fix: install-im-server

Signed-off-by: Xinwei Xiong (cubxxw) <3293172751nss@gmail.com>

.docker-compose_cfg/config.yaml

@@ -1,79 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#---------------Infrastructure configuration---------------------#
-etcd:
-  etcdSchema: openim  #默认即可
-  etcdAddr: [ 127.0.0.1:2379 ] #单机部署时，默认即可
-  userName:
-  password:
-  secret: openIM123
-
-mysql:
-  dbMysqlDatabaseName: admin_chat # 数据库名字 默认即可
-
-# 默认管理员账号
-admin:
-  defaultAccount:
-    account: [ "admin1", "admin2" ]
-    defaultPassword: [ "password1", "password2" ]
-    openIMUserID: [ "openIM123456", "openIMAdmin" ]
-    faceURL: [ "", "" ]
-    nickname: [ "admin1", "admin2" ]
-    level: [ 1, 100 ]
-
-
-adminapi:
-  openImAdminApiPort: [ 10009 ] #管理后台api服务端口，默认即可，需要开放此端口或做nginx转发
-  listenIP: 0.0.0.0
-
-chatapi:
-  openImChatApiPort: [ 10008 ] #登录注册，默认即可，需要开放此端口或做nginx转发
-  listenIP: 0.0.0.0
-
-rpcport: # rpc服务端口 默认即可
-  openImAdminPort: [ 30200 ]
-  openImChatPort: [ 30300 ]
-
-
-rpcregistername: #rpc注册服务名，默认即可
-  openImChatName: Chat
-  openImAdminCMSName: Admin
-
-chat:
-  codeTTL: 300 #短信验证码有效时间(秒)
-  superVerificationCode: 666666 # 超级验证码
-  alismsverify: #阿里云短信配置，在阿里云申请成功后修改以下四项
-    accessKeyId:
-    accessKeySecret:
-    signName:
-    verificationCodeTemplateCode:
-
-
-oss:
-  tempDir: enterprise-temp # 临时密钥上传的目录
-  dataDir: enterprise-data # 最终存放目录
-  aliyun:
-    endpoint: https://oss-cn-chengdu.aliyuncs.com
-    accessKeyID: ""
-    accessKeySecret: ""
-    bucket: ""
-  tencent:
-    BucketURL: ""
-    serviceURL: https://cos.COS_REGION.myqcloud.com
-    secretID: ""
-    secretKey: ""
-    sessionToken: ""
-    bucket: ""
-  use: "minio"

.docker-compose_cfg/prometheus-compose.yml

@@ -1,85 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#more prometheus-compose.yml 
-global:
-  scrape_interval:     15s 
-  evaluation_interval: 15s 
-  external_labels:
-    monitor: 'openIM-monitor'
-
-scrape_configs:
-    - job_name: 'prometheus'
-      static_configs:
-      - targets: ['localhost:9091']
-
-    - job_name: 'openIM-server'
-      metrics_path: /metrics
-      static_configs:
-      - targets: ['localhost:10002']
-        labels:
-          group: 'api'
-
-      - targets: ['localhost:20110']
-        labels:
-          group: 'user'
-
-      - targets: ['localhost:20120']
-        labels:
-          group: 'friend'
-
-      - targets: ['localhost:20130']
-        labels:
-          group: 'message'
-
-      - targets: ['localhost:20140']
-        labels:
-          group: 'msg-gateway'    
-
-      - targets: ['localhost:20150']
-        labels:
-          group: 'group'
-
-      - targets: ['localhost:20160']
-        labels:
-          group: 'auth'
-
-      - targets: ['localhost:20170']
-        labels:
-          group: 'push'
-
-      - targets: ['localhost:20120']
-        labels:
-          group: 'friend'
-
-      
-      - targets: ['localhost:20230']
-        labels:
-          group: 'conversation' 
-
-      
-      - targets: ['localhost:21400', 'localhost:21401', 'localhost:21402', 'localhost:21403']
-        labels:
-          group: 'msg-transfer'
-       
- 
-
-
-      
-
-    - job_name: 'node'  
-      scrape_interval: 8s
-      static_configs:
-      - targets: ['localhost:9100']
-     

.dockerignore

@@ -2,6 +2,7 @@
 
 # Ignore specific files
 .dockerignore
+.git
 
 # Ignore build artifacts
 _output/
@@ -19,7 +20,6 @@ CHANGELOG/
 
 # Ignore deployment-related files
 docker-compose.yaml
-deployments/
 
 # Ignore assets
 assets/

.env

@@ -1,5 +0,0 @@
-USER=root
-PASSWORD=openIM123
-MINIO_ENDPOINT=http://127.0.0.1:10005
-API_URL=http://127.0.0.1:10002/object/
-DATA_DIR=./

.github/.codecov.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 coverage:
   status:
     project:
@@ -6,4 +20,20 @@ coverage:
         paths:
           - pkg/* # only include coverage in "pkg/" folder
         informational: true # Always pass check
-    patch: off # disable the commit only checks
+      tools: # declare a new status context "tools"
+        paths:
+          - tools/* # only include coverage in "tools/" folder
+        informational: true # Always pass check
+      test: # declare a new status context "test"
+        paths:
+          - test/* # only include coverage in "test/" folder
+        informational: true # Always pass check
+      # internal: # declare a new status context "internal"
+      #   paths:
+      #     - internal/* # only include coverage in "internal/" folder
+      #   informational: true # Always pass check
+      # cmd: # declare a new status context "cmd"
+      #   paths:
+      #     - cmd/* # only include coverage in "cmd/" folder
+      #   informational: true # Always pass check
+    patch: off # disable the commit only checks

.github/dependabot.yml

@@ -0,0 +1,59 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# To get started with Dependabot version updates, you'll need to specify which
+# package ecosystems to update and where the package manifests are located.
+# Please see the documentation for all configuration options:
+# https://docs.github.com/github/administering-a-repository/configuration-options-for-dependency-updates
+
+version: 2
+updates:
+  - package-ecosystem: "gomod"
+    directory: "/"
+    schedule:
+      interval: "daily"
+      time: "08:00"
+    labels:
+      - "dependencies"
+    commit-message:
+      prefix: "feat"
+      include: "scope"
+    groups:
+      gomod-deps:
+        patterns:
+          - "*"
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      interval: "daily"
+      time: "08:00"
+    labels:
+      - "dependencies"
+    commit-message:
+      prefix: "chore"
+      include: "scope"
+    groups:
+      github-actions:
+        patterns:
+          - "*"
+  - package-ecosystem: "docker"
+    directory: "/"
+    schedule:
+      interval: "daily"
+      time: "08:00"
+    labels:
+      - "dependencies"
+    commit-message:
+      prefix: "feat"
+      include: "scope"

.github/labels.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # Refer to Kubernetes for size/* Settings
 # https://github.com/Kubernetes/Kubernetes
 XS:

.github/release-drafter.yml

@@ -0,0 +1,51 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name-template: 'v$RESOLVED_VERSION 🌈'
+tag-template: 'v$RESOLVED_VERSION'
+categories:
+  - title: '🚀 Features'
+    labels:
+      - 'feature'
+      - 'enhancement'
+  - title: '🐛 Bug Fixes'
+    labels:
+      - 'kind/fix'
+      - 'kind/feature'
+      - 'enhancement'
+      - 'kind/documentation'
+      - 'good first issue'
+  - title: '🧰 Maintenance'
+    label: 'chore'
+change-template: '- $TITLE @$AUTHOR (#$NUMBER)'
+change-title-escapes: '\<*_&' # You can add # and @ to disable mentions, and add ` to disable code blocks.
+version-resolver:
+  major:
+    labels:
+      - 'major'
+  minor:
+    labels:
+      - 'minor'
+  patch:
+    labels:
+      - 'patch'
+  default: patch
+template: |
+  ## Changes $PREVIOUS_TAG
+
+  $CHANGES
+
+  ## Contributors to this $REPOSITORY	release
+
+  $CONTRIBUTORS	

.github/sync-release.yml

@@ -0,0 +1,30 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+OpenIMSDK/openim-docker:
+  - source: ./config
+    dest: ./openim-server/release/config
+    replace: true
+  - source: ./docs
+    dest: ./openim-server/release/docs
+    replace: true
+  - source: ./scripts
+    dest: ./openim-server/release/scripts
+    replace: true
+  - source: ./scripts
+    dest: ./scripts
+    replace: false
+  - source: ./Makefile
+    dest: ./Makefile
+    replace: false

.github/sync.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # https://github.com/BetaHuhn/repo-file-sync-action
 # Synchronization for the.github repository
 OpenIMSDK/.github:
@@ -61,14 +75,35 @@ OpenIMSDK/OpenKF:
     dest: .github/.codecov.yml
     replace: false
 
+OpenIMSDK/openim-docker:
+  - source: ./config
+    dest: ./openim-server/main/config
+    replace: true
+  - source: ./docs
+    dest: ./openim-server/main/docs
+    replace: true
+  - source: ./scripts
+    dest: ./openim-server/main/scripts
+    replace: true
+  - source: ./scripts
+    dest: ./scripts
+    replace: true
+  - source: ./Makefile
+    dest: ./Makefile
+    replace: true
+
 group:
   # first group：common to all warehouses
   # TODO: add the required warehouse here
   - repos: |
       OpenIMSDK/OpenKF@main
       OpenIMSDK/openim-miniprogram-demo@main
+      OpenIMSDK/docs
+      OpenIMSDK/chat
+      OpenIMSDK/community
+      OpenIMSDK/openim-charts
       OpenIMSDK/openim-sdk-cpp@main
-    files: 
+    files:
       - source: LICENSE
         dest: LICENSE
         replace: false
@@ -80,13 +115,22 @@ group:
         replace: false
       - source: .github/workflows/project-progress.yml
         dest: .github/workflows/project-progress.yml
-        replace: false
+        replace: false 
       - source: .github/workflows/help-comment-issue.yml
         dest: .github/workflows/help-comment-issue.yml
         replace: false
       - source: .github/.codecov.yml
         dest: .github/.codecov.yml
         replace: false
+      - source: .github/workflows/cla.yml
+        dest: .github/workflows/cla.yml
+        replace: false
+      - source: .github/workflows/auto-assign-issue.yml
+        dest: .github/workflows/auto-assign-issue.yml
+        replace: false
+      - source: .github/workflows/release.yml
+        dest: .github/workflows/release.yml
+        replace: false
       - source: ./scripts/githooks/
         dest: ./scripts/githooks/
-        replace: true
+        replace: true

.github/weekly-digest.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # https://github.com/apps/weekly-digest/installations/new
 publishDay: sun
 canPublishIssues: true

.github/workflows/auto-assign-issue.yml

@@ -0,0 +1,43 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Assign issue to comment author
+on:
+  issue_comment:
+    types: [created]
+jobs:
+  assign-issue:
+    if: |
+      contains(github.event.comment.body, '/assign') || contains(github.event.comment.body, '/accept') &&
+      !contains(github.event.comment.user.login, 'openimbot') &&
+      !contains(github.event.comment.user.login, 'kubbot')
+    runs-on: ubuntu-latest
+    permissions:
+      issues: write
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Assign the issue
+        run: |
+          export LETASE_MILESTONES=$(curl 'https://api.github.com/repos/$OWNER/$PEPO/milestones' | jq -r 'last(.[]).title')
+          gh issue edit ${{ github.event.issue.number }} --add-assignee "${{ github.event.comment.user.login }}"
+          gh issue edit ${{ github.event.issue.number }} --add-label "triage/accepted"
+          gh issue edit ${{ github.event.issue.number }} --milestone "$LETASE_MILESTONES"
+          gh issue comment $ISSUE --body "@${{ github.event.comment.user.login }} Glad to see you accepted this issue🤲, this issue has been assigned to you. I set the milestones for this issue to [$LETASE_MILESTONES](https://github.com/$OWNER/$PEPO/milestones), We are looking forward to your PR!"
+        env:
+          GH_TOKEN: ${{ secrets.REDBOT_GITHUB_TOKEN }}
+          ISSUE: ${{ github.event.issue.html_url }}
+          OWNER: ${{ github.repository_owner }}
+          REPO: ${{ github.event.repository.name }}

.github/workflows/auto-gh-pr.yml

@@ -0,0 +1,72 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Auto PR to release
+
+on:
+  pull_request:
+    # types:
+    #   - closed
+  issue_comment:
+    types: [created]
+  pull_request_review_comment:
+    types: [created]
+
+jobs:
+  sync-issue-to-pr:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v2
+      
+      - name: Sync Issue to PR
+        if: github.event_name == 'pull_request' && github.event.pull_request.base.ref == 'main'
+        run: |
+          PR_BODY="${{ github.event.pull_request.body }}"
+
+          ISSUE_NUMBER=$(echo "$PR_BODY" | grep -oP 'Fixes #\K\d+')
+          if [[ -z "$ISSUE_NUMBER" ]]; then
+            echo "No Issue number found."
+            exit 1
+          fi
+
+          echo "Issue number found: $ISSUE_NUMBER"
+
+          # Using GitHub CLI to get issue details
+          gh issue view "$ISSUE_NUMBER" --repo "${{ github.repository }}" --json labels,assignees,milestone,title > issue_data.json
+
+          # Check if jq is installed
+          if ! command -v jq &> /dev/null; then
+            echo "Installing jq..."
+            sudo apt-get install -y jq
+          fi
+
+          # Parse data with jq
+          LABELS=$(jq -r '.labels | map(.name) | join(",")' issue_data.json)
+          ASSIGNEES=$(jq -r '.assignees | map(.login) | join(",")' issue_data.json)
+          MILESTONE=$(jq -r '.milestone.title' issue_data.json)
+
+          # Check if any of the fields are empty and set them to None
+          LABELS=${LABELS:-None}
+          ASSIGNEES=${ASSIGNEES:-None}
+          MILESTONE=${MILESTONE:-None}
+
+          # Edit the PR with issue details, handling empty fields
+          gh pr edit "${{ github.event.pull_request.number }}" --repo "${{ github.repository }}" \
+            ${LABELS:+--add-label "$LABELS"} \
+            ${ASSIGNEES:+--add-assignee "$ASSIGNEES"} \
+            ${MILESTONE:+--milestone "$MILESTONE"}
+        continue-on-error: true
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/auto-invite.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: Invite users to join our group
 on:
   issue_comment:
@@ -13,19 +27,19 @@ jobs:
     steps:
 
       - name: Invite user to join our group
-        uses: peter-evans/create-or-update-comment@v1
+        uses: peter-evans/create-or-update-comment@v3
         with:
           token: ${{ secrets.BOT_GITHUB_TOKEN }}
           issue-number: ${{ github.event.issue.number }}
           body: |
             We value close connections with our users, developers, and contributors here at Open-IM-Server. With a large community and maintainer team, we're always here to help and support you. Whether you're looking to join our community or have any questions or suggestions, we welcome you to get in touch with us.
 
-            Our most recommended way to get in touch is through [Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg). Even if you're in China, Slack is usually not blocked by firewalls, making it an easy way to connect with us. Our Slack community is the ideal place to discuss and share ideas and suggestions with other users and developers of Open-IM-Server. You can ask technical questions, seek help, or share your experiences with other users of Open-IM-Server.
+            Our most recommended way to get in touch is through [Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q). Even if you're in China, Slack is usually not blocked by firewalls, making it an easy way to connect with us. Our Slack community is the ideal place to discuss and share ideas and suggestions with other users and developers of Open-IM-Server. You can ask technical questions, seek help, or share your experiences with other users of Open-IM-Server.
             
