfNotPresent
+  # Overrides the image tag whose default is the chart appVersion.
+  tag: ""
+
+imagePullSecrets: []
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: false
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: ""
+
+podAnnotations: {}
+
+podSecurityContext: {}
+  # fsGroup: 2000
+
+securityContext: {}
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+ingress:
+  enabled: false
+  className: "nginx"
+  annotations:
+  # kubernetes.io/ingress.class: nginx
+  # kubernetes.io/tls-acme: "true"
+  hosts:
+    - host: chart-example.local
+      paths:
+        - path: /
+          pathType: ImplementationSpecific
+  tls: []
+  #  - secretName: chart-example-tls
+  #    hosts:
+  #      - chart-example.local
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+autoscaling:
+  enabled: false
+  minReplicas: 1
+  maxReplicas: 100
+  targetCPUUtilizationPercentage: 80
+  # targetMemoryUtilizationPercentage: 80
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}
+
+notification:
+
+config:

deployments/charts/openim-msggateway/.helmignore

@@ -0,0 +1,23 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*.orig
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/

deployments/charts/openim-msggateway/Chart.yaml

@@ -1,19 +1,5 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 apiVersion: v2
-name: openim-server
+name: openim-msggateway
 description: A Helm chart for Kubernetes
 
 # A chart can be either an 'application' or a 'library' chart.
@@ -35,7 +21,7 @@ version: 0.1.0
 # incremented each time you make changes to the application. Versions are not expected to
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
-appVersion: "default"
+appVersion: "1.16.0"
 
 icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
 
@@ -50,25 +36,4 @@ keywords:
 
 sources:
   - "https://github.com/openimsdk/open-im-server"
-  - "https://github.com/openimsdk/openim-sdk-core"
-  - "https://github.com/openimsdk/openim-docker"
-
-dependencies:
-  - name: mysql
-    version: 8.0.25
-    repository: https://charts.bitnami.com/bitnami
-  - name: redis
-    version: 14.6.1
-    repository: https://charts.bitnami.com/bitnami
-  - name: mongodb
-    version: 10.1.0
-    repository: https://charts.bitnami.com/bitnami
-  - name: kafka
-    version: 14.1.0
-    repository: https://charts.bitnami.com/bitnami
-  - name: minio
-    version: 8.1.2
-    repository: https://charts.bitnami.com/bitnami
-  - name: zookeeper
-    version: 5.17.0
-    repository: https://charts.bitnami.com/bitnami
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-msggateway/templates/NOTES.txt

@@ -0,0 +1,22 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range $host := .Values.ingress.hosts }}
+  {{- range .paths }}
+  http{{ if $.Values.ingress.tls }}s{{ end }}://{{ $host.host }}{{ .path }}
+  {{- end }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "openim-msggateway.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "openim-msggateway.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "openim-msggateway.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "openim-msggateway.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  export CONTAINER_PORT=$(kubectl get pod --namespace {{ .Release.Namespace }} $POD_NAME -o jsonpath="{.spec.containers[0].ports[0].containerPort}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:$CONTAINER_PORT
+{{- end }}

deployments/charts/openim-msggateway/templates/_helpers.tpl

@@ -0,0 +1,62 @@
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "openim-msggateway.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "openim-msggateway.fullname" -}}
+{{- if .Values.fullnameOverride }}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- $name := default .Chart.Name .Values.nameOverride }}
+{{- if contains $name .Release.Name }}
+{{- .Release.Name | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" }}
+{{- end }}
+{{- end }}
+{{- end }}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "openim-msggateway.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Common labels
+*/}}
+{{- define "openim-msggateway.labels" -}}
+helm.sh/chart: {{ include "openim-msggateway.chart" . }}
+{{ include "openim-msggateway.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end }}
+
+{{/*
+Selector labels
+*/}}
+{{- define "openim-msggateway.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "openim-msggateway.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end }}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "openim-msggateway.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create }}
+{{- default (include "openim-msggateway.fullname" .) .Values.serviceAccount.name }}
+{{- else }}
+{{- default "default" .Values.serviceAccount.name }}
+{{- end }}
+{{- end }}

deployments/charts/openim-msggateway/templates/deployment.yaml

@@ -15,16 +15,16 @@
 apiVersion: apps/v1
 kind: Deployment
 metadata:
-  name: {{ include "openim-server.fullname" . }}
+  name: {{ include "openim-msggateway.fullname" . }}
   labels:
-    {{- include "openim-server.labels" . | nindent 4 }}
+    {{- include "openim-msggateway.labels" . | nindent 4 }}
 spec:
   {{- if not .Values.autoscaling.enabled }}
   replicas: {{ .Values.replicaCount }}
   {{- end }}
   selector:
     matchLabels:
-      {{- include "openim-server.selectorLabels" . | nindent 6 }}
+      {{- include "openim-msggateway.selectorLabels" . | nindent 6 }}
   template:
     metadata:
       {{- with .Values.podAnnotations }}
@@ -32,13 +32,13 @@ spec:
         {{- toYaml . | nindent 8 }}
       {{- end }}
       labels:
-        {{- include "openim-server.selectorLabels" . | nindent 8 }}
+        {{- include "openim-msggateway.selectorLabels" . | nindent 8 }}
     spec:
       {{- with .Values.imagePullSecrets }}
       imagePullSecrets:
         {{- toYaml . | nindent 8 }}
       {{- end }}
-      serviceAccountName: {{ include "openim-server.serviceAccountName" . }}
+      serviceAccountName: {{ include "openim-msggateway.serviceAccountName" . }}
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
       containers:
@@ -51,16 +51,30 @@ spec:
             - name: http
               containerPort: 80
               protocol: TCP
-          livenessProbe:
-            httpGet:
-              path: /
-              port: http
-          readinessProbe:
-            httpGet:
-              path: /
-              port: http
+            - name: rpc
+              containerPort: 88
+              protocol: TCP
+          #livenessProbe:
+          #  httpGet:
+          #    path: /
+          #    port: http
+          #readinessProbe:
+          #  httpGet:
+          #    path: /
+          #    port: http
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
+          volumeMounts:
+            - mountPath: /openim/openim-server/config/config.yaml
+              name: config
+              subPath: config.yaml
+            - mountPath: /openim/openim-server/config/
+              name: config
+              subPath: notification.yaml
+      volumes:
+        - name: config
+          configMap:
+            name: openim-cm
       {{- with .Values.nodeSelector }}
       nodeSelector:
         {{- toYaml . | nindent 8 }}

deployments/charts/openim-msggateway/templates/hpa.yaml

@@ -0,0 +1,28 @@
+{{- if .Values.autoscaling.enabled }}
+apiVersion: autoscaling/v2beta1
+kind: HorizontalPodAutoscaler
+metadata:
+  name: {{ include "openim-msggateway.fullname" . }}
+  labels:
+    {{- include "openim-msggateway.labels" . | nindent 4 }}
+spec:
+  scaleTargetRef:
+    apiVersion: apps/v1
+    kind: Deployment
+    name: {{ include "openim-msggateway.fullname" . }}
+  minReplicas: {{ .Values.autoscaling.minReplicas }}
+  maxReplicas: {{ .Values.autoscaling.maxReplicas }}
+  metrics:
+    {{- if .Values.autoscaling.targetCPUUtilizationPercentage }}
+    - type: Resource
+      resource:
+        name: cpu
+        targetAverageUtilization: {{ .Values.autoscaling.targetCPUUtilizationPercentage }}
+    {{- end }}
+    {{- if .Values.autoscaling.targetMemoryUtilizationPercentage }}
+    - type: Resource
+      resource:
+        name: memory
+        targetAverageUtilization: {{ .Values.autoscaling.targetMemoryUtilizationPercentage }}
+    {{- end }}
+{{- end }}

deployments/charts/openim-msggateway/templates/ingress.yaml

@@ -0,0 +1,61 @@
+{{- if .Values.ingress.enabled -}}
+{{- $fullName := include "openim-msggateway.fullname" . -}}
+{{- $svcPort := .Values.service.port -}}
+{{- if and .Values.ingress.className (not (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion)) }}
+  {{- if not (hasKey .Values.ingress.annotations "kubernetes.io/ingress.class") }}
+  {{- $_ := set .Values.ingress.annotations "kubernetes.io/ingress.class" .Values.ingress.className}}
+  {{- end }}
+{{- end }}
+{{- if semverCompare ">=1.19-0" .Capabilities.KubeVersion.GitVersion -}}
+apiVersion: networking.k8s.io/v1
+{{- else if semverCompare ">=1.14-0" .Capabilities.KubeVersion.GitVersion -}}
+apiVersion: networking.k8s.io/v1beta1
+{{- else -}}
+apiVersion: extensions/v1beta1
+{{- end }}
+kind: Ingress
+metadata:
+  name: {{ $fullName }}
+  labels:
+    {{- include "openim-msggateway.labels" . | nindent 4 }}
+  {{- with .Values.ingress.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+spec:
+  {{- if and .Values.ingress.className (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion) }}
+  ingressClassName: {{ .Values.ingress.className }}
+  {{- end }}
+  {{- if .Values.ingress.tls }}
+  tls:
+    {{- range .Values.ingress.tls }}
+    - hosts:
+        {{- range .hosts }}
+        - {{ . | quote }}
+        {{- end }}
+      secretName: {{ .secretName }}
+    {{- end }}
+  {{- end }}
+  rules:
+    {{- range .Values.ingress.hosts }}
+    - host: {{ .host | quote }}
+      http:
+        paths:
+          {{- range .paths }}
+          - path: {{ .path }}
+            {{- if and .pathType (semverCompare ">=1.18-0" $.Capabilities.KubeVersion.GitVersion) }}
+            pathType: {{ .pathType }}
+            {{- end }}
+            backend:
+              {{- if semverCompare ">=1.19-0" $.Capabilities.KubeVersion.GitVersion }}
+              service:
+                name: {{ $fullName }}
+                port:
+                  number: {{ $svcPort }}
+              {{- else }}
+              serviceName: {{ $fullName }}
+              servicePort: {{ $svcPort }}
+              {{- end }}
+          {{- end }}
+    {{- end }}
+{{- end }}