             In addition to Slack, we also offer the following ways to get in touch:
             
-            + <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg" target="_blank"><img src="https://img.shields.io/badge/Slack-OpenIM%2B-blueviolet?logo=slack&amp;logoColor=white"></a> We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) team channel.
-            + <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a> Get in touch with us on [Gmail](https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
+            + <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q" target="_blank"><img src="https://img.shields.io/badge/Slack-OpenIM%2B-blueviolet?logo=slack&amp;logoColor=white"></a> We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) team channel.
+            + <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=info@openim.io" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a> Get in touch with us on [Gmail](https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
             + <a href="https://doc.rentsoft.cn/" target="_blank"><img src="https://img.shields.io/badge/%E5%8D%9A%E5%AE%A2-%40OpenIMSDKCore-blue?style=social&logo=Octopus%20Deploy"></a> Read our [blog](https://doc.rentsoft.cn/). Our blog is a great place to stay up-to-date with Open-IM-Server projects and trends. On the blog, we share our latest developments, tech trends, and other interesting information.
             + <a href="https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg" target="_blank"><img src="https://img.shields.io/badge/%E5%BE%AE%E4%BF%A1-OpenIMSDKCore-brightgreen?logo=wechat&style=flat-square"></a> Add [Wechat](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg) and indicate that you are a user or developer of Open-IM-Server. We will process your request as soon as possible.
 

.github/workflows/auto-tag.yml

@@ -0,0 +1,52 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Create Tag
+
+on:
+  issue_comment:
+    types: [created]
+  pull_request_review_comment:
+    types: [created]
+
+jobs:
+  create_tag:
+    runs-on: ubuntu-latest
+    if: startsWith(github.event.comment.body, '/create tag')
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Validate version number and get comment
+        id: validate
+        run: |
+          COMMENT="${{ github.event.comment.body }}"
+          VERSION=$(echo $COMMENT | cut -d ' ' -f 3)
+          TAG_COMMENT=$(echo $COMMENT | cut -d '"' -f 2)
+          if [[ $VERSION =~ ^v([0-9]+\.){2}[0-9]+$ ]]; then
+            echo "version=$VERSION" >> $GITHUB_STATE
+            echo "tag_comment=$TAG_COMMENT" >> $GITHUB_STATE
+          else
+            echo "Invalid version number."
+            exit 1
+          fi
+
+      - name: Create a new tag
+        env:
+          GH_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+        run: |
+          source $GITHUB_STATE
+          git tag -a $VERSION -m "$tag_comment"
+          git push origin $VERSION
+          echo "tag_created=$VERSION" >> $GITHUB_OUTPUT

.github/workflows/bot-auto-cherry-pick.yml

@@ -0,0 +1,67 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Github Rebot for Cherry Pick when PR is merged
+on:
+  pull_request_target:
+    types:
+      - closed
+
+jobs:
+  comment:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Comment cherry-pick command
+        uses: actions/github-script@v6
+        with:
+          script: |
+            const pr = context.payload.pull_request;
+            if (!pr.merged) {
+              console.log("PR is not merged. Skipping...");
+              return;
+            }
+            if (!pr.milestone || !pr.milestone.title) {
+              console.log("Milestone is not set. Skipping...");
+              return;
+            }
+            const milestone = pr.milestone.title;
+            const ref = `heads/release-${milestone}`;
+            let branchExists;
+            try {
+              await github.rest.git.getRef({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                ref: ref
+              });
+              branchExists = true;
+            } catch (error) {
+              if (error.status === 404) {
+                console.log(`Branch ${ref} does not exist. Skipping...`);
+                branchExists = false;
+              } else {
+                throw error; // Rethrow if it's another error
+              }
+            }
+            if (!branchExists) {
+              return;
+            }
+            const cherryPickCmd = `/cherry-pick release-${milestone}`;
+            console.log(`Adding comment: ${cherryPickCmd}`);
+            await github.rest.issues.createComment({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: pr.number,
+              body: cherryPickCmd
+            });
+          github-token: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/bot-cherry-pick.yml

@@ -0,0 +1,34 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Github Rebot for Cherry Pick On Comment
+on:
+  issue_comment:
+    types: [created]
+jobs:
+  cherry-pick:
+    name: Cherry Pick
+    # && github.event.comment.user.login=='kubbot'
+    if: github.event.issue.pull_request != '' && contains(github.event.comment.body, '/cherry-pick')
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout the latest code
+        uses: actions/checkout@v4
+        with:
+          token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          fetch-depth: 0 # otherwise, you will fail to push refs to dest repo
+      - name: Automatic Cherry Pick
+        uses: vendoo/gha-cherry-pick@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/build-docker-image.yml

@@ -1,36 +1,163 @@
-name: OpenIM Build Docker Images
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Publish Docker image
+
 on:
+  schedule:
+  - cron: '30 2 * * *'
   push:
+    branches:
+      - main
+      - release-*
     tags:
       - v*
+  workflow_dispatch:
+
+env:
+  # Common versions
+  GO_VERSION: "1.20"
+
 jobs:
-  build:
+  build-dockerhub:
     runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        bin:
-          - ssserver
-          - sslocal
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
-      - name: Setup Docker Buildx
-        uses: docker/setup-buildx-action@v2
-      - name: Login to GitHub Container Registry
-        uses: docker/login-action@v2
+        uses: actions/checkout@v4
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+
+# docker.io/openim/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: openim/openim-server
+          # generate Docker tags based on the following events/attributes
+          tags: |
+            type=ref,event=tag
+            type=schedule
+            type=ref,event=branch
+            type=ref,event=pr
+            type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=semver,pattern={{major}}
+            type=sha
+
+      - name: Log in to Docker Hub
+        uses: docker/login-action@v3
+        with:
+          username: ${{ secrets.DOCKER_USERNAME }}
+          password: ${{ secrets.DOCKER_PASSWORD }}
+
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          # linux/ppc64le,linux/s390x
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}
+
+  build-aliyun:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+# registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta2
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server
+          # generate Docker tags based on the following events/attributes
+          tags: |
+            type=ref,event=tag
+            type=schedule
+            type=ref,event=branch
+            type=ref,event=pr
+            type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=semver,pattern={{major}}
+            type=sha
+
+      - name: Log in to AliYun Docker Hub
+        uses: docker/login-action@v3
+        with:
+          registry: registry.cn-hangzhou.aliyuncs.com
+          username: ${{ secrets.ALIREGISTRY_USERNAME }}
+          password: ${{ secrets.ALIREGISTRY_TOKEN }}
+      
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          # linux/ppc64le,linux/s390x
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta2.outputs.tags }}
+          labels: ${{ steps.meta2.outputs.labels }}
+
+  build-ghcr:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+# ghcr.io/openimsdk/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta3
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: ghcr.io/openimsdk/openim-server
+          # generate Docker tags based on the following events/attributes
+          tags: |
+            type=ref,event=tag
+            type=schedule
+            type=ref,event=branch
+            type=ref,event=pr
+            type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=semver,pattern={{major}}
+            type=sha
+
+      - name: Log in to GitHub Container Registry
+        uses: docker/login-action@v3
         with:
           registry: ghcr.io
           username: ${{ github.repository_owner }}
           password: ${{ secrets.GITHUB_TOKEN }}
-      - name: Docker metadata
-        id: metadata
-        uses: docker/metadata-action@v4
+
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v5
         with:
-          images: ghcr.io/${{ github.repository_owner }}/openim-${{ matrix.bin }}
-      - name: Build and release Docker images
-        uses: docker/build-push-action@v3
-        with:
-          platforms: linux/386,linux/amd64,linux/arm64/v8
-          target: ${{ matrix.bin }}
-          tags: ${{ steps.metadata.outputs.tags }}
-          push: true
+          context: .
+          # linux/ppc64le,linux/s390x
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta3.outputs.tags }}
+          labels: ${{ steps.meta3.outputs.labels }}

.github/workflows/check-coverage.yml

@@ -1,45 +1,59 @@
-# name: Check-Coverage
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
-# on:
-#   workflow_dispatch:
-#   push:
-#     branches: [ "main" ]
-#     paths-ignore:
-#       - "docs/**"
-#       - "**/*.md"
-#       - "**/*.yaml"
-#       - "CONTRIBUTORS"
-#       - "CHANGELOG/**"
-#   pull_request:
-#     branches: [ "*" ]
-#     paths-ignore:
-#       - "docs/**"
-#       - "**/*.md"
-#       - "**/*.yaml"
-#       - "CONTRIBUTORS"
-#       - "CHANGELOG/**"
-# env:
-#   # Common versions
-#   GO_VERSION: "1.20"
+name: OpenIM Check Coverage
 
-# jobs:
-#   coverage:
-#     runs-on: ubuntu-20.04
-#     steps:
-#       - name: Checkout
-#         uses: actions/checkout@v3
+on:
+  workflow_dispatch:
+  push:
+    branches: [ "main" ]
+    paths-ignore:
+      - "docs/**"
+      - "**/*.md"
+      - "**/*.yaml"
+      - "CONTRIBUTORS"
+      - "CHANGELOG/**"
+  pull_request:
+    branches: [ "*" ]
+    paths-ignore:
+      - "docs/**"
+      - "**/*.md"
+      - "**/*.yaml"
+      - "CONTRIBUTORS"
+      - "CHANGELOG/**"
+env:
+  # Common versions
+  GO_VERSION: "1.20"
 
-#       - name: Setup Golang with cache
-#         uses: magnetikonline/action-golang-cache@v3
-#         with:
-#           go-version: ${{ env.GO_VERSION }}
-#           token: ${{ secrets.BOT_GITHUB_TOKEN }}
+jobs:
+  coverage:
+    runs-on: ubuntu-20.04
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
 
-#       - name: Install Dependencies
-#         run: sudo apt update && sudo apt install -y libgpgme-dev libbtrfs-dev libdevmapper-dev
+      - name: Setup Golang with cache
+        uses: magnetikonline/action-golang-cache@v4
+        with:
+          go-version: ${{ env.GO_VERSION }}
 
-#       - name: Run Cover
-#         run: make cover
+      - name: Install Dependencies
+        run: sudo apt update && sudo apt install -y libgpgme-dev libbtrfs-dev libdevmapper-dev
 
-#       - name: Upload Coverage to Codecov
-#         uses: codecov/codecov-action@v3
+      - name: Run Cover
+        run: make cover
+        continue-on-error: true
+
+      - name: Upload Coverage to Codecov
+        uses: codecov/codecov-action@v3

.github/workflows/cla.yml

@@ -0,0 +1,62 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM CLA Assistant
+on:
+  issue_comment:
+    types: [created]
+  pull_request_target:
+    types: [opened,closed,synchronize]
+
+# explicitly configure permissions, in case your GITHUB_TOKEN workflow permissions are set to read-only in repository settings
+permissions:
+  actions: write
+  contents: write
+  pull-requests: write
+  statuses: write
+
+env:
+  # Define Open-IM-Server variables here
+  OPEN_IM_SERVER_REMOTE_ORGANIZATION: openim-sigs
+  REMOTE_REPOSITORY: cla
+  OPEN_IM_SERVER_CLA_DOCUMENT: https://github.com/openim-sigs/cla/blob/main/README.md
+  OPEN_IM_SERVER_SIGNATURES_PATH: signatures/${{ github.event.repository.name }}/cla.json
+
+  OPEN_IM_SERVER_ALLOWLIST: kubbot,bot*,bot-*,bot/*,bot-/*,bot,*[bot]
+
+jobs:
+  CLAAssistant:
+    runs-on: ubuntu-latest
+    steps:
+      - name: "CLA Assistant"
+        if: (github.event.comment.body == 'recheck' || github.event.comment.body == 'I have read the CLA Document and I hereby sign the CLA') || github.event_name == 'pull_request_target'
+        uses: contributor-assistant/github-action@v2.3.1
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+          PERSONAL_ACCESS_TOKEN: ${{ secrets.REDBOT_GITHUB_TOKEN }}
+        with:
+          path-to-signatures: ${{ env.OPEN_IM_SERVER_SIGNATURES_PATH }}
+          path-to-document: ${{ env.OPEN_IM_SERVER_CLA_DOCUMENT }}
+          branch: 'main'
+          allowlist: ${{ env.OPEN_IM_SERVER_ALLOWLIST }}
+
+          remote-organization-name: ${{ env.OPEN_IM_SERVER_REMOTE_ORGANIZATION }}
+          remote-repository-name: ${{ env.REMOTE_REPOSITORY }}
+
+          create-file-commit-message: '📚 Docs: Creating file for storing ${{ github.event.repository.name }} CLA Signatures'
+          custom-notsigned-prcomment: '💕 Thank you for your contribution and please kindly read and sign our [🎯https://github.com/openim-sigs/cla/blob/main/README.md](https://github.com/openim-sigs/cla/blob/main/README.md). <br> If you wish to sign the CRA, **Please copy and comment on the following sentence:**'
+          custom-pr-sign-comment: 'I have read the CLA Document and I hereby sign the CLA'
+          custom-allsigned-prcomment: '🤖 All Contributors have signed the [${{ github.event.repository.name }} CLA](https://github.com/openim-sigs/cla/blob/main/README.md).<br> The signed information is recorded [🤖here](https://github.com/openim-sigs/cla/tree/main/signatures/${{ github.event.repository.name }}/cla.json)'
+        #   lock-pullrequest-aftermerge: false - if you don't want this bot to automatically lock the pull request after merging (default - true)
+        #   use-dco-flag: true - If you are using DCO instead of CLA

.github/workflows/codeql-analysis.yml

@@ -13,7 +13,7 @@
 # limitations under the License.
 