deployments/charts/openim-msggateway/templates/service.yaml

@@ -0,0 +1,19 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "openim-msggateway.fullname" . }}
+  labels:
+    {{- include "openim-msggateway.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    - port: {{ .Values.service.port }}
+      targetPort: http
+      protocol: TCP
+      name: http
+    - port: 88
+      targetPort: rpc
+      protocol: TCP
+      name: rpc
+  selector:
+    {{- include "openim-msggateway.selectorLabels" . | nindent 4 }}

deployments/charts/openim-msggateway/templates/serviceaccount.yaml

@@ -0,0 +1,12 @@
+{{- if .Values.serviceAccount.create -}}
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: {{ include "openim-msggateway.serviceAccountName" . }}
+  labels:
+    {{- include "openim-msggateway.labels" . | nindent 4 }}
+  {{- with .Values.serviceAccount.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+{{- end }}

deployments/charts/openim-msggateway/values.yaml

@@ -0,0 +1,82 @@
+# Default values for openim-msggateway.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  repository: ghcr.io/openimsdk/openim-msggateway
+  pullPolicy: IfNotPresent
+  # Overrides the image tag whose default is the chart appVersion.
+  tag: ""
+
+imagePullSecrets: []
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: false
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: ""
+
+podAnnotations: {}
+
+podSecurityContext: {}
+  # fsGroup: 2000
+
+securityContext: {}
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+ingress:
+  enabled: false
+  className: "nginx"
+  annotations:
+  # kubernetes.io/ingress.class: nginx
+  # kubernetes.io/tls-acme: "true"
+  hosts:
+    - host: chart-example.local
+      paths:
+        - path: /
+          pathType: ImplementationSpecific
+  tls: []
+  #  - secretName: chart-example-tls
+  #    hosts:
+  #      - chart-example.local
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+autoscaling:
+  enabled: false
+  minReplicas: 1
+  maxReplicas: 100
+  targetCPUUtilizationPercentage: 80
+  # targetMemoryUtilizationPercentage: 80
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

deployments/charts/openim-msgtransfer/.helmignore

@@ -0,0 +1,23 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*.orig
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/

deployments/charts/openim-msgtransfer/Chart.yaml

@@ -0,0 +1,39 @@
+apiVersion: v2
+name: openim-msgtransfer
+description: A Helm chart for Kubernetes
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+# Versions are expected to follow Semantic Versioning (https://semver.org/)
+version: 0.1.0
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application. Versions are not expected to
+# follow Semantic Versioning. They should reflect the version the application is using.
+# It is recommended to use it with quotes.
+appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-msgtransfer/templates/NOTES.txt

@@ -0,0 +1,22 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range $host := .Values.ingress.hosts }}
+  {{- range .paths }}
+  http{{ if $.Values.ingress.tls }}s{{ end }}://{{ $host.host }}{{ .path }}
+  {{- end }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "openim-msgtransfer.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "openim-msgtransfer.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "openim-msgtransfer.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "openim-msgtransfer.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  export CONTAINER_PORT=$(kubectl get pod --namespace {{ .Release.Namespace }} $POD_NAME -o jsonpath="{.spec.containers[0].ports[0].containerPort}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:$CONTAINER_PORT
+{{- end }}

deployments/charts/openim-msgtransfer/templates/_helpers.tpl

@@ -0,0 +1,62 @@
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "openim-msgtransfer.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "openim-msgtransfer.fullname" -}}
+{{- if .Values.fullnameOverride }}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- $name := default .Chart.Name .Values.nameOverride }}
+{{- if contains $name .Release.Name }}
+{{- .Release.Name | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" }}
+{{- end }}
+{{- end }}
+{{- end }}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "openim-msgtransfer.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Common labels
+*/}}
+{{- define "openim-msgtransfer.labels" -}}
+helm.sh/chart: {{ include "openim-msgtransfer.chart" . }}
+{{ include "openim-msgtransfer.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end }}
+
+{{/*
+Selector labels
+*/}}
+{{- define "openim-msgtransfer.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "openim-msgtransfer.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end }}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "openim-msgtransfer.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create }}
+{{- default (include "openim-msgtransfer.fullname" .) .Values.serviceAccount.name }}
+{{- else }}
+{{- default "default" .Values.serviceAccount.name }}
+{{- end }}
+{{- end }}

deployments/charts/openim-msgtransfer/templates/deployment.yaml

@@ -0,0 +1,72 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "openim-msgtransfer.fullname" . }}
+  labels:
+    {{- include "openim-msgtransfer.labels" . | nindent 4 }}
+spec:
+  {{- if not .Values.autoscaling.enabled }}
+  replicas: {{ .Values.replicaCount }}
+  {{- end }}
+  selector:
+    matchLabels:
+      {{- include "openim-msgtransfer.selectorLabels" . | nindent 6 }}
+  template:
+    metadata:
+      {{- with .Values.podAnnotations }}
+      annotations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      labels:
+        {{- include "openim-msgtransfer.selectorLabels" . | nindent 8 }}
+    spec:
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      serviceAccountName: {{ include "openim-msgtransfer.serviceAccountName" . }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          ports:
+            - name: http
+              containerPort: 80
+              protocol: TCP
+          #livenessProbe:
+          #  httpGet:
+          #    path: /
+          #    port: http
+          #readinessProbe:
+          #  httpGet:
+          #    path: /
+          #    port: http
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+          volumeMounts:
+            - mountPath: /openim/openim-server/config/config.yaml
+              name: config
+              subPath: config.yaml
+            - mountPath: /openim/openim-server/config/
+              name: config
+              subPath: notification.yaml
+      volumes:
+        - name: config
+          configMap:
+            name: openim-cm
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

deployments/charts/openim-msgtransfer/templates/hpa.yaml

@@ -0,0 +1,28 @@
+{{- if .Values.autoscaling.enabled }}
+apiVersion: autoscaling/v2beta1
+kind: HorizontalPodAutoscaler
+metadata:
+  name: {{ include "openim-msgtransfer.fullname" . }}
+  labels:
+    {{- include "openim-msgtransfer.labels" . | nindent 4 }}
+spec:
+  scaleTargetRef:
+    apiVersion: apps/v1
+    kind: Deployment
+    name: {{ include "openim-msgtransfer.fullname" . }}
+  minReplicas: {{ .Values.autoscaling.minReplicas }}
+  maxReplicas: {{ .Values.autoscaling.maxReplicas }}
+  metrics:
+    {{- if .Values.autoscaling.targetCPUUtilizationPercentage }}
+    - type: Resource
+      resource:
+        name: cpu
+        targetAverageUtilization: {{ .Values.autoscaling.targetCPUUtilizationPercentage }}
+    {{- end }}
+    {{- if .Values.autoscaling.targetMemoryUtilizationPercentage }}
+    - type: Resource
+      resource:
+        name: memory
+        targetAverageUtilization: {{ .Values.autoscaling.targetMemoryUtilizationPercentage }}
+    {{- end }}
+{{- end }}

deployments/charts/openim-msgtransfer/templates/ingress.yaml

@@ -0,0 +1,61 @@
+{{- if .Values.ingress.enabled -}}
+{{- $fullName := include "openim-msgtransfer.fullname" . -}}
+{{- $svcPort := .Values.service.port -}}
+{{- if and .Values.ingress.className (not (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion)) }}
+  {{- if not (hasKey .Values.ingress.annotations "kubernetes.io/ingress.class") }}
+  {{- $_ := set .Values.ingress.annotations "kubernetes.io/ingress.class" .Values.ingress.className}}
+  {{- end }}
+{{- end }}
+{{- if semverCompare ">=1.19-0" .Capabilities.KubeVersion.GitVersion -}}
+apiVersion: networking.k8s.io/v1
+{{- else if semverCompare ">=1.14-0" .Capabilities.KubeVersion.GitVersion -}}
+apiVersion: networking.k8s.io/v1beta1
+{{- else -}}
+apiVersion: extensions/v1beta1
+{{- end }}
+kind: Ingress
+metadata:
+  name: {{ $fullName }}
+  labels:
+    {{- include "openim-msgtransfer.labels" . | nindent 4 }}
+  {{- with .Values.ingress.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+spec:
+  {{- if and .Values.ingress.className (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion) }}
+  ingressClassName: {{ .Values.ingress.className }}
+  {{- end }}
+  {{- if .Values.ingress.tls }}
+  tls:
+    {{- range .Values.ingress.tls }}
+    - hosts:
+        {{- range .hosts }}
+        - {{ . | quote }}
+        {{- end }}
+      secretName: {{ .secretName }}
+    {{- end }}
+  {{- end }}
+  rules:
+    {{- range .Values.ingress.hosts }}
+    - host: {{ .host | quote }}
+      http:
+        paths:
+          {{- range .paths }}
+          - path: {{ .path }}
+            {{- if and .pathType (semverCompare ">=1.18-0" $.Capabilities.KubeVersion.GitVersion) }}
+            pathType: {{ .pathType }}
+            {{- end }}
+            backend:
+              {{- if semverCompare ">=1.19-0" $.Capabilities.KubeVersion.GitVersion }}
+              service:
+                name: {{ $fullName }}
+                port:
+                  number: {{ $svcPort }}
+              {{- else }}
+              serviceName: {{ $fullName }}
+              servicePort: {{ $svcPort }}
+              {{- end }}
+          {{- end }}
+    {{- end }}
+{{- end }}