 
-name: "Code Scanning - Action"
+name: "OpenIM Code Scanning - Action"
 
 on:
   push:
@@ -42,19 +42,19 @@ jobs:
       security-events: write
 
       # only required for workflows in private repositories
-      actions: read
-      contents: read
+      actions: write
+      contents: write
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       # Initializes the CodeQL tools for scanning.
       - name: Initialize CodeQL
         uses: github/codeql-action/init@v2
         # Override language selection by uncommenting this and choosing your languages
-        # with:
-        #   languages: go, javascript, csharp, python, cpp, java, ruby
+        with:
+          languages: go
 
       # Autobuild attempts to build any compiled languages (C/C++, C#, Go, or Java).
       # If this step fails, then you should remove it and run the build manually (see below).
@@ -68,9 +68,9 @@ jobs:
       #    three lines and modify them (or add more) to build your code if your
       #    project uses a compiled language
 
-      #- run: |
-      #     make bootstrap
-      #     make release
+    #   - run: |
+    #       make bootstrap
+    #       make release
 
       - name: Perform CodeQL Analysis
         uses: github/codeql-action/analyze@v2

.github/workflows/create-branch-on-tag.yml

@@ -0,0 +1,77 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Create Branch on Tag
+
+on:
+  push:
+    tags:
+      - 'v*.*.0'
+
+permissions:
+  contents: write
+  actions: write
+
+jobs:
+  create-branch:
+    runs-on: ubuntu-latest
+    steps:
+    - name: Check out code
+      uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
+
+    - name: Set up Git
+      run: |
+        git config --global user.name 'kubbot'
+        git config --global user.email '3293172751yxy@gmail.com'
+
+    - name: Install git-chglog
+      run: make install.git-chglog
+
+    - name: Create Branch and Push
+      env:
+        TAG_NAME: ${{ github.ref_name }}
+      run: |
+        IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
+        if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
+          BRANCH_NAME="release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}"
+          echo "Creating branch $BRANCH_NAME"
+          git checkout -b "$BRANCH_NAME"
+          git push origin "$BRANCH_NAME"
+        else
+          echo "Not a release tag. Skipping branch creation."
+        fi
+      continue-on-error: true
+
+    - name: Create and Commit CHANGELOG
+      if: endsWith(github.ref_name, '.0')
+      run: |
+        git fetch --all
+        TAG_NAME=${GITHUB_REF#refs/tags/}
+        IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
+        git checkout main
+        cd CHANGELOG
+        git-chglog --tag-filter-pattern "v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.*" -o "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+        git add "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+        git commit -m "Update CHANGELOG for $TAG_NAME" || echo "No changes to commit."
+      continue-on-error: true
+
+    - name: Push CHANGELOG to Main
+      if: steps.create-and-commit-changelog.outputs.changes == 'true'
+      uses: ad-m/github-push-action@v0.6.0
+      with:
+        github_token: ${{ secrets.BOT_GITHUB_TOKEN }}
+        branch: main
+    continue-on-error: true

.github/workflows/depsreview.yaml

@@ -0,0 +1,18 @@
+# Copyright © 2023 KubeCub open source community. All rights reserved.
+# Licensed under the MIT License (the "License");
+# you may not use this file except in compliance with the License.
+
+name: OpenIM Dependency Review
+on: [pull_request]
+
+permissions:
+  contents: read
+
+jobs:
+  dependency-review:
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Checkout Repository'
+        uses: actions/checkout@v4
+      - name: 'Dependency Review'
+        uses: actions/dependency-review-action@v3

.github/workflows/docker-buildx.yml

@@ -0,0 +1,372 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Docker Buildx Images CI
+
+on:
+  schedule:
+  - cron: '30 1 * * *'
+  push:
+    branches:
+      - release-*
+    tags:
+      - v*
+  workflow_dispatch:
+
+jobs:
+  build-ghcr:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+        
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
+        
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+        with:
+          install: true
+
+      - name: Cache Docker layers
+        uses: actions/cache@v3
+        with:
+          path: /tmp/.buildx-cache
+          key: ${{ runner.os }}-buildx-${{ github.sha }}
+          restore-keys: |
+            ${{ runner.os }}-buildx-
+
+      - name: Log in to GitHub Container Registry
+        uses: docker/login-action@v3
+        with:
+          registry: ghcr.io
+          username: ${{ github.repository_owner }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Log in to Docker Hub
+        uses: docker/login-action@v3
+        with:
+          username: ${{ secrets.DOCKER_USERNAME }}
+          password: ${{ secrets.DOCKER_PASSWORD }}
+
+      - name: Log in to AliYun Docker Hub
+        uses: docker/login-action@v3
+        with:
+          registry: registry.cn-hangzhou.aliyuncs.com
+          username: ${{ secrets.ALIREGISTRY_USERNAME }}
+          password: ${{ secrets.ALIREGISTRY_TOKEN }}
+
+################################################
+# build/
+# └── docker
+#     ├── openim-api
+#     │   └── Dockerfile
+#     ├── openim-cmdutils
+#     │   └── Dockerfile
+#     ├── openim-crontask
+#     │   └── Dockerfile
+#     ├── openim-msggateway
+#     │   └── Dockerfile
+#     ├── openim-msgtransfer
+#     │   └── Dockerfile
+#     ├── openim-push
+#     │   └── Dockerfile
+#     ├── openim-rpc-auth
+#     │   └── Dockerfile
+#     ├── openim-rpc-conversation
+#     │   └── Dockerfile
+#     ├── openim-rpc-friend
+#     │   └── Dockerfile
+#     ├── openim-rpc-group
+#     │   └── Dockerfile
+#     ├── openim-rpc-msg
+#     │   └── Dockerfile
+#     ├── openim-rpc-third
+#     │   └── Dockerfile
+#     └── openim-rpc-user
+#         └── Dockerfile
+#############################################
+
+      - name: Extract metadata (tags, labels) for Docker openim-api
+        id: meta1
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-api
+            openim/openim-api
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-api
+
+      - name: Build and push Docker image for openim-api
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-api/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta1.outputs.tags }}
+          labels: ${{ steps.meta1.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-cmdutils
+        id: meta2
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-cmdutils
+            openim/openim-cmdutils
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-cmdutils
+
+      - name: Build and push Docker image for openim-cmdutils
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-cmdutils/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta2.outputs.tags }}
+          labels: ${{ steps.meta2.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-crontask
+        id: meta3
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-crontask
+            openim/openim-crontask
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-crontask
+
+      - name: Build and push Docker image for openim-crontask
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-crontask/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta3.outputs.tags }}
+          labels: ${{ steps.meta3.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-msggateway
+        id: meta4
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-msggateway
+            openim/openim-msggateway
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-msggateway
+
+      - name: Build and push Docker image for openim-msggateway
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-msggateway/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta4.outputs.tags }}
+          labels: ${{ steps.meta4.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-msgtransfer
+        id: meta5
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-msgtransfer
+            openim/openim-msgtransfer
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-msgtransfer
+
+      - name: Build and push Docker image for openim-msgtransfer
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-msgtransfer/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta5.outputs.tags }}
+          labels: ${{ steps.meta5.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+          
+      - name: Extract metadata (tags, labels) for Docker openim-push
+        id: meta6
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-push
+            openim/openim-push
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-push
+
+      - name: Build and push Docker image for openim-push
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-push/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta6.outputs.tags }}
+          labels: ${{ steps.meta6.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-auth
+        id: meta7
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-rpc-auth
+            openim/openim-rpc-auth
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-auth
+
+      - name: Build and push Docker image for openim-rpc-auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-rpc-auth/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta7.outputs.tags }}
+          labels: ${{ steps.meta7.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-conversation
+        id: meta8
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-rpc-conversation
+            openim/openim-rpc-conversation
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-conversation
+
+      - name: Build and push Docker image for openim-rpc-conversation
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-rpc-conversation/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta8.outputs.tags }}
+          labels: ${{ steps.meta8.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-friend
+        id: meta9
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-rpc-friend
+            openim/openim-rpc-friend
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-friend
+
+      - name: Build and push Docker image for openim-rpc-friend
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-rpc-friend/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta9.outputs.tags }}
+          labels: ${{ steps.meta9.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-group
+        id: meta10
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-rpc-group
+            openim/openim-rpc-group
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-group
+
+      - name: Build and push Docker image for openim-rpc-group
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-rpc-group/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta10.outputs.tags }}
+          labels: ${{ steps.meta10.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-msg
+        id: meta11
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-rpc-msg
+            openim/openim-rpc-msg
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-msg
+
+      - name: Build and push Docker image for openim-rpc-msg
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-rpc-msg/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta11.outputs.tags }}
+          labels: ${{ steps.meta11.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-third
+        id: meta12
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-rpc-third
+            openim/openim-rpc-third
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-third
+
+      - name: Build and push Docker image for openim-rpc-third
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-rpc-third/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta12.outputs.tags }}
+          labels: ${{ steps.meta12.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-user
+        id: meta13
+        uses: docker/metadata-action@v5.0.0
+        with:
+          images: |
+            ghcr.io/openimsdk/openim-rpc-user
+            openim/openim-rpc-user
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-user
+
+      - name: Build and push Docker image for openim-rpc-user
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./build/images/openim-rpc-user/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta13.outputs.tags }}
+          labels: ${{ steps.meta13.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache

.github/workflows/e2e-test.yml

@@ -0,0 +1,114 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Linux System E2E Test
+
+on:
+  workflow_dispatch:
+  pull_request:
+  push:
+  schedule:
+    # run e2e test every 4 hours
+    - cron: 0 */4 * * *
+
+env:
+  CALLBACK_ENABLE: true
+
+jobs:
+  build:
+    name: Test
+    runs-on: ubuntu-latest
+    env:
+      GO111MODULE: on
+    steps:
+
+      - name: Set up Go 1.21
+        uses: actions/setup-go@v4
+        with:
+          go-version: 1.21
+        id: go
+
+      - name: Check out code into the Go module directory
+        uses: actions/checkout@v4
+
+      - name: Create e2e test
+        run: |
+          echo "...test e2e"
+
+  execute-linux-systemd-scripts:
+    name: Execute OpenIM script on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    environment:
+      name: openim
+    strategy:
+      matrix:
+        go_version: ["1.20"]
+        os: ["ubuntu-latest"]
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v4
+
+    - name: Set up Go ${{ matrix.go_version }}
+      uses: actions/setup-go@v4
+      with:
+        go-version: ${{ matrix.go_version }}
+      id: go
+
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
+    - name: Docker Operations
+      run: |
+        sudo make init
+        sudo docker compose up -d
+        sudo sleep 20
+
+    - name: Module Operations
+      run: |
+        sudo make tidy
+        sudo make tools.verify.go-gitlint
+
+    - name: Build, Start
+      run: |
+        sudo ./scripts/install/install.sh -i
+
+    - name: Exec OpenIM System Status Chack
+      run: |
+        sudo ./scripts/install/install.sh -s
+
+    - name: Exec OpenIM API test
+      run: |
+        sudo make test-api
+    
+    - name: Exec OpenIM E2E test
+      run: |
+        sudo make test-e2e
+
+    - name: Exec OpenIM System uninstall
+      run: |
+        sudo ./scripts/install/install.sh -u
+
+    - name: gobenchdata publish
+      uses: bobheadxi/gobenchdata@v1
+      with:
+        PRUNE_COUNT: 30
+        GO_TEST_FLAGS: -cpu 1,2
+        PUBLISH: true
+        PUBLISH_BRANCH: gh-pages
+      env:
+        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+      continue-on-error: true

.github/workflows/golangci-lint.yml

@@ -13,39 +13,38 @@
 # limitations under the License.
 
 
-name: OpenKF golangci-lint
+name: OpenIM golangci-lint
 on:
   push:
     branches: [main]
-#   pull_request:
-#     branches: [main]
+  pull_request:
 jobs:
     golangci:
       name: lint
       runs-on: ubuntu-latest
       steps:
-        - uses: actions/checkout@v3
+        - uses: actions/checkout@v4
         - uses: actions/setup-go@v4
           with:
-            go-version: '1.20'
+            go-version: '1.21'
             cache: false
         - name: golangci-lint
-          uses: golangci/golangci-lint-action@v3
+          uses: golangci/golangci-lint-action@v3.7.0
           with:
             # Require: version of golangci-lint to use in form of v1.2 or v1.2.3 or `latest` to use the latest version
-            version: v1.53
+            version: v1.54
 
             # Optional: working directory, useful for monorepos
-            working-directory: server
+            # working-directory: server
 
             # Optional: golangci-lint command line arguments.
             # 
             # Note: by default the `.golangci.yml` file should be at the root of the repository.
             # The location of the configuration file can be changed by using `--config=`
-            # args: --timeout=30m --config=/my/path/.golangci.yml --issues-exit-code=0
+            # args: --timeout=30m --config=/scripts/.golangci.yml --issues-exit-code=0
 
             # Optional: show only new issues if it's a pull request. The default value is `false`.
-            # only-new-issues: true
+            only-new-issues: true
 
             # Optional:The mode to install golangci-lint. It can be 'binary' or 'goinstall'.
-            install-mode: "goinstall"
+            # install-mode: "goinstall"

.github/workflows/gosec.yml

@@ -1,30 +1,45 @@
-# name: Run gosec
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
-# # gosec is a source code security audit tool for the Go language. It performs a static 
-# # analysis of the Go code, looking for potential security problems. The main functions of gosec are:
-# #     1. Find common security vulnerabilities, such as SQL injection, command injection, and cross-site scripting (XSS).
-# #     2. Audit codes according to common security standards and find non-standard codes.
-# #     3. Assist the Go language engineer to write safe and reliable code.
+name: OpenIM Run Gosec
 
-# on:
-#   push:
-#     branches: "*"
-#   pull_request:
-#     branches: "*"
-#     paths-ignore:
-#       - '*.md'
-#       - '*.yml'
-#       - '.github'
+# gosec is a source code security audit tool for the Go language. It performs a static 
+# analysis of the Go code, looking for potential security problems. The main functions of gosec are:
+#     1. Find common security vulnerabilities, such as SQL injection, command injection, and cross-site scripting (XSS).
+#     2. Audit codes according to common security standards and find non-standard codes.
+#     3. Assist the Go language engineer to write safe and reliable code.
+# https://github.com/securego/gosec/
+on:
+  push:
+    branches: "*"
+  pull_request:
+    branches: "*"
+    paths-ignore:
+      - '*.md'
+      - '*.yml'
+      - '.github'
 
-# jobs:
-#   golang-security-action:
-#     runs-on: ubuntu-latest
-#     env:
-#       GO111MODULE: on
-#     steps:
-#       - name: Check out code
-#         uses: actions/checkout@v3
-#       - name: Run Gosec Security Scanner
-#         uses: securego/gosec@master
-#         with:
-#           args: ./...
+jobs:
+  golang-security-action:
+    runs-on: ubuntu-latest
+    env:
+      GO111MODULE: on
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+      - name: Run Gosec Security Scanner
+        uses: securego/gosec@master
+        with:
+          args: ./...
+        continue-on-error: true

.github/workflows/greetings.yml

@@ -0,0 +1,49 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM First Interaction
+
+on:
+  issues:
+    types: [opened]
+  pull_request:
+    branches: [main]
+    types: [opened]
+
+jobs:
+  check_for_first_interaction:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/first-interaction@v1.2.0
+        with:
+          repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          pr-message: |
+            Hello! Thank you for your contribution.
+            
+            If you are fixing a bug, please reference the issue number in the description.
+
+            If you are implementing a feature request, please check with the maintainers that the feature will be accepted first.
+
+            [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) to connect and communicate with our developers.
+
+            Please leave your information in the [✨ discussions](https://github.com/orgs/OpenIMSDK/discussions/426), we expect anyone to join OpenIM developer community.
+
+          issue-message: |
+            Hello! Thank you for filing an issue.
+
+            If this is a bug report, please include relevant logs to help us debug the problem.
+            
+            [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) to connect and communicate with our developers.
+        continue-on-error: true

.github/workflows/help-comment-issue.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: Good frist issue add comment
 on:
   issues:
@@ -17,5 +31,5 @@ jobs:
           token: ${{ secrets.BOT_GITHUB_TOKEN }}
           body: |
             This issue is available for anyone to work on. **Make sure to reference this issue in your pull request.** :sparkles: Thank you for your contribution! :sparkles:
-            [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) to connect and communicate with our developers.
+            [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) to connect and communicate with our developers.
             If you wish to accept this assignment, please leave a comment in the comments section: `/accept`.🎯