deployments/charts/openim-msgtransfer/templates/service.yaml

@@ -0,0 +1,15 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "openim-msgtransfer.fullname" . }}
+  labels:
+    {{- include "openim-msgtransfer.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    - port: {{ .Values.service.port }}
+      targetPort: http
+      protocol: TCP
+      name: http
+  selector:
+    {{- include "openim-msgtransfer.selectorLabels" . | nindent 4 }}

deployments/charts/openim-msgtransfer/templates/serviceaccount.yaml

@@ -0,0 +1,12 @@
+{{- if .Values.serviceAccount.create -}}
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: {{ include "openim-msgtransfer.serviceAccountName" . }}
+  labels:
+    {{- include "openim-msgtransfer.labels" . | nindent 4 }}
+  {{- with .Values.serviceAccount.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+{{- end }}

deployments/charts/openim-msgtransfer/values.yaml

@@ -1,25 +1,11 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Default values for openim-server.
+# Default values for openim-msgtransfer.
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
 
 replicaCount: 1
 
 image:
-  repository: nginx
+  repository: ghcr.io/openimsdk/openim-msgtransfer
   pullPolicy: IfNotPresent
   # Overrides the image tag whose default is the chart appVersion.
   tag: ""
@@ -30,7 +16,7 @@ fullnameOverride: ""
 
 serviceAccount:
   # Specifies whether a service account should be created
-  create: true
+  create: false
   # Annotations to add to the service account
   annotations: {}
   # The name of the service account to use.

deployments/charts/openim-push/.helmignore

@@ -0,0 +1,23 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*.orig
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/

deployments/charts/openim-push/Chart.yaml

@@ -0,0 +1,39 @@
+apiVersion: v2
+name: openim-push
+description: A Helm chart for Kubernetes
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+# Versions are expected to follow Semantic Versioning (https://semver.org/)
+version: 0.1.0
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application. Versions are not expected to
+# follow Semantic Versioning. They should reflect the version the application is using.
+# It is recommended to use it with quotes.
+appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-push/templates/NOTES.txt

@@ -0,0 +1,22 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range $host := .Values.ingress.hosts }}
+  {{- range .paths }}
+  http{{ if $.Values.ingress.tls }}s{{ end }}://{{ $host.host }}{{ .path }}
+  {{- end }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "openim-push.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "openim-push.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "openim-push.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "openim-push.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  export CONTAINER_PORT=$(kubectl get pod --namespace {{ .Release.Namespace }} $POD_NAME -o jsonpath="{.spec.containers[0].ports[0].containerPort}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:$CONTAINER_PORT
+{{- end }}

deployments/charts/openim-push/templates/_helpers.tpl

@@ -0,0 +1,62 @@
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "openim-push.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "openim-push.fullname" -}}
+{{- if .Values.fullnameOverride }}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- $name := default .Chart.Name .Values.nameOverride }}
+{{- if contains $name .Release.Name }}
+{{- .Release.Name | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" }}
+{{- end }}
+{{- end }}
+{{- end }}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "openim-push.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Common labels
+*/}}
+{{- define "openim-push.labels" -}}
+helm.sh/chart: {{ include "openim-push.chart" . }}
+{{ include "openim-push.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end }}
+
+{{/*
+Selector labels
+*/}}
+{{- define "openim-push.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "openim-push.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end }}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "openim-push.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create }}
+{{- default (include "openim-push.fullname" .) .Values.serviceAccount.name }}
+{{- else }}
+{{- default "default" .Values.serviceAccount.name }}
+{{- end }}
+{{- end }}

deployments/charts/openim-push/templates/deployment.yaml

@@ -0,0 +1,72 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "openim-push.fullname" . }}
+  labels:
+    {{- include "openim-push.labels" . | nindent 4 }}
+spec:
+  {{- if not .Values.autoscaling.enabled }}
+  replicas: {{ .Values.replicaCount }}
+  {{- end }}
+  selector:
+    matchLabels:
+      {{- include "openim-push.selectorLabels" . | nindent 6 }}
+  template:
+    metadata:
+      {{- with .Values.podAnnotations }}
+      annotations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      labels:
+        {{- include "openim-push.selectorLabels" . | nindent 8 }}
+    spec:
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      serviceAccountName: {{ include "openim-push.serviceAccountName" . }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          ports:
+            - name: http
+              containerPort: 80
+              protocol: TCP
+          #livenessProbe:
+          #  httpGet:
+          #    path: /
+          #    port: http
+          #readinessProbe:
+          #  httpGet:
+          #    path: /
+          #    port: http
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+          volumeMounts:
+            - mountPath: /openim/openim-server/config/config.yaml
+              name: config
+              subPath: config.yaml
+            - mountPath: /openim/openim-server/config/
+              name: config
+              subPath: notification.yaml
+      volumes:
+        - name: config
+          configMap:
+            name: openim-cm
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

deployments/charts/openim-push/templates/hpa.yaml

@@ -0,0 +1,28 @@
+{{- if .Values.autoscaling.enabled }}
+apiVersion: autoscaling/v2beta1
+kind: HorizontalPodAutoscaler
+metadata:
+  name: {{ include "openim-push.fullname" . }}
+  labels:
+    {{- include "openim-push.labels" . | nindent 4 }}
+spec:
+  scaleTargetRef:
+    apiVersion: apps/v1
+    kind: Deployment
+    name: {{ include "openim-push.fullname" . }}
+  minReplicas: {{ .Values.autoscaling.minReplicas }}
+  maxReplicas: {{ .Values.autoscaling.maxReplicas }}
+  metrics:
+    {{- if .Values.autoscaling.targetCPUUtilizationPercentage }}
+    - type: Resource
+      resource:
+        name: cpu
+        targetAverageUtilization: {{ .Values.autoscaling.targetCPUUtilizationPercentage }}
+    {{- end }}
+    {{- if .Values.autoscaling.targetMemoryUtilizationPercentage }}
+    - type: Resource
+      resource:
+        name: memory
+        targetAverageUtilization: {{ .Values.autoscaling.targetMemoryUtilizationPercentage }}
+    {{- end }}
+{{- end }}

deployments/charts/openim-push/templates/ingress.yaml

@@ -0,0 +1,61 @@
+{{- if .Values.ingress.enabled -}}
+{{- $fullName := include "openim-push.fullname" . -}}
+{{- $svcPort := .Values.service.port -}}
+{{- if and .Values.ingress.className (not (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion)) }}
+  {{- if not (hasKey .Values.ingress.annotations "kubernetes.io/ingress.class") }}
+  {{- $_ := set .Values.ingress.annotations "kubernetes.io/ingress.class" .Values.ingress.className}}
+  {{- end }}
+{{- end }}
+{{- if semverCompare ">=1.19-0" .Capabilities.KubeVersion.GitVersion -}}
+apiVersion: networking.k8s.io/v1
+{{- else if semverCompare ">=1.14-0" .Capabilities.KubeVersion.GitVersion -}}
+apiVersion: networking.k8s.io/v1beta1
+{{- else -}}
+apiVersion: extensions/v1beta1
+{{- end }}
+kind: Ingress
+metadata:
+  name: {{ $fullName }}
+  labels:
+    {{- include "openim-push.labels" . | nindent 4 }}
+  {{- with .Values.ingress.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+spec:
+  {{- if and .Values.ingress.className (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion) }}
+  ingressClassName: {{ .Values.ingress.className }}
+  {{- end }}
+  {{- if .Values.ingress.tls }}
+  tls:
+    {{- range .Values.ingress.tls }}
+    - hosts:
+        {{- range .hosts }}
+        - {{ . | quote }}
+        {{- end }}
+      secretName: {{ .secretName }}
+    {{- end }}
+  {{- end }}
+  rules:
+    {{- range .Values.ingress.hosts }}
+    - host: {{ .host | quote }}
+      http:
+        paths:
+          {{- range .paths }}
+          - path: {{ .path }}
+            {{- if and .pathType (semverCompare ">=1.18-0" $.Capabilities.KubeVersion.GitVersion) }}
+            pathType: {{ .pathType }}
+            {{- end }}
+            backend:
+              {{- if semverCompare ">=1.19-0" $.Capabilities.KubeVersion.GitVersion }}
+              service:
+                name: {{ $fullName }}
+                port:
+                  number: {{ $svcPort }}
+              {{- else }}
+              serviceName: {{ $fullName }}
+              servicePort: {{ $svcPort }}
+              {{- end }}
+          {{- end }}
+    {{- end }}
+{{- end }}

deployments/charts/openim-push/templates/service.yaml

@@ -0,0 +1,15 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "openim-push.fullname" . }}
+  labels:
+    {{- include "openim-push.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    - port: {{ .Values.service.port }}
+      targetPort: http
+      protocol: TCP
+      name: http
+  selector:
+    {{- include "openim-push.selectorLabels" . | nindent 4 }}