.github/workflows/image.yml

@@ -1,81 +0,0 @@
-name: Build Image
-
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - "**.go"
-      - "!**_test.go"
-      - "build/**"
-    tags:
-      - v*
-
-jobs:
-  release:
-    strategy:
-      matrix:
-        components: [core, swagger]
-    runs-on: ubuntu-20.04
-    steps:
-      - uses: actions/checkout@v3
-        with:
-          fetch-depth: 20
-      - uses: dorny/paths-filter@v2
-        if: ${{ !startsWith(github.ref_name, 'v') }}
-        id: changes
-        with:
-          filters: |
-            go:
-              - '**.go'
-              - 'build/core/Dockerfile'
-            api:
-              - 'openapi/**'
-              - 'build/swagger/build.sh'
-              - 'build/swagger/Dockerfile'
-      - name: Docker meta
-        id: meta
-        uses: docker/metadata-action@v4
-        with:
-          flavor: |
-            latest=false
-          images: |
-            ${{ secrets.DOCKERHUB_USERNAME }}/openimsdk-${{ matrix.components }}
-            registry.cn-hangzhou.aliyuncs.com/${{ secrets.ALIREGISTRY_NAMESPACE }}/openimsdk-${{ matrix.components }}
-          tags: |
-            type=ref,event=branch
-            type=sha,prefix={{branch}}-,enable=${{ github.ref_type == 'branch' }}
-            type=ref,event=tag
-      - name: Login to Docker Hub
-        uses: docker/login-action@v2
-        with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Login to Ali Container Registry
-        uses: docker/login-action@v2
-        with:
-          registry: registry.cn-hangzhou.aliyuncs.com
-          username: ${{ secrets.ALIREGISTRY_USERNAME }}
-          password: ${{ secrets.ALIREGISTRY_TOKEN }}
-
-      - name: Condition
-        id: condition
-        run: |
-          echo "run=${{ startsWith(github.ref_name, 'v') || ((steps.changes.outputs.go == 'true' && (matrix.components == 'core' || matrix.components == 'job')) || (steps.changes.outputs.api == 'true' && matrix.components == 'swagger')) }}" >> $GITHUB_OUTPUT
-
-      - name: Set up QEMU
-        if: ${{ steps.condition.outputs.run == 'true' }}
-        uses: docker/setup-qemu-action@v2
-      - name: Set up Docker Buildx
-        if: ${{ steps.condition.outputs.run == 'true' }}
-        uses: docker/setup-buildx-action@v2
-      - name: Build and push
-        if: ${{ steps.condition.outputs.run == 'true' }}
-        uses: docker/build-push-action@v3
-        with:
-          context: .
-          file: ./build/${{ matrix.components }}/Dockerfile
-          platforms: linux/amd64
-          push: true
-          tags: ${{ steps.meta.outputs.tags }}

.github/workflows/issue-robot.yml

@@ -1,4 +1,18 @@
-name: 'issue translator'
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Issue Aotu Translator
 on:
   issue_comment:
     types: [created]

.github/workflows/link-pr.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: Github Rebot for Link check error
 
 # Every Monday at 12:30 p.m
@@ -9,11 +23,11 @@ jobs:
   linkChecker:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
 
       - name: Link Checker
         id: lychee
-        uses: lycheeverse/lychee-action@v1.7.0
+        uses: lycheeverse/lychee-action@v1.8.0
         with:
             # For parameter description, see https://github.com/lycheeverse/lychee#commandline-parameters
             # Actions Link address -> https://github.com/lycheeverse/lychee-action
@@ -27,7 +41,7 @@ jobs:
             # ./*.md all markdown files in the root directory
           args: --verbose  -E -i --no-progress --exclude-path './CHANGELOG' './**/*.md'
         env:
-          GITHUB_TOKEN: ${{secrets.GH_PAT}}
+          GITHUB_TOKEN: ${{secrets.BOT_GITHUB_TOKEN}}
 
       - name: Create Issue From File
         if: env.lychee_exit_code != 0

.github/workflows/lock-issue.yml

@@ -0,0 +1,65 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: 'Lock Threads'
+
+on:
+  schedule:
+    - cron: '0 * * * *'
+  workflow_dispatch:
+
+permissions:
+  issues: write
+  pull-requests: write
+
+concurrency:
+  group: lock
+
+jobs:
+  action:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: dessant/lock-threads@v4
+        with:
+          github-token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          issue-inactive-days: '365'
+          exclude-issue-created-before: ''
+          exclude-issue-created-after: ''
+          exclude-issue-created-between: ''
+          exclude-issue-closed-before: ''
+          exclude-issue-closed-after: ''
+          exclude-issue-closed-between: ''
+          include-any-issue-labels: ''
+          include-all-issue-labels: ''
+          exclude-any-issue-labels: ''
+          add-issue-labels: ''
+          remove-issue-labels: ''
+          issue-comment: ''
+          issue-lock-reason: 'resolved'
+          pr-inactive-days: '365'
+          exclude-pr-created-before: ''
+          exclude-pr-created-after: ''
+          exclude-pr-created-between: ''
+          exclude-pr-closed-before: ''
+          exclude-pr-closed-after: ''
+          exclude-pr-closed-between: ''
+          include-any-pr-labels: ''
+          include-all-pr-labels: ''
+          exclude-any-pr-labels: ''
+          add-pr-labels: ''
+          remove-pr-labels: ''
+          pr-comment: ''
+          pr-lock-reason: 'resolved'
+          process-only: ''
+          log-output: false

.github/workflows/milestone.yml

@@ -0,0 +1,72 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# shamelessly copied from https://github.com/sigstore/cosign/blob/main/.github/workflows/milestone.yaml
+
+name: milestone
+
+on:
+  pull_request_target:
+    types: [closed]
+    branches:
+      - main
+
+jobs:
+  milestone:
+    runs-on: ubuntu-latest
+
+    permissions:
+      actions: none
+      checks: none
+      contents: read
+      deployments: none
+      issues: write
+      packages: none
+      pull-requests: write
+      repository-projects: none
+      security-events: none
+      statuses: none
+
+    steps:
+      - uses: actions/github-script@v6 # v6
+        with:
+          script: |
+            if (!context.payload.pull_request.merged) {
+              console.log('PR was not merged, skipping.');
+              return;
+            }
+
+            if (!!context.payload.pull_request.milestone) {
+              console.log('PR has existing milestone, skipping.');
+              return;
+            }
+
+            milestones = await github.rest.issues.listMilestones({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              state: 'open',
+              sort: 'due_on',
+              direction: 'asc'
+            })
+            if (milestones.data.length === 0) {
+              console.log('There are no milestones, skipping.');
+              return;
+            }
+
+            await github.rest.issues.update({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.payload.pull_request.number,
+              milestone: milestones.data[0].number
+            });

.github/workflows/opencommit.yml

@@ -1,9 +1,24 @@
-name: 'OpenCommit Action'
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM OpenCommit Action
 
 on:
   push:
-    branches:
-      - main
+    # this list of branches is often enough,
+    # but you may still ignore other public branches
+    branches-ignore: [main master dev development release]
 
 jobs:
   opencommit:
@@ -21,12 +36,12 @@ jobs:
           fetch-depth: 0
       - uses: di-sukharev/opencommit@github-action-v1.0.4
         with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
 
         env:
           # set openAI api key in repo actions secrets,
           # for openAI keys go to: https://platform.openai.com/account/api-keys
-          # for repo secret go to: https://github.com/kuebcub/settings/secrets/actions
+          # for repo secret go to: <your_repo_url>/settings/secrets/actions
           OCO_OPENAI_API_KEY: ${{ secrets.OPENAI_API_KEY }}
 
           # customization
@@ -34,5 +49,7 @@ jobs:
           OCO_OPENAI_BASE_PATH: ''
           OCO_DESCRIPTION: false
           OCO_EMOJI: false
-          OCO_MODEL: gpt-3.5-turbo
-          OCO_LANGUAGE: en
+          OCO_MODEL: gpt-3.5-turbo-16k
+          OCO_LANGUAGE: en
+          OCO_PROMPT_MODULE: conventional-commit
+        continue-on-error: true

.github/workflows/openim-ci.yml

@@ -1,134 +0,0 @@
-# Copyright © 2023 OpenIM open source community. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: OpenIM CI
-
-on: 
-  push:
-    branches:
-        - main
-    paths-ignore:
-        - "docs/**"
-        - "README.md"
-        - "README_zh-CN.md"
-        - "CONTRIBUTING.md"
-  pull_request:
-    branches:
-        - main
-    paths-ignore:
-        - "README.md"
-        - "README_zh-CN.md"
-        - "CONTRIBUTING.md"
-        - "docs/**"
-
-env:
-  GO_VERSION: "1.19"
-  GOLANGCI_VERSION: "v1.50.1"
-
-jobs:
-  openim:
-    name: Test with go ${{ matrix.go_version }} on ${{ matrix.os }}
-    runs-on: ${{ matrix.os }}
-    environment:
-      name: openim
-
-    strategy:
-      matrix:
-        go_version: ["1.18","1.19","1.20"]
-        os: [ubuntu-latest]
-
-    steps:
-      - name: Set up Go ${{ matrix.go_version }}
-        uses: actions/setup-go@v2
-        with:
-          go-version: ${{ matrix.go_version }}
-        id: go
-
-      - name: Check out code into the Go module directory
-        uses: actions/checkout@v2
-
-      - name: Run go modules tidy
-        run: |
-          make tidy
-
-      - name: Run go format
-        run: |
-          make format
-          echo "Run go format successfully"
-        continue-on-error: true
-
-    #   - name: Generate all necessary files, such as error code files
-    #     run: |
-    #       make generate
-
-    #   - name: Check syntax and styling of go sources
-    #     run: |
-    #       set -e
-    #       make lint
-
-    #   - name: Run unit test and get test coverage
-    #     run: |
-    #       make cover
-
-      - name: Build source code for host platform
-        run: |
-          make build
-          echo "Build source code for host platform successfully"
-
-    #   - name: Collect Test Coverage File
-    #     uses: actions/upload-artifact@v1.0.0
-    #     with:
-    #       name: main-output
-    #       path: _output/tmp/coverage.out
-
-    #   - name: Set up Docker Buildx
-    #     uses: docker/setup-buildx-action@v1
-
-#   lint:
-#       runs-on: ubuntu-20.04
-#       steps:
-#         - name: Checkout
-#           uses: actions/checkout@v3
-#           with:
-#             fetch-depth: 0
-  
-#         - name: Set up Go
-#           uses: actions/setup-go@v3
-#           with:
-#             go-version: ${{ env.GO_VERSION }}
-  
-#         - name: golangci-lint
-#           uses: golangci/golangci-lint-action@v3
-#           with:
-#             version: ${{ env.GOLANGCI_VERSION }}
-
-#   docker-image-tests:
-#     runs-on: ubuntu-20.04
-#     steps:
-#       - name: Checkout
-#         uses: actions/checkout@v3
-#         with:
-#           fetch-depth: 0
-      
-#       - name: Set up Go
-#         uses: actions/setup-go@v3
-#         with:
-#           go-version: ${{ env.GO_VERSION }}
-
-#       - name: Run tests
-#         run: make build
-      
-#       - name: Test docker image
-#         run: |
-#           docker build -t openim:ci-build .

.github/workflows/openimci.yml

@@ -0,0 +1,247 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM CI Aotu Build and Install
+
+on: 
+  push:
+    branches:
+        - main
+    paths-ignore:
+        - "docs/**"
+        - "README.md"
+        - "README_zh-CN.md"
+        - "CONTRIBUTING.md"
+  pull_request:
+    branches:
+        - main
+    paths-ignore:
+        - "README.md"
+        - "README_zh-CN.md"
+        - "CONTRIBUTING.md"
+        - "docs/**"
+
+env:
+  GO_VERSION: "1.19"
+  GOLANGCI_VERSION: "v1.50.1"
+
+
+jobs:
+  openim:
+    name: Test with go ${{ matrix.go_version }} on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    permissions:
+        contents: write
+    environment:
+      name: openim
+
+    strategy:
+      matrix:
+        go_version: ["1.19","1.20","1.21"]
+        os: [ubuntu-latest]
+
+    steps:
+    - name: Setup
+      uses: actions/checkout@v4
+      
+    - name: Set up Go ${{ matrix.go_version }}
+      uses: actions/setup-go@v4
+      with:
+        go-version: ${{ matrix.go_version }}
+      id: go
+
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
+    - name: Module Operations
+      run: |
+        sudo make tidy
+        sudo make tools.verify.go-gitlint
+
+    - name: Format Code
+      run: sudo make format
+      continue-on-error: true
+
+    - name: Generate Files
+      run: make gen
+      continue-on-error: true
+
+    - name: Build Source
+      run: sudo make build
+
+    - name: Cleanup Build
+      run: sudo make clean
+
+    - name: Push Changes to Main
+      uses: stefanzweifel/git-auto-commit-action@v5
+      with:
+        commit_message: "cicd: robot automated Change"
+        branch: main
+      continue-on-error: true
+
+    - name: Set Current Directory
+      id: set_directory
+      run: echo "::set-output name=directory::$(pwd)"
+      continue-on-error: true
+
+    - name: Collect and Display Test Coverage
+      id: collect_coverage
+      run: |
+        cd ${{ steps.set_directory.outputs.directory }}
+        make cover
+        echo "::set-output name=coverage_file::./_output/tmp/coverage.out"
+        echo "Test Coverage:"
+        cat ${{ steps.collect_coverage.outputs.coverage_file }}
+      continue-on-error: true
+
+  openim-start:
+    name: Test OpenIM install/start on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    environment:
+      name: openim
+    strategy:
+      matrix:
+        go_version: ["1.21"]
+        os: ["ubuntu-latest"]
+    steps:
+    - name: Checkout and Install OpenIM
+      uses: actions/checkout@v4
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+    - name: Run OpenIM make install start
+      run: |
+        sudo make install
+
+  execute-scripts:
+    name: Execute OpenIM Script On ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    environment:
+      name: openim
+    strategy:
+      matrix:
+        go_version: ["1.20"]
+        os: ["ubuntu-latest", "macos-latest"]
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v4
+
+    - name: Set up Go ${{ matrix.go_version }}
+      uses: actions/setup-go@v4
+      with:
+        go-version: ${{ matrix.go_version }}
+      id: go
+
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
+    # - name: Install latest Bash (macOS only)
+    #   if: runner.os == 'macOS'
+    #   run: |
+    #     /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
+    #     brew update
+    
+    #     brew install bash
+    #     brew install gnu-sed
+    
+    #     echo "/usr/local/bin" >> $GITHUB_PATH
+    #     echo "$(brew --prefix)/opt/gnu-sed/libexec/gnubin" >> $GITHUB_PATH
+    #   continue-on-error: true
+
+    - name: Set up Docker for Ubuntu
+      if: runner.os == 'Linux'
+      run: |
+        sudo make init
+        sudo docker compose up -d
+        sudo sleep 20
+
+    # - name: Set up Docker for macOS
+    #   if: runner.os == 'macOS'
+    #   run: |
+    #     brew install --cask docker
+    #     open /Applications/Docker.app
+
+    #     sleep 10
+    #     docker-compose --version || brew install docker-compose
+
+    #     docker-compose up -d
+    #     sleep 20
+
+    - name: Module Operations for Ubuntu
+      if: runner.os == 'Linux'
+      run: |
+        sudo make tidy
+        sudo make tools.verify.go-gitlint
+
+    # - name: Module Operations for macOS
+    #   if: runner.os == 'macOS'
+    #   run: |
+    #     make tidy
+    #     make tools.verify.go-gitlint
+
+    - name: Build, Start, Check Services and Print Logs for Ubuntu
+      if: runner.os == 'Linux'
+      run: |
+        sudo make build && \
+        sudo make start && \
+        sudo make check || \
+        (echo "An error occurred, printing logs:" && sudo cat ./_output/logs/* 2>/dev/null)
+
+    - name: Restart Services and Print Logs for Ubuntu
+      if: runner.os == 'Linux'
+      run: |
+        sudo make restart
+        sudo make check
+
+    # - name: Build, Start, Check Services and Print Logs for macOS
+    #   if: runner.os == 'macOS'
+    #   run: |
+    #     make init && \
+    #     make build && \
+    #     make start && \
+    #     make check || \
+    #     (echo "An error occurred, printing logs:" && sudo cat ./_output/logs/* 2>/dev/null)
+
+  openim-test-build-image:
+    name: Build OpenIM Docker Image
+    runs-on: ubuntu-latest
+    environment:
+      name: openim
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v4
+    - name: Set up Go ${{ matrix.go_version }}
+      uses: actions/setup-go@v4
+      with:
+        go-version: ${{ matrix.go_version }}
+      id: go
+
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
+    - name: Test Docker Build
+      run: |
+        sudo make init
+        sudo make image

.github/workflows/project-progress.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # GitHub recommends pinning actions to a commit SHA.
 # To get a newer version, you will need to update the SHA.
 # You can also reference a tag or branch, but the action may change without warning.
@@ -17,6 +31,6 @@ jobs:
     steps:
       - uses: alex-page/github-project-automation-plus@v0.8.3
         with:
-          project: OpenIM 2023 Sprint 🔥
+          project: openim-powerful
           column: In Progress
           repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/pull-request.yml

@@ -0,0 +1,115 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Github Pull Request
+on:
+  push:
+    branches: [main]
+    paths-ignore:
+      - 'README.md'
+      - 'CONTRIBUTING.md'
+      - 'docs/**'
+  workflow_dispatch:
+  schedule:
+    - cron: '0 2 * * *'
+
+permissions:
+  contents: write
+  pull-requests: write
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+      - name: checkout
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
+      - name: Get League branch Patch
+        run: |
+          git config user.name 'openimbot'
+          git config user.email 'openimsdk@qq.com'
+          BRANCH_NAME="auto-pr-$(date +'%Y%m%d%H%M%S')"
+          git checkout -b $BRANCH_NAME
+
+      - uses: actions/setup-node@v4
+      - name: Setup Go
+        uses: actions/setup-go@v4
+      - name: Run go modules tidy
+        run: |
+          sudo make tidy
+          sudo make tools.verify.go-gitlint
+          echo "Run go modules tidy successfully" 
+        continue-on-error: true
+
+      - name: Run go format
+        run: |
+          sudo make format
+          echo "Run go format successfully" 
+        continue-on-error: true
+
+      - name: Run go lint
+        run: |
+          sudo make lint
+          echo "Run go lint successfully" 
+        continue-on-error: true
+
+      - name: Generate all necessary files, such as error code files
+        run: |
+          make generate
+          echo "Generate all necessary files successfully" 
+        continue-on-error: true
+
+      - name: Run unit test and get test coverage
+        run: |
+          make cover
+          echo "Run unit test and get test coverage successfully" 
+        continue-on-error: true
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v2
+
+      - name: OpenIM verify copyright
+        run: |
+          sudo make verify-copyright
+          sudo make add-copyright
+          echo "OpenIM verify successfully" 
+        continue-on-error: true
+
+      - name: Create Pull Request
+        uses: peter-evans/create-pull-request@v5
+        with:
+          token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          commit-message: "cicd: bump League Patch"
+          author: kubbot <kubbot@3293172751ysy@gmail.com>
+          signoff: false
+          draft: false
+          branch: ''
+          assignees: cubxxw
+          reviewers: cubxxw
+          delete-branch: true
+          title: "Bump League Patch auto PR: $(date +'%Y%m%d')"
+          body: |
+            Review criteria:
+
+            - [ ] Disenchanter can connect and issue actions
+            
+            This is an automated PR. @ $(date +'%Y%m%d')
+            <sub>[workflow](https://github.com/openimsdk/open-im-server/blob/main/.github/workflows/pull-request.yml).</sub>
+          base: main
+          labels: |
+            kind/documentation
+            enhancement
+            report

.github/workflows/release-drafter.yml

@@ -0,0 +1,55 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Release Drafter
+
+on:
+  push:
+    # branches to consider in the event; optional, defaults to all
+    branches:
+      - main
+  # pull_request event is required only for autolabeler
+  pull_request:
+    # Only following types are handled by the action, but one can default to all as well
+    # types: [opened, reopened, synchronize]
+  # pull_request_target event is required for autolabeler to support PRs from forks
+  # pull_request_target:
+  #   types: [opened, reopened, synchronize]
+
+permissions:
+  contents: read
+
+jobs:
+  update_release_draft:
+    permissions:
+      # write permission is required to create a github release
+      contents: write
+      # write permission is required for autolabeler
+      # otherwise, read permission is required at least
+      pull-requests: write
+    runs-on: ubuntu-latest
+    steps:
+      # (Optional) GitHub Enterprise requires GHE_HOST variable set
+      #- name: Set GHE_HOST
+      #  run: |
+      #    echo "GHE_HOST=${GITHUB_SERVER_URL##https:\/\/}" >> $GITHUB_ENV
+
+      # Drafts your next Release notes as Pull Requests are merged into "master"
+      - uses: release-drafter/release-drafter@v5
+        # (Optional) specify config name to use, relative to .github/. Default: release-drafter.yml
+        # with:
+        #   config-name: my-config.yml
+        #   disable-autolabeler: true
+        env:
+          GITHUB_TOKEN: ${{ secrets.REDBOT_GITHUB_TOKEN }}

.github/workflows/release.yml

@@ -1,4 +1,18 @@
-name: goreleaser
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Server Release Workflow
 
 on:
   push:
@@ -8,14 +22,14 @@ on:
 
 permissions:
   contents: write
-  # packages: write
-  # issues: write
+  packages: write
+  issues: write
 
 jobs:
   goreleaser:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
         with:
           fetch-depth: 0
       - run: git fetch --force --tags
@@ -24,14 +38,44 @@ jobs:
           go-version: stable
       # More assembly might be required: Docker logins, GPG, etc. It all depends
       # on your needs.
-      - uses: goreleaser/goreleaser-action@v4
+      - uses: goreleaser/goreleaser-action@v5
         with:
           # either 'goreleaser' (default) or 'goreleaser-pro':
           distribution: goreleaser
           version: latest
-          args: release --clean
+          workdir: .
+          args: release -f ./build/goreleaser.yaml --clean --release-footer-tmpl=scripts/template/footer.md.tmpl --release-header-tmpl=scripts/template/head.md.tmpl
         env:
+          USERNAME: ${{ github.repository_owner }}
           GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+          FURY_TOKEN: ${{ secrets.FURY_TOKEN }}
           # Your GoReleaser Pro key, if you are using the 'goreleaser-pro'
           # distribution:
           # GORELEASER_KEY: ${{ secrets.GORELEASER_KEY }}
+
+  goreleaser-check-pkgs:
+    runs-on: ubuntu-latest
+    env:
+      DOCKER_CLI_EXPERIMENTAL: "enabled"
+    needs: [ goreleaser ]
+    if: github.ref == 'refs/heads/main'
+    strategy:
+      matrix:
+        format: [ deb, rpm, apk ]
+    steps:
+      - uses: actions/checkout@v4 # v3
+        with:
+          fetch-depth: 0
+      - uses: arduino/setup-task@e26d8975574116b0097a1161e0fe16ba75d84c1c # v1
+        with:
+          version: 3.x
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+      - uses: docker/setup-qemu-action@326560df218a7ea9cf6ab49bbc88b8b306bb437e # v2
+      - uses: actions/cache@88522ab9f39a2ea568f7027eddc7d8d8bc9d59c8 # v3
+        with:
+          path: |
+            ./_output/dist/*.deb
+            ./_output/dist/*.rpm
+            ./_output/dist/*.apk
+          key: ${{ github.ref }}
+      - run: task goreleaser:test:${{ matrix.format }}

.github/workflows/scripts-test.yml

@@ -1,69 +0,0 @@
-name: OpenIM Start Execute Scripts
-
-on: 
-    push:
-      branches:
-          - main
-      paths-ignore:
-          - "docs/**"
-          - "README.md"
-          - "README_zh-CN.md"
-          - "CONTRIBUTING.md"
-    pull_request:
-      branches:
-          - main
-      paths-ignore:
-          - "README.md"
-          - "README_zh-CN.md"
-          - "CONTRIBUTING.md"
-          - "docs/**"
-
-jobs:
-  execute-scripts:
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Checkout code
-      uses: actions/checkout@v2
-
-    - name: Start Docker Compose
-      run: |
-        docker-compose stop
-        docker-compose up -d
-        sleep 60
-
-    - name: Stop all services
-      run: |
-        chmod +x ./scripts/stop_all.sh
-        ./scripts/stop_all.sh
-      shell: bash
-
-    - name: Build all services
-      run: |
-        chmod +x ./scripts/build_all_service.sh
-        ./scripts/build_all_service.sh
-        cat logs/openIM.log
-      shell: bash
-
-    - name: Start all services
-      run: |
-        chmod +x ./scripts/start_all.sh
-        ./scripts/start_all.sh
-        cat logs/openIM.log
-      continue-on-error: true
-      shell: bash
-
-    - name: Check all services
-      run: |
-        chmod +x ./scripts/check_all.sh
-        ./scripts/check_all.sh
-        cat logs/openIM.log
-      shell: bash
-      continue-on-error: true
-
-    - name: Print openIM.log
-      run: |
-        cat logs/openIM.log
-        cat logs/openIM.log  >> "$GITHUB_OUTPUT"
-      shell: bash
-      continue-on-error: true

.github/workflows/stale.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # This workflow warns and then closes issues and PRs that have had no activity for a specified amount of time.
 #
 # You can adjust the behavior by modifying this file.
@@ -18,7 +32,7 @@ jobs:
       pull-requests: write
 
     steps:
-    - uses: actions/stale@v5
+    - uses: actions/stale@v8
       with:
         repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}
         days-before-stale: 60

.github/workflows/sync-release.yml

@@ -0,0 +1,43 @@
+# Copyright © 2023 KubeCub open source community. All rights reserved.
+# Licensed under the MIT License (the "License");
+# you may not use this file except in compliance with the License.
+
+# https://github.com/BetaHuhn/repo-file-sync-action
+name: Synchronize kubecub public code to other repositories
+on:
+    push:
+        paths:
+            - scripts/*
+            - docs/*
+            - config/*
+        branches:
+          - release-v*.*
+    workflow_dispatch:
+
+jobs:
+  sync:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Run GitHub File Sync
+        uses: BetaHuhn/repo-file-sync-action@latest
+        with:
+          GH_INSTALLATION_TOKEN: "${{ secrets.BOT_GITHUB_TOKEN }}"
+          CONFIG_PATH: .github/sync-release.yml
+          ORIGINAL_MESSAGE: true
+          SKIP_PR: true
+          COMMIT_EACH_FILE: false
+          COMMIT_BODY: "🤖 kubbot to synchronize the warehouse"
+          GIT_EMAIL: "3293172751ysy@gmail.com"
+          GIT_USERNAME: "kubbot"
+          PR_BODY: 👌 kubecub provides automated community services
+          REVIEWERS: |
+            kubbot
+            cubxxw
+          PR_LABELS: |
+            file-sync
+            automerge
+          ASSIGNEES: |
+            kubbot

.github/workflows/sync.yml

@@ -15,7 +15,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Run GitHub File Sync
         uses: BetaHuhn/repo-file-sync-action@latest

.gitignore

@@ -22,26 +22,26 @@ logs
 .devcontainer
 components
 out-test
+Dockerfile.cross
 
 ### Makefile ###
 tmp/
 bin/
 output/
 _output/
+deployments/charts/generated-configs/
+
+### OpenIM Config ###
+.env
+config/config.yaml
+config/alertmanager.yml
+config/prometheus.yml
+config/email.tmpl
+config/notification.yaml
+config/instance-down-rules.yml
 
 ### OpenIM deploy ###
-deploy/openim_demo
-deploy/openim-api
-deploy/openim-rpc-msg_gateway
-deploy/openim-msgtransfer
-deploy/openim-push
-deploy/openim_timer_task
-deploy/openim-rpc-user
-deploy/openim-rpc-friend
-deploy/openim-rpc-group
-deploy/openim-rpc-msg
-deploy/openim-rpc-auth
-deploy/Open-IM-SDK-Core
+deployments/openim-server/charts
 
 # files used by the developer
 .idea.md
@@ -152,10 +152,11 @@ flycheck_*.el
 *.out
 
 # Dependency directories (remove the comment below to include it)
-# vendor/
+vendor/
 
 # Go workspace file
-go.work
+# go.work
+go.work.sum
 
 ### JetBrains ###
 # Covers JetBrains IDEs: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm, CLion, Android Studio, WebStorm and Rider
@@ -389,4 +390,5 @@ Sessionx.vim
 [._]*.un~
 
 # End of https://www.toptal.com/developers/gitignore/api/go,git,vim,tags,test,emacs,backup,jetbrains
-.idea
+.idea
+dist/

.golangci.yml

@@ -113,7 +113,7 @@ linters-settings:
     max-blank-identifiers: 2
   dupl:
     # tokens count to trigger issue, 150 by default
-    threshold: 100
+    threshold: 200
   errcheck:
     # report about not checking of errors in type assertions: `a := b.(MyStruct)`;
     # default is false: such cases aren't reported by default.
@@ -171,12 +171,12 @@ linters-settings:
   #   exclude_godoc_examples: false
   funlen:
     lines: 150
-    statements: 50
+    statements: 80
   gci:
     # put imports beginning with prefix after 3rd-party packages;
     # only support one prefix
     # if not set, use goimports.local-prefixes
-    prefix: github.com/OpenIMSDK/OpenKF
+    prefix: github.com/openimsdk/open-im-server
   gocognit:
     # minimal code complexity to report, 30 by default (but we recommend 10-20)
     min-complexity: 30
@@ -333,10 +333,8 @@ linters-settings:
   goimports:
     # put imports beginning with prefix after 3rd-party packages;
     # it's a comma-separated list of prefixes
-    local-prefixes: github.com/OpenIMSDK/OpenKF
-  golint:
-    # minimal confidence for issues, default is 0.8
-    min-confidence: 0.9
+    local-prefixes: github.com/openimsdk/open-im-server
+
   gomnd:
     settings:
       mnd:
@@ -363,13 +361,17 @@ linters-settings:
         - gorm.io/gorm
         - gorm.io/driver/mysql
         - k8s.io/klog
+        - github.com/allowed/module
+        - go.mongodb.org/mongo-driver/mongo
         # - gopkg.in/yaml.v2
       domains:                                                        # List of allowed module domains
         - google.golang.org
         - gopkg.in
         - golang.org
         - github.com
+        - go.mongodb.org
         - go.uber.org
+        - openim.io
         - go.etcd.io
     blocked:
       versions:
@@ -442,12 +444,7 @@ linters-settings:
   #   packages-with-error-message:
   #     # specify an error message to output when a blacklisted package is used
   #     - github.com/Sirupsen/logrus: "logging is allowed only by logutils.Log"
-  ifshort:
-    # Maximum length of variable declaration measured in number of lines, after which linter won't suggest using short syntax.
-    # Has higher priority than max-decl-chars.
-    max-decl-lines: 1
-    # Maximum length of variable declaration measured in number of characters, after which linter won't suggest using short syntax.
-    max-decl-chars: 30
+
 
   importas:
     # if set to `true`, force to use alias.
@@ -718,88 +715,18 @@ linters:
   # enable-all: true
   disable-all: true
   enable:
-    - typecheck
-    - asciicheck
-    - bodyclose
-    - cyclop
-    - deadcode
-    # - depguard
-    - dogsled
-    - dupl
-    - durationcheck
-    - errcheck
-    - errorlint
-    - exhaustive
-    - exportloopref
-    # - forbidigo
-    - funlen
-    # - gci
-    # - gochecknoinits
-    - gocognit
-    - goconst
-    - gocyclo
-    - godot
-    - godox
-    - gofmt
-    - gofumpt
-    - goheader
-    - goimports
-    - gomoddirectives
-    - gomodguard
-    - goprintffuncname
-    - gosec
-    - gosimple
-    - govet
-    - ifshort
-    - importas
-    - ineffassign
-    - lll
-    - makezero
-    - misspell
-    - nakedret
-    - nestif
-    - nilerr
-    - nlreturn
-    - noctx
-    - nolintlint
-    - paralleltest
-    - prealloc
-    - predeclared
-    - promlinter
-    - revive
-    - rowserrcheck
-    - sqlclosecheck
-    - staticcheck
-    - structcheck
-    - stylecheck
-    - thelper
-    - tparallel
-    - unconvert
-    - unparam
-    - unused
-    - varcheck
-    - wastedassign
-    - whitespace
-    - bidichk
-    - wastedassign
-    - golint
-    - execinquery
-    - nosprintfhostport
-    - grouper
-    - decorder
-    - errchkjson
-    - maintidx
-      #- containedctx
-      #- tagliatelle
-      #- nonamedreturns
-      #- nilnil
-      #- tenv
-      #- varnamelen
-      #- contextcheck
-      #- errname
-      #- ForceTypeAssert
-      #- nilassign
-  fast: false
+    - typecheck     # 基本的类型检查
+    - gofmt         # 格式检查
+    - govet         # Go 语言的标准检查工具
+    - gosimple      # 简化代码的建议
+    - misspell      # 拼写错误
+    - staticcheck   # 静态检查
+    - unused        # 未使用的代码检查
+    - goimports     # 检查导入是否正确排序和格式化
+    - godot         # 注释句点检查
+    - bodyclose     # 确保 HTTP response body 被关闭
+    - errcheck      # 检查是否遗漏了错误返回值
+  fast: true
 
 issues:
   # List of regexps of issue texts to exclude, empty list by default.
@@ -813,10 +740,6 @@ issues:
 
   # Excluding configuration per-path, per-linter, per-text and per-source
   exclude-rules:
-    - linters:
-      - golint
-      path: (internal/api/.*)\.go # exclude golint for internal/api/... files
-
     - linters:
       - revive
       path: (log/.*)\.go
@@ -856,9 +779,7 @@ issues:
 
     - path: (pkg/app/.*)\.go
       linters:
-        - deadcode
         - unused
-        - varcheck
         - forbidigo
 
     # Exclude some staticcheck messages

CHANGELOG/.chglog/config.yml

@@ -3,7 +3,7 @@ style: github
 template: CHANGELOG.tpl.md
 info:
   title: CHANGELOG
-  repository_url: https://github.com/OpenIMSDK/Open-IM-Server
+  repository_url: https://github.com/openimsdk/open-im-server
 options:
   tag_filter_pattern: '^v'
   sort: "date"

CHANGELOG/CHANGELOG-1.0.md

@@ -47,10 +47,10 @@
 - update
 
 
-[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.7...HEAD
-[v1.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.6...v1.0.7
-[v1.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.5...v1.0.6
-[v1.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.4...v1.0.5
-[v1.0.4]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.3...v1.0.4
-[v1.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.1...v1.0.3
-[v1.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.0...v1.0.1
+[Unreleased]: https://github.com/openimsdk/open-im-server/compare/v1.0.7...HEAD
+[v1.0.7]: https://github.com/openimsdk/open-im-server/compare/v1.0.6...v1.0.7
+[v1.0.6]: https://github.com/openimsdk/open-im-server/compare/v1.0.5...v1.0.6
+[v1.0.5]: https://github.com/openimsdk/open-im-server/compare/v1.0.4...v1.0.5
+[v1.0.4]: https://github.com/openimsdk/open-im-server/compare/v1.0.3...v1.0.4
+[v1.0.3]: https://github.com/openimsdk/open-im-server/compare/v1.0.1...v1.0.3
+[v1.0.1]: https://github.com/openimsdk/open-im-server/compare/v1.0.0...v1.0.1

CHANGELOG/CHANGELOG-2.0.md

@@ -1,53 +1,22 @@
-# Version logging for OpenIM:v2.0
-
-> **Note**:
-> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+# Version logging for OpenIM
 
 <!-- BEGIN MUNGE: GENERATED_TOC -->
 
-- [Version logging for OpenIM:v2.0](#version-logging-for-openimv20)
-  - [\[Unreleased\]](#unreleased)
-  - [\[v2.0.10\] - 2022-05-13](#v2010---2022-05-13)
-  - [\[v2.0.9\] - 2022-04-29](#v209---2022-04-29)
-    - [Reverts](#reverts)
-    - [Pull Requests](#pull-requests)
-  - [\[v2.0.8\] - 2022-04-24](#v208---2022-04-24)
-    - [Pull Requests](#pull-requests-1)
-  - [\[v2.0.7\] - 2022-04-08](#v207---2022-04-08)
-    - [Pull Requests](#pull-requests-2)
-  - [\[v2.0.6\] - 2022-04-01](#v206---2022-04-01)
-    - [Pull Requests](#pull-requests-3)
-  - [\[v2.0.5\] - 2022-03-24](#v205---2022-03-24)
-  - [\[v2.04\] - 2022-03-18](#v204---2022-03-18)
-  - [\[v2.0.3\] - 2022-03-11](#v203---2022-03-11)
-  - [\[v2.0.2\] - 2022-03-04](#v202---2022-03-04)
-    - [Pull Requests](#pull-requests-4)
-  - [\[v2.0.1\] - 2022-02-25](#v201---2022-02-25)
-  - [v2.0.0 - 2022-02-23](#v200---2022-02-23)
-    - [Reverts](#reverts-1)
-
 <!-- END MUNGE: GENERATED_TOC -->
 
-
 <a name="unreleased"></a>
-
 ## [Unreleased]
 
 
 <a name="v2.0.10"></a>
-
 ## [v2.0.10] - 2022-05-13
 
 <a name="v2.0.9"></a>
-
 ## [v2.0.9] - 2022-04-29
-
 ### Reverts
-
-- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- update etcd to v3.5.2 ([#206](https://github.com/openimsdk/open-im-server/issues/206))
 
 ### Pull Requests
-
 - Merge branch 'tuoyun'
 - Merge branch 'tuoyun'
 - Merge branch 'tuoyun'
@@ -57,53 +26,38 @@
 
 
 <a name="v2.0.8"></a>
-
 ## [v2.0.8] - 2022-04-24
-
 ### Pull Requests
-
 - Merge branch 'tuoyun'
 - Merge branch 'tuoyun'
 
 
 <a name="v2.0.7"></a>
-
 ## [v2.0.7] - 2022-04-08
-
 ### Pull Requests
-
 - Merge branch 'tuoyun'
 - Merge branch 'tuoyun'
 - Merge branch 'tuoyun'
 
 
 <a name="v2.0.6"></a>
-
 ## [v2.0.6] - 2022-04-01
-
 ### Pull Requests
-
 - Merge branch 'tuoyun'
 
 
 <a name="v2.0.5"></a>
-
 ## [v2.0.5] - 2022-03-24
 
 <a name="v2.04"></a>
-
 ## [v2.04] - 2022-03-18
 
 <a name="v2.0.3"></a>
-
 ## [v2.0.3] - 2022-03-11
 
 <a name="v2.0.2"></a>
-
 ## [v2.0.2] - 2022-03-04
-
 ### Pull Requests
-
 - Merge branch 'tuoyun'
 - Merge branch 'tuoyun'
 - Merge branch 'tuoyun'
@@ -111,11 +65,23 @@
 
 
 <a name="v2.0.1"></a>
-
 ## [v2.0.1] - 2022-02-25
 
 <a name="v2.0.0"></a>
-
 ## v2.0.0 - 2022-02-23
-
 ### Reverts
+- friend modify
+- update
+
+
+[Unreleased]: https://github.com/openimsdk/open-im-server/compare/v2.0.10...HEAD
+[v2.0.10]: https://github.com/openimsdk/open-im-server/compare/v2.0.9...v2.0.10
+[v2.0.9]: https://github.com/openimsdk/open-im-server/compare/v2.0.8...v2.0.9
+[v2.0.8]: https://github.com/openimsdk/open-im-server/compare/v2.0.7...v2.0.8
+[v2.0.7]: https://github.com/openimsdk/open-im-server/compare/v2.0.6...v2.0.7
+[v2.0.6]: https://github.com/openimsdk/open-im-server/compare/v2.0.5...v2.0.6
+[v2.0.5]: https://github.com/openimsdk/open-im-server/compare/v2.04...v2.0.5
+[v2.04]: https://github.com/openimsdk/open-im-server/compare/v2.0.3...v2.04
+[v2.0.3]: https://github.com/openimsdk/open-im-server/compare/v2.0.2...v2.0.3
+[v2.0.2]: https://github.com/openimsdk/open-im-server/compare/v2.0.1...v2.0.2
+[v2.0.1]: https://github.com/openimsdk/open-im-server/compare/v2.0.0...v2.0.1

CHANGELOG/CHANGELOG-2.1.md

@@ -21,7 +21,7 @@
 <a name="v2.1.0"></a>
 ## v2.1.0 - 2022-06-17
 ### Reverts
-- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- update etcd to v3.5.2 ([#206](https://github.com/openimsdk/open-im-server/issues/206))
 - friend modify
 - update
 
@@ -47,4 +47,4 @@
 - Merge branch 'tuoyun'
 
 
-[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.1.0...HEAD
+[Unreleased]: https://github.com/openimsdk/open-im-server/compare/v2.1.0...HEAD

CHANGELOG/CHANGELOG-2.2.md

@@ -21,7 +21,7 @@
 <a name="v2.2.0"></a>
 ## v2.2.0 - 2022-07-01
 ### Reverts
-- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- update etcd to v3.5.2 ([#206](https://github.com/openimsdk/open-im-server/issues/206))
 - friend modify
 - update
 
@@ -47,4 +47,4 @@
 - Merge branch 'tuoyun'
 
 
-[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.2.0...HEAD
+[Unreleased]: https://github.com/openimsdk/open-im-server/compare/v2.2.0...HEAD

CHANGELOG/CHANGELOG-2.3.md

@@ -37,7 +37,7 @@
 <a name="v2.3.0-rc0"></a>
 ## v2.3.0-rc0 - 2022-07-15
 ### Reverts
-- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- update etcd to v3.5.2 ([#206](https://github.com/openimsdk/open-im-server/issues/206))
 - friend modify
 - update
 
@@ -63,8 +63,8 @@
 - Merge branch 'tuoyun'
 
 
-[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.3...HEAD
-[v2.3.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.2...v2.3.3
-[v2.3.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc2...v2.3.2
-[v2.3.0-rc2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc1...v2.3.0-rc2
-[v2.3.0-rc1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc0...v2.3.0-rc1
+[Unreleased]: https://github.com/openimsdk/open-im-server/compare/v2.3.3...HEAD
+[v2.3.3]: https://github.com/openimsdk/open-im-server/compare/v2.3.2...v2.3.3
+[v2.3.2]: https://github.com/openimsdk/open-im-server/compare/v2.3.0-rc2...v2.3.2
+[v2.3.0-rc2]: https://github.com/openimsdk/open-im-server/compare/v2.3.0-rc1...v2.3.0-rc2
+[v2.3.0-rc1]: https://github.com/openimsdk/open-im-server/compare/v2.3.0-rc0...v2.3.0-rc1

CHANGELOG/CHANGELOG-2.9.md

@@ -38,15 +38,15 @@
 <a name="v2.9.0"></a>
 ## v2.9.0 - 2023-07-04
 ### Reverts
-- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- update etcd to v3.5.2 ([#206](https://github.com/openimsdk/open-im-server/issues/206))
 
 ### Pull Requests
 - Merge branch 'tuoyun'
 
 
-[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+1.839643f...HEAD
-[v2.9.0+1.839643f]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+2.35f07fe...v2.9.0+1.839643f
-[v2.9.0+2.35f07fe]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+1.b5072b1...v2.9.0+2.35f07fe
-[v2.9.0+1.b5072b1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+3.2667a3a...v2.9.0+1.b5072b1
-[v2.9.0+3.2667a3a]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+7.04818ca...v2.9.0+3.2667a3a
-[v2.9.0+7.04818ca]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0...v2.9.0+7.04818ca
+[Unreleased]: https://github.com/openimsdk/open-im-server/compare/v2.9.0+1.839643f...HEAD
+[v2.9.0+1.839643f]: https://github.com/openimsdk/open-im-server/compare/v2.9.0+2.35f07fe...v2.9.0+1.839643f
+[v2.9.0+2.35f07fe]: https://github.com/openimsdk/open-im-server/compare/v2.9.0+1.b5072b1...v2.9.0+2.35f07fe
+[v2.9.0+1.b5072b1]: https://github.com/openimsdk/open-im-server/compare/v2.9.0+3.2667a3a...v2.9.0+1.b5072b1
+[v2.9.0+3.2667a3a]: https://github.com/openimsdk/open-im-server/compare/v2.9.0+7.04818ca...v2.9.0+3.2667a3a
+[v2.9.0+7.04818ca]: https://github.com/openimsdk/open-im-server/compare/v2.9.0...v2.9.0+7.04818ca

CHANGELOG/CHANGELOG-3.0.md

@@ -47,7 +47,7 @@
 <a name="v2.9.0"></a>
 ## [v2.9.0] - 2023-07-04
 ### Reverts
-- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- update etcd to v3.5.2 ([#206](https://github.com/openimsdk/open-im-server/issues/206))
 
 ### Pull Requests
 - Merge branch 'tuoyun'
@@ -85,7 +85,7 @@
 <a name="v2.0.9"></a>
 ## [v2.0.9] - 2022-04-29
 ### Reverts
-- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- update etcd to v3.5.2 ([#206](https://github.com/openimsdk/open-im-server/issues/206))
 
 ### Pull Requests
 - Merge branch 'tuoyun'
@@ -161,28 +161,28 @@
 - update
 
 
-[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0...HEAD
-[v2.9.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.3...v2.9.0
-[v2.3.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.2...v2.3.3
-[v2.3.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc2...v2.3.2
-[v2.3.0-rc2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc1...v2.3.0-rc2
-[v2.3.0-rc1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc0...v2.3.0-rc1
-[v2.3.0-rc0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.2.0...v2.3.0-rc0
-[v2.2.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.1.0...v2.2.0
-[v2.1.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.10...v2.1.0
-[v2.0.10]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.9...v2.0.10
-[v2.0.9]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.7...v2.0.9
-[v2.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.6...v2.0.7
-[v2.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.5...v2.0.6
-[v2.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.04...v2.0.5
-[v2.04]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.3...v2.04
-[v2.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.2...v2.0.3
-[v2.0.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.1...v2.0.2
-[v2.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.0...v2.0.1
-[v2.0.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.7...v2.0.0
-[v1.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.6...v1.0.7
-[v1.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.5...v1.0.6
-[v1.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.4...v1.0.5
-[v1.0.4]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.3...v1.0.4
-[v1.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.1...v1.0.3
-[v1.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.0...v1.0.1
+[Unreleased]: https://github.com/openimsdk/open-im-server/compare/v2.9.0...HEAD
+[v2.9.0]: https://github.com/openimsdk/open-im-server/compare/v2.3.3...v2.9.0
+[v2.3.3]: https://github.com/openimsdk/open-im-server/compare/v2.3.2...v2.3.3
+[v2.3.2]: https://github.com/openimsdk/open-im-server/compare/v2.3.0-rc2...v2.3.2
+[v2.3.0-rc2]: https://github.com/openimsdk/open-im-server/compare/v2.3.0-rc1...v2.3.0-rc2
+[v2.3.0-rc1]: https://github.com/openimsdk/open-im-server/compare/v2.3.0-rc0...v2.3.0-rc1
+[v2.3.0-rc0]: https://github.com/openimsdk/open-im-server/compare/v2.2.0...v2.3.0-rc0
+[v2.2.0]: https://github.com/openimsdk/open-im-server/compare/v2.1.0...v2.2.0
+[v2.1.0]: https://github.com/openimsdk/open-im-server/compare/v2.0.10...v2.1.0
+[v2.0.10]: https://github.com/openimsdk/open-im-server/compare/v2.0.9...v2.0.10
+[v2.0.9]: https://github.com/openimsdk/open-im-server/compare/v2.0.7...v2.0.9
+[v2.0.7]: https://github.com/openimsdk/open-im-server/compare/v2.0.6...v2.0.7
+[v2.0.6]: https://github.com/openimsdk/open-im-server/compare/v2.0.5...v2.0.6
+[v2.0.5]: https://github.com/openimsdk/open-im-server/compare/v2.04...v2.0.5
+[v2.04]: https://github.com/openimsdk/open-im-server/compare/v2.0.3...v2.04
+[v2.0.3]: https://github.com/openimsdk/open-im-server/compare/v2.0.2...v2.0.3
+[v2.0.2]: https://github.com/openimsdk/open-im-server/compare/v2.0.1...v2.0.2
+[v2.0.1]: https://github.com/openimsdk/open-im-server/compare/v2.0.0...v2.0.1
+[v2.0.0]: https://github.com/openimsdk/open-im-server/compare/v1.0.7...v2.0.0
+[v1.0.7]: https://github.com/openimsdk/open-im-server/compare/v1.0.6...v1.0.7
+[v1.0.6]: https://github.com/openimsdk/open-im-server/compare/v1.0.5...v1.0.6
+[v1.0.5]: https://github.com/openimsdk/open-im-server/compare/v1.0.4...v1.0.5
+[v1.0.4]: https://github.com/openimsdk/open-im-server/compare/v1.0.3...v1.0.4
+[v1.0.3]: https://github.com/openimsdk/open-im-server/compare/v1.0.1...v1.0.3
+[v1.0.1]: https://github.com/openimsdk/open-im-server/compare/v1.0.0...v1.0.1

CHANGELOG/CHANGELOG-3.1.md

@@ -0,0 +1,20 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v3.1.0"></a>
+## v3.1.0 - 2023-07-28
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/openimsdk/open-im-server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/openimsdk/open-im-server/compare/v3.1.0...HEAD

CHANGELOG/CHANGELOG-3.2.md

@@ -0,0 +1,32 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v3.2.2-alpha.0"></a>
+## [v3.2.2-alpha.0] - 2023-08-25
+
+<a name="v3.2.0"></a>
+## [v3.2.0] - 2023-08-19
+
+<a name="v3.2.0-rc.0"></a>
+## [v3.2.0-rc.0] - 2023-08-17
+
+<a name="v3.2.0-alpha.0"></a>
+## v3.2.0-alpha.0 - 2023-08-16
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/openimsdk/open-im-server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/openimsdk/open-im-server/compare/v3.2.2-alpha.0...HEAD
+[v3.2.2-alpha.0]: https://github.com/openimsdk/open-im-server/compare/v3.2.0...v3.2.2-alpha.0
+[v3.2.0]: https://github.com/openimsdk/open-im-server/compare/v3.2.0-rc.0...v3.2.0
+[v3.2.0-rc.0]: https://github.com/openimsdk/open-im-server/compare/v3.2.0-alpha.0...v3.2.0-rc.0

CHANGELOG/CHANGELOG-3.3.md

@@ -0,0 +1,40 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v3.3.1"></a>
+## [v3.3.1] - 2023-09-13
+
+<a name="v3.3.1-beta.0"></a>
+## [v3.3.1-beta.0] - 2023-09-11
+
+<a name="v3.3.0-rc.1"></a>
+## [v3.3.0-rc.1] - 2023-09-11
+
+<a name="v3.3.0-rc.12"></a>
+## [v3.3.0-rc.12] - 2023-09-11
+
+<a name="v3.3.0"></a>
+## [v3.3.0] - 2023-09-09
+
+<a name="v3.3.0-rc.0"></a>
+## v3.3.0-rc.0 - 2023-09-07
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/openimsdk/open-im-server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/openimsdk/open-im-server/compare/v3.3.1...HEAD
+[v3.3.1]: https://github.com/openimsdk/open-im-server/compare/v3.3.1-beta.0...v3.3.1
+[v3.3.1-beta.0]: https://github.com/openimsdk/open-im-server/compare/v3.3.0-rc.1...v3.3.1-beta.0
+[v3.3.0-rc.1]: https://github.com/openimsdk/open-im-server/compare/v3.3.0-rc.12...v3.3.0-rc.1
+[v3.3.0-rc.12]: https://github.com/openimsdk/open-im-server/compare/v3.3.0...v3.3.0-rc.12
+[v3.3.0]: https://github.com/openimsdk/open-im-server/compare/v3.3.0-rc.0...v3.3.0

CHANGELOG/CHANGELOG.md

@@ -1,7 +1,10 @@
 # Changelog
 
 - [Changelog](#changelog)
+  - [OpenIM versioning policy](#openim-versioning-policy)
   - [command](#command)
+    - [install](#install)
+  - [User](#user)
   - [create next tag](#create-next-tag)
   - [Release version logs](#release-version-logs)
   - [Introduction](#introduction)
@@ -13,20 +16,82 @@
 
 All notable changes to this project will be documented in this file.
 
-+ [https://github.com/OpenIMSDK/Open-IM-Server/releases](https://github.com/OpenIMSDK/Open-IM-Server/releases)
++ [https://github.com/openimsdk/open-im-server/releases](https://github.com/openimsdk/open-im-server/releases)
+
+## OpenIM versioning policy
+
++ [OpenIM Version](../docs/contrib/version.md)
 
 ## command
 
+To use git-chglog you need to configure:
+
+1. CHANGELOG templates
+2. git-chglog configuration
+
+### install 
+
+```bash
+$ go get github.com/git-chglog/git-chglog/cmd/git-chglog
+```
+
+
+## User
+
+```bash
+$ git-chglog --init
+```
+
+**Options**
+
+- What is the URL of your repository?: https://github.com/openimsdk/open-im-server
+- What is your favorite style?: github
+- Choose the format of your favorite commit message: <type>(<scope>): <subject> -- feat(core): Add new feature
+- What is your favorite template style?: standard
+- Do you include Merge Commit in CHANGELOG?: n
+- Do you include Revert Commit in CHANGELOG?: y
+- In which directory do you output configuration files and templates?: .chglog
+
 ```bash
 git-chglog --tag-filter-pattern 'v2.0.*'  -o CHANGELOG-2.0.md
 ```
 
+**Other uses:**
+
+```bash
+$ git-chglog
+
+  If <tag query> is not specified, it corresponds to all tags.
+  This is the simplest example.
+
+$ git-chglog 1.0.0..2.0.0
+
+  The above is a command to generate CHANGELOG including commit of 1.0.0 to 2.0.0.
+
+$ git-chglog 1.0.0
+
+  The above is a command to generate CHANGELOG including commit of only 1.0.0.
+
+$ git-chglog $(git describe --tags $(git rev-list --tags --max-count=1))
+
+  The above is a command to generate CHANGELOG with the commit included in the latest tag.
+
+$ git-chglog --output CHANGELOG.md
+
+  The above is a command to output to CHANGELOG.md instead of standard output.
+
+$ git-chglog --config custom/dir/config.yml
+
+  The above is a command that uses a configuration file placed other than ".chglog/config.yml".
+```
+
+
 ## create next tag
 
 ```bash
-git-chglog --next-tag 2.0.0 -o CHANGELOG.md
-git commit -am "release 2.0.0"
-git tag 2.0.0
+$ git-chglog --next-tag 2.0.0 -o CHANGELOG.md
+$ git commit -am "release 2.0.0"
+$ git tag 2.0.0
 ```
 
 | Query          | Description                                    | Example                     |
@@ -46,6 +111,10 @@ git tag 2.0.0
 + [OpenIM CHANGELOG-V2.3](CHANGELOG-2.3.md)
 + [OpenIM CHANGELOG-V2.9](CHANGELOG-2.9.md)
 + [OpenIM CHANGELOG-V3.0](CHANGELOG-3.0.md)
++ [OpenIM CHANGELOG-V3.1](CHANGELOG-3.1.md)
++ [OpenIM CHANGELOG-V3.2](CHANGELOG-3.2.md)
++ [OpenIM CHANGELOG-V3.3](CHANGELOG-3.3.md)
+
 
 ## Introduction
 
@@ -55,7 +124,7 @@ In both the open-source and closed-source software development communities, it i
 
 The most common format for version numbers is as follows:
 
-```
+```bash
 major.minor[.patch[.build]]
 ```
 

CODE_OF_CONDUCT.md

@@ -0,0 +1,128 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, religion, or sexual identity
+and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our
+community include:
+
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the
+  overall community
+
+Examples of unacceptable behavior include:
+
+* The use of sexualized language or imagery, and sexual attention or
+  advances of any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or email
+  address, without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Enforcement Responsibilities
+
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
+
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official e-mail address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported to the community leaders responsible for enforcement at
+`security@openim.io`.
+All complaints will be reviewed and investigated promptly and fairly.
+
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series
+of actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or
+permanent ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior,  harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within
+the community.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.0, available at
+https://www.contributor-covenant.org/version/2/0/code_of_conduct.html.
+
+Community Impact Guidelines were inspired by [Mozilla's code of conduct
+enforcement ladder](https://github.com/mozilla/diversity).
+
+[homepage]: https://www.contributor-covenant.org
+
+For answers to common questions about this code of conduct, see the FAQ at
+https://www.contributor-covenant.org/faq. Translations are available at
+https://www.contributor-covenant.org/translations.

CONTRIBUTING.md

@@ -4,6 +4,10 @@ So, you want to hack on Open-IM-Server? Yay!
 
 First of all, thank you for considering contributing to our project! We appreciate your time and effort, and we value any contribution, whether it's reporting a bug, suggesting a new feature, or submitting a pull request.
 
+![Hello OpenIM Image](assets/demo/hello-openim.png)
+
+> Use `make demo` start contributing fast.
+
 This document provides guidelines and best practices to help you contribute effectively.
 
 ## 📇Topics
@@ -38,11 +42,17 @@ If you are familiar with [Makefile](./Makefile) , you can easily see the clever
 
 The [Makefile](./Makefile) is for every developer, even if you don't know how to use the Makefile tool, don't worry, we provide two great commands to get you up to speed with the Makefile architecture, `make help` and `make help-all`, it can reduce problems of the developing environment.
 
+In accordance with the naming conventions adopted by OpenIM and drawing reference from the Google Naming Conventions as per the guidelines available at https://google.github.io/styleguide/go/, the following expectations for naming practices within the project are set forth: 
+
++ https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/code-conventions.md
++ https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/go-code.md
+
+
 ## Code of ConductCode of Conduct
 
 #### Code and doc contribution
 
-Every action to make project Open-IM-Server better is encouraged. On GitHub, every improvement for Open-IM-Server could be via a [PR](https://github.com/OpenIMSDK/Open-IM-Server/pulls) (short for pull request).
+Every action to make project Open-IM-Server better is encouraged. On GitHub, every improvement for Open-IM-Server could be via a [PR](https://github.com/openimsdk/open-im-server/pulls) (short for pull request).
 
 + If you find a typo, try to fix it!
 + If you find a bug, try to fix it!
@@ -57,18 +67,18 @@ Every action to make project Open-IM-Server better is encouraged. On GitHub, eve
 
 #### Where should I start?
 
-+ If you are new to the project, don't know how to contribute Open-IM-Server, please check out the [good first issue](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aopen+label%3A"good+first+issue"+sort%3Aupdated-desc) label.
-+ You should be good at filtering the Open-IM-Server issue tags and finding the ones you like, such as [RFC](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) for big initiatives, features for [feature](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+label%3Afeature) proposals, and [bug](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+label%3Abug+) fixes.
-+ If you are looking for something to work on, check out our [open issues](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc).
-+ If you have an idea for a new feature, please [open an issue](https://github.com/OpenIMSDK/Open-IM-Server/issues/new/choose), and we can discuss it.
++ If you are new to the project, don't know how to contribute Open-IM-Server, please check out the [good first issue](https://github.com/openimsdk/open-im-server/issues?q=is%3Aopen+label%3A"good+first+issue"+sort%3Aupdated-desc) label.
++ You should be good at filtering the Open-IM-Server issue tags and finding the ones you like, such as [RFC](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) for big initiatives, features for [feature](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+label%3Afeature) proposals, and [bug](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+label%3Abug+) fixes.
++ If you are looking for something to work on, check out our [open issues](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc).
++ If you have an idea for a new feature, please [open an issue](https://github.com/openimsdk/open-im-server/issues/new/choose), and we can discuss it.
 
 #### Design documents
 
-For any substantial design, there should be a well-crafted design document. This document is not just a simple record, but also a detailed description and manifestation, which can help team members better understand the design thinking and grasp the design direction. In the process of writing the design document, we can choose to use tools such as `Google Docs` or `Notion`, and even mark RFC in [issues](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) or [discussions](https://github.com/OpenIMSDK/Open-IM-Server/discussions) for better collaboration. Of course, after completing the design document, we should also add it to our [Shared Drive](https://drive.google.com/drive/) and notify the appropriate working group to let everyone know of its existence. Only by doing so can we maximize the effectiveness of the design document and provide strong support for the smooth progress of the project.
+For any substantial design, there should be a well-crafted design document. This document is not just a simple record, but also a detailed description and manifestation, which can help team members better understand the design thinking and grasp the design direction. In the process of writing the design document, we can choose to use tools such as `Google Docs` or `Notion`, and even mark RFC in [issues](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) or [discussions](https://github.com/openimsdk/open-im-server/discussions) for better collaboration. Of course, after completing the design document, we should also add it to our [Shared Drive](https://drive.google.com/drive/) and notify the appropriate working group to let everyone know of its existence. Only by doing so can we maximize the effectiveness of the design document and provide strong support for the smooth progress of the project.
 
 Anybody can access the shared Drive for reading. To get access to comment. Once you've done that, head to the [shared Drive](https://drive.google.com/) and behold all the docs.
 
-In addition to that, we'd love to invite you to [join our Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) where you can play with your imagination, tell us what you're working on, and get a quick response.
+In addition to that, we'd love to invite you to [join our Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) where you can play with your imagination, tell us what you're working on, and get a quick response.
 
 When documenting a new design, we recommend a 2-step approach:
 
@@ -77,7 +87,7 @@ When documenting a new design, we recommend a 2-step approach:
 
 In order to contribute a feature to Open-IM-Server you'll need to go through the following steps:
 
-+ Discuss your idea with the appropriate [working groups](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) on the working group's Slack channel.
++ Discuss your idea with the appropriate [working groups](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) on the working group's Slack channel.
 + Once there is general agreement that the feature is useful, create a GitHub issue to track the discussion. The issue should include information about the requirements and use cases that it is trying to address.
 + Include a discussion of the proposed design and technical details of the implementation in the issue.
 
@@ -91,10 +101,10 @@ To propose PR for the Open-IM-Server item, we assume you have registered a GitHu
 
 2. **CLONE** your own repository to main locally. Use `git clone https://github.com/<your-username>/Open-IM-Server.git` to clone repository to your local machine. Then you can create new branches to finish the change you wish to make.
 
-3. **Set Remote** upstream to be `https://github.com/OpenIMSDK/Open-IM-Server.git` using the following two commands:
+3. **Set Remote** upstream to be `https://github.com/openimsdk/open-im-server.git` using the following two commands:
 
    ```bash
-   ❯ git remote add upstream https://github.com/OpenIMSDK/Open-IM-Server.git
+   ❯ git remote add upstream https://github.com/openimsdk/open-im-server.git
    ❯ git remote set-url --push upstream no-pushing
    ```
 
@@ -104,7 +114,7 @@ To propose PR for the Open-IM-Server item, we assume you have registered a GitHu
    ❯ git remote -v
    origin     https://github.com/<your-username>/Open-IM-Server.git (fetch)
    origin     https://github.com/<your-username>/Open-IM-Server.git (push)
-   upstream   https://github.com/OpenIMSDK/Open-IM-Server.git (fetch)
+   upstream   https://github.com/openimsdk/open-im-server.git (fetch)
    upstream   no-pushing (push)
    ```
 
@@ -130,7 +140,7 @@ To propose PR for the Open-IM-Server item, we assume you have registered a GitHu
 
    ```bash
    ❯ git rebase upstream/main
-   ❯ make link	  # golangci-lint run -c .golangci.yml
+   ❯ make lint	  # golangci-lint run -c .golangci.yml
    ❯ git add -A  # add changes to staging
    ❯ git commit -a -s -m "message for your changes" # -s adds a Signed-off-by trailer
    ```
@@ -170,7 +180,7 @@ To propose PR for the Open-IM-Server item, we assume you have registered a GitHu
    # then create pull request, and merge
    ```
 
-7. **Open a pull request** to `OpenIMSDK/Open-IM-Server:main`
+7. **Open a pull request** to `openimsdk/open-im-server:main`
 
    It is recommended to review your changes before filing a pull request. Check if your code doesn't conflict with the main branch and no redundant code is included.
 
@@ -182,11 +192,11 @@ We divide the problem into security and general problems:
 
 Security issues are always treated seriously. As our usual principle, we discourage anyone to spread security issues. If you find a security issue of Open-IM-Server, please do not discuss it in public and even do not open a public issue.
 
-Instead we encourage you to send us a private email to winxu81@gmail.com to report this.
+Instead we encourage you to send us a private email to info@openim.io to report this.
 
 #### Reporting general issues
 
-To be honest, we regard every user of Open-IM-Serveras a very kind contributor. After experiencing Open-IM-Server, you may have some feedback for the project. Then feel free to open an issue via [NEW ISSUE](https://github.com/OpenIMSDK/Open-IM-Server/issues/new/choose).
+To be honest, we regard every user of Open-IM-Serveras a very kind contributor. After experiencing Open-IM-Server, you may have some feedback for the project. Then feel free to open an issue via [NEW ISSUE](https://github.com/openimsdk/open-im-server/issues/new/choose).
 
 Since we collaborate project Open-IM-Server in a distributed way, we appreciate **WELL-WRITTEN**, **DETAILED**, **EXPLICIT** issue reports. To make the communication more efficient, we wish everyone could search if your issue is an existing one in the searching list. If you find it existing, please add your details in comments under the existing issue instead of opening a brand new one.
 
@@ -254,7 +264,7 @@ An example for this could be:
 
 PR is the only way to make change to Open-IM-Server project files. To help reviewers better get your purpose, PR description could not be too detailed. We encourage contributors to follow the [PR template](https://github.com/OpenIMSDK/.github/tree/main/.github/PULL_REQUEST_TEMPLATE.md) to finish the pull request.
 
-You can find some very formal PR in [RFC](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) issues and learn about them.
+You can find some very formal PR in [RFC](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) issues and learn about them.
 
 **📖 Opening PRs:**
 
@@ -266,7 +276,7 @@ You can find some very formal PR in [RFC](https://github.com/OpenIMSDK/Open-IM-S
 **🈴 Reviewing PRs:**
 
 + Be respectful and constructive 
-+ Assign yourself to the PR 
++ Assign yourself to the PR (comment `/assign`)
 + Check if all checks are passing
 + Suggest changes instead of simply commenting on found issues
 + If you are unsure about something, ask the author
@@ -303,8 +313,8 @@ git() {
 
 The documentation for Open-IM-Server includes:
 
-+ [README.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/README.md): This file includes the basic information and instructions for getting started with Open-IM-Server.
-+ [CONTRIBUTING.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/CONTRIBUTING.md): This file contains guidelines for contributing to Open-IM-Server's codebase, such as how to submit issues, pull requests, and code reviews.
++ [README.md](https://github.com/openimsdk/open-im-server/blob/main/README.md): This file includes the basic information and instructions for getting started with Open-IM-Server.
++ [CONTRIBUTING.md](https://github.com/openimsdk/open-im-server/blob/main/CONTRIBUTING.md): This file contains guidelines for contributing to Open-IM-Server's codebase, such as how to submit issues, pull requests, and code reviews.
 + [Official Documentation](https://doc.rentsoft.cn/): This is the official documentation for Open-IM-Server, which includes comprehensive information on all of its features, configuration options, and troubleshooting tips.
 
 Please obey the following rules to better format the docs, which would greatly improve the reading experience.
@@ -320,9 +330,9 @@ Please obey the following rules to better format the docs, which would greatly i
 
 We choose GitHub as the primary place for Open-IM-Server to collaborate. So the latest updates of Open-IM-Server are always here. Although contributions via PR is an explicit way to help, we still call for any other ways.
 
-+ reply to other's [issues](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc) if you could;
++ reply to other's [issues](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc) if you could;
 + help solve other user's problems;
-+ help review other's [PR](https://github.com/OpenIMSDK/Open-IM-Server/pulls?q=is%3Apr+is%3Aopen+sort%3Aupdated-desc) design; 
++ help review other's [PR](https://github.com/openimsdk/open-im-server/pulls?q=is%3Apr+is%3Aopen+sort%3Aupdated-desc) design; 
 + discuss about Open-IM-Server to make things clearer;
 + advocate [Open-IM-Server](https://google.com/search?q=Open-IM-Server) technology beyond GitHub;
 + write blogs on Open-IM-Server and so on.
@@ -360,12 +370,12 @@ Such a commit can get produced as follows:
 
 We value close connections with our users, developers, and contributors here at Open-IM-Server. With a large community and maintainer team, we're always here to help and support you. Whether you're looking to join our community or have any questions or suggestions, we welcome you to get in touch with us.
 
-Our most recommended way to get in touch is through [Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg). Even if you're in China, Slack is usually not blocked by firewalls, making it an easy way to connect with us. Our Slack community is the ideal place to discuss and share ideas and suggestions with other users and developers of Open-IM-Server. You can ask technical questions, seek help, or share your experiences with other users of Open-IM-Server.
+Our most recommended way to get in touch is through [Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q). Even if you're in China, Slack is usually not blocked by firewalls, making it an easy way to connect with us. Our Slack community is the ideal place to discuss and share ideas and suggestions with other users and developers of Open-IM-Server. You can ask technical questions, seek help, or share your experiences with other users of Open-IM-Server.
 
 In addition to Slack, we also offer the following ways to get in touch:
 
-+ <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg" target="_blank"><img src="https://img.shields.io/badge/slack-%40OpenIMSDKCore-informational?logo=slack&style=flat-square"></a>:  We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) team channel.
-+ <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=4closetool3@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a>: Get in touch with us on [Gmail](winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
++ <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q" target="_blank"><img src="https://img.shields.io/badge/slack-%40OpenIMSDKCore-informational?logo=slack&style=flat-square"></a>:  We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) team channel.
++ <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=4closetool3@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a>: Get in touch with us on [Gmail](info@openim.io). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
 + <a href="https://doc.rentsoft.cn/" target="_blank"><img src="https://img.shields.io/badge/%E5%8D%9A%E5%AE%A2-%40OpenIMSDKCore-blue?style=social&logo=Octopus%20Deploy"></a>: Read our [blog](https://doc.rentsoft.cn/). Our blog is a great place to stay up-to-date with Open-IM-Server projects and trends. On the blog, we share our latest developments, tech trends, and other interesting information.
 + <a href="https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg" target="_blank"><img src="https://img.shields.io/badge/%E5%BE%AE%E4%BF%A1-OpenIMSDKCore-brightgreen?logo=wechat&style=flat-square"></a>: Add [Wechat](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg) and indicate that you are a user or developer of Open-IM-Server. We will process your request as soon as possible.
 

Dockerfile

@@ -1,5 +1,5 @@
 # Build Stage
-FROM golang as build
+FROM golang:1.20 AS builder
 
 # Set go mod installation source and proxy
 ARG GO111MODULE=on
@@ -8,25 +8,25 @@ ENV GO111MODULE=$GO111MODULE
 ENV GOPROXY=$GOPROXY
 
 # Set up the working directory
-WORKDIR /Open-IM-Server
+WORKDIR /openim/openim-server
+
+COPY go.mod go.sum ./
+RUN go mod download
 
 # Copy all files to the container
 ADD . .
 
-RUN /bin/sh -c "make build"
+RUN make clean
+RUN make build
 
-# Production Stage
-FROM alpine
+FROM ghcr.io/openim-sigs/openim-ubuntu-image:latest
 
-RUN apk --no-cache add tzdata
-
-# Set directory to map logs, config files, scripts, and SDK
-VOLUME ["/Open-IM-Server/logs", "/Open-IM-Server/config", "/Open-IM-Server/scripts", "/Open-IM-Server/db/sdk"]
+WORKDIR ${SERVER_WORKDIR}
 
 # Copy scripts and binary files to the production image
-COPY --from=build /Open-IM-Server/scripts /Open-IM-Server/scripts
-COPY --from=build /Open-IM-Server/_output/bin/platforms/linux/arm64 /Open-IM-Server/_output/bin/platforms/linux/arm64
+COPY --from=builder ${OPENIM_SERVER_BINDIR} /openim/openim-server/_output/bin
+COPY --from=builder ${OPENIM_SERVER_CMDDIR} /openim/openim-server/scripts
+COPY --from=builder ${SERVER_WORKDIR}/config /openim/openim-server/config
+COPY --from=builder ${SERVER_WORKDIR}/deployments /openim/openim-server/deployments
 
-WORKDIR /Open-IM-Server/scripts
-
-CMD ["./docker_start_all.sh"]
+CMD ["/openim/openim-server/scripts/docker-start-all.sh"]

Makefile

@@ -6,14 +6,14 @@
 
 ## all: Run tidy, gen, add-copyright, format, lint, cover, build ✨
 .PHONY: all
-all: tidy gen add-copyright format lint cover build
+all: tidy gen add-copyright verify test-api lint cover restart
 
 # ==============================================================================
 # Build set
 
-ROOT_PACKAGE=github.com/OpenIMSDK/Open-IM-Server
-# TODO: This is version control for the future
-VERSION_PACKAGE=github.com/OpenIMSDK/Open-IM-Server/pkg/version
+ROOT_PACKAGE=github.com/openimsdk/open-im-server
+# TODO: This is version control for the future https://github.com/openimsdk/open-im-server/issues/574
+VERSION_PACKAGE=github.com/openimsdk/open-im-server/v3/pkg/version
 
 # ==============================================================================
 # Includes
@@ -53,16 +53,75 @@ export USAGE_OPTIONS
 # ==============================================================================
 # Targets
 
+## init: Initialize openim server project ✨
+.PHONY: init
+init:
+	@$(MAKE) gen.init
+
+## init-githooks: Initialize git hooks ✨
+.PHONY: init-githooks
+init-githooks:
+	@$(MAKE) gen.init-githooks
+
+## gen: Generate all necessary files. ✨
+.PHONY: gen
+gen:
+	@$(MAKE) gen.run
+
+## demo: Run demo get started with Makefiles quickly ✨
+.PHONY: demo
+demo:
+	@$(MAKE) go.demo
+
+## version: Check version of openim. ✨
+.PHONY: version
+version:
+	@$(MAKE) go.versionchecker
+
 ## build: Build binaries by default ✨
 .PHONY: build
 build:
 	@$(MAKE) go.build
 
+## start: Start openim ✨
+.PHONY: start
+start:
+	@$(MAKE) go.start
+
+## stop: Stop openim ✨
+.PHONY: stop
+stop:
+	@$(MAKE) go.stop
+
+## restart: Restart openim (make init configuration file is initialized) ✨
+.PHONY: restart
+restart: clean stop build start check
+
 ## multiarch: Build binaries for multiple platforms. See option PLATFORMS. ✨
 .PHONY: multiarch
 multiarch:
 	@$(MAKE) go.build.multiarch
 
+## verify: execute all verity scripts. ✨
+.PHONY: verify
+verify:
+	@$(MAKE) go.verify
+
+## install: Install deployment openim ✨
+.PHONY: install
+install:
+	@$(MAKE) go.install
+
+## check: Check OpenIM deployment ✨
+.PHONY: check
+check:
+	@$(MAKE) go.check
+
+## check-component: Check OpenIM component deployment ✨
+.PHONY: check-component
+check-component:
+	@$(MAKE) go.check-component
+
 ## tidy: tidy go.mod ✨
 .PHONY: tidy
 tidy:
@@ -107,6 +166,15 @@ test:
 cover:
 	@$(MAKE) go.test.cover
 
+## test-api: Run api test. ✨
+.PHONY: test-api
+test-api:
+	@$(MAKE) go.test.api
+
+## test-e2e: Run e2e test
+test-e2e:
+	@$(MAKE) go.test.e2e
+
 ## updates: Check for updates to go.mod dependencies. ✨
 .PHONY: updates
 	@$(MAKE) go.updates
@@ -146,11 +214,6 @@ push.multiarch:
 tools:
 	@$(MAKE) tools.install
 
-## gen: Generate all necessary files. ✨
-.PHONY: gen
-gen:
-	@$(MAKE) gen.run
-
 ## swagger: Generate swagger document. ✨
 .PHONY: swagger
 swagger:
@@ -171,6 +234,11 @@ verify-copyright:
 add-copyright