deployments/charts/openim-push/templates/serviceaccount.yaml

@@ -0,0 +1,12 @@
+{{- if .Values.serviceAccount.create -}}
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: {{ include "openim-push.serviceAccountName" . }}
+  labels:
+    {{- include "openim-push.labels" . | nindent 4 }}
+  {{- with .Values.serviceAccount.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+{{- end }}

deployments/charts/openim-push/values.yaml

@@ -0,0 +1,82 @@
+# Default values for openim-push.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  repository: ghcr.io/openimsdk/openim-push
+  pullPolicy: IfNotPresent
+  # Overrides the image tag whose default is the chart appVersion.
+  tag: ""
+
+imagePullSecrets: []
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: false
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: ""
+
+podAnnotations: {}
+
+podSecurityContext: {}
+  # fsGroup: 2000
+
+securityContext: {}
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+ingress:
+  enabled: false
+  className: ""
+  annotations: {}
+    # kubernetes.io/ingress.class: nginx
+    # kubernetes.io/tls-acme: "true"
+  hosts:
+    - host: chart-example.local
+      paths:
+        - path: /
+          pathType: ImplementationSpecific
+  tls: []
+  #  - secretName: chart-example-tls
+  #    hosts:
+  #      - chart-example.local
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+autoscaling:
+  enabled: false
+  minReplicas: 1
+  maxReplicas: 100
+  targetCPUUtilizationPercentage: 80
+  # targetMemoryUtilizationPercentage: 80
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

deployments/charts/openim-rpc-auth/.helmignore

@@ -0,0 +1,23 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*.orig
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/

deployments/charts/openim-rpc-auth/Chart.yaml

@@ -0,0 +1,39 @@
+apiVersion: v2
+name: openim-rpc-auth
+description: A Helm chart for Kubernetes
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+# Versions are expected to follow Semantic Versioning (https://semver.org/)
+version: 0.1.0
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application. Versions are not expected to
+# follow Semantic Versioning. They should reflect the version the application is using.
+# It is recommended to use it with quotes.
+appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-rpc-auth/templates/NOTES.txt

@@ -0,0 +1,22 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range $host := .Values.ingress.hosts }}
+  {{- range .paths }}
+  http{{ if $.Values.ingress.tls }}s{{ end }}://{{ $host.host }}{{ .path }}
+  {{- end }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "openim-rpc-auth.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "openim-rpc-auth.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "openim-rpc-auth.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "openim-rpc-auth.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  export CONTAINER_PORT=$(kubectl get pod --namespace {{ .Release.Namespace }} $POD_NAME -o jsonpath="{.spec.containers[0].ports[0].containerPort}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:$CONTAINER_PORT
+{{- end }}

deployments/charts/openim-rpc-auth/templates/_helpers.tpl

@@ -0,0 +1,62 @@
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "openim-rpc-auth.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "openim-rpc-auth.fullname" -}}
+{{- if .Values.fullnameOverride }}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- $name := default .Chart.Name .Values.nameOverride }}
+{{- if contains $name .Release.Name }}
+{{- .Release.Name | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" }}
+{{- end }}
+{{- end }}
+{{- end }}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "openim-rpc-auth.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Common labels
+*/}}
+{{- define "openim-rpc-auth.labels" -}}
+helm.sh/chart: {{ include "openim-rpc-auth.chart" . }}
+{{ include "openim-rpc-auth.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end }}
+
+{{/*
+Selector labels
+*/}}
+{{- define "openim-rpc-auth.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "openim-rpc-auth.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end }}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "openim-rpc-auth.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create }}
+{{- default (include "openim-rpc-auth.fullname" .) .Values.serviceAccount.name }}
+{{- else }}
+{{- default "default" .Values.serviceAccount.name }}
+{{- end }}
+{{- end }}

deployments/charts/openim-rpc-auth/templates/deployment.yaml

@@ -0,0 +1,72 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "openim-rpc-auth.fullname" . }}
+  labels:
+    {{- include "openim-rpc-auth.labels" . | nindent 4 }}
+spec:
+  {{- if not .Values.autoscaling.enabled }}
+  replicas: {{ .Values.replicaCount }}
+  {{- end }}
+  selector:
+    matchLabels:
+      {{- include "openim-rpc-auth.selectorLabels" . | nindent 6 }}
+  template:
+    metadata:
+      {{- with .Values.podAnnotations }}
+      annotations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      labels:
+        {{- include "openim-rpc-auth.selectorLabels" . | nindent 8 }}
+    spec:
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      serviceAccountName: {{ include "openim-rpc-auth.serviceAccountName" . }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          ports:
+            - name: http
+              containerPort: 80
+              protocol: TCP
+          #livenessProbe:
+          #  httpGet:
+          #    path: /
+          #    port: http
+          #readinessProbe:
+          #  httpGet:
+          #    path: /
+          #    port: http
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+          volumeMounts:
+            - mountPath: /openim/openim-server/config/config.yaml
+              name: config
+              subPath: config.yaml
+            - mountPath: /openim/openim-server/config/
+              name: config
+              subPath: notification.yaml
+      volumes:
+        - name: config
+          configMap:
+            name: openim-cm
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

deployments/charts/openim-rpc-auth/templates/hpa.yaml

@@ -0,0 +1,28 @@
+{{- if .Values.autoscaling.enabled }}
+apiVersion: autoscaling/v2beta1
+kind: HorizontalPodAutoscaler
+metadata:
+  name: {{ include "openim-rpc-auth.fullname" . }}
+  labels:
+    {{- include "openim-rpc-auth.labels" . | nindent 4 }}
+spec:
+  scaleTargetRef:
+    apiVersion: apps/v1
+    kind: Deployment
+    name: {{ include "openim-rpc-auth.fullname" . }}
+  minReplicas: {{ .Values.autoscaling.minReplicas }}
+  maxReplicas: {{ .Values.autoscaling.maxReplicas }}
+  metrics:
+    {{- if .Values.autoscaling.targetCPUUtilizationPercentage }}
+    - type: Resource
+      resource:
+        name: cpu
+        targetAverageUtilization: {{ .Values.autoscaling.targetCPUUtilizationPercentage }}
+    {{- end }}
+    {{- if .Values.autoscaling.targetMemoryUtilizationPercentage }}
+    - type: Resource
+      resource:
+        name: memory
+        targetAverageUtilization: {{ .Values.autoscaling.targetMemoryUtilizationPercentage }}
+    {{- end }}
+{{- end }}

deployments/charts/openim-rpc-auth/templates/ingress.yaml

@@ -0,0 +1,61 @@
+{{- if .Values.ingress.enabled -}}
+{{- $fullName := include "openim-rpc-auth.fullname" . -}}
+{{- $svcPort := .Values.service.port -}}
+{{- if and .Values.ingress.className (not (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion)) }}
+  {{- if not (hasKey .Values.ingress.annotations "kubernetes.io/ingress.class") }}
+  {{- $_ := set .Values.ingress.annotations "kubernetes.io/ingress.class" .Values.ingress.className}}
+  {{- end }}
+{{- end }}
+{{- if semverCompare ">=1.19-0" .Capabilities.KubeVersion.GitVersion -}}
+apiVersion: networking.k8s.io/v1
+{{- else if semverCompare ">=1.14-0" .Capabilities.KubeVersion.GitVersion -}}
+apiVersion: networking.k8s.io/v1beta1
+{{- else -}}
+apiVersion: extensions/v1beta1
+{{- end }}
+kind: Ingress
+metadata:
+  name: {{ $fullName }}
+  labels:
+    {{- include "openim-rpc-auth.labels" . | nindent 4 }}
+  {{- with .Values.ingress.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+spec:
+  {{- if and .Values.ingress.className (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion) }}
+  ingressClassName: {{ .Values.ingress.className }}
+  {{- end }}
+  {{- if .Values.ingress.tls }}
+  tls:
+    {{- range .Values.ingress.tls }}
+    - hosts:
+        {{- range .hosts }}
+        - {{ . | quote }}
+        {{- end }}
+      secretName: {{ .secretName }}
+    {{- end }}
+  {{- end }}
+  rules:
+    {{- range .Values.ingress.hosts }}
+    - host: {{ .host | quote }}
+      http:
+        paths:
+          {{- range .paths }}
+          - path: {{ .path }}
+            {{- if and .pathType (semverCompare ">=1.18-0" $.Capabilities.KubeVersion.GitVersion) }}
+            pathType: {{ .pathType }}
+            {{- end }}
+            backend:
+              {{- if semverCompare ">=1.19-0" $.Capabilities.KubeVersion.GitVersion }}
+              service:
+                name: {{ $fullName }}
+                port:
+                  number: {{ $svcPort }}
+              {{- else }}
+              serviceName: {{ $fullName }}
+              servicePort: {{ $svcPort }}
+              {{- end }}
+          {{- end }}
+    {{- end }}
+{{- end }}

deployments/charts/openim-rpc-auth/templates/service.yaml

@@ -0,0 +1,15 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "openim-rpc-auth.fullname" . }}
+  labels:
+    {{- include "openim-rpc-auth.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    - port: {{ .Values.service.port }}
+      targetPort: http
+      protocol: TCP
+      name: http
+  selector:
+    {{- include "openim-rpc-auth.selectorLabels" . | nindent 4 }}

deployments/charts/openim-rpc-auth/templates/serviceaccount.yaml

@@ -0,0 +1,12 @@
+{{- if .Values.serviceAccount.create -}}
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: {{ include "openim-rpc-auth.serviceAccountName" . }}
+  labels:
+    {{- include "openim-rpc-auth.labels" . | nindent 4 }}
+  {{- with .Values.serviceAccount.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+{{- end }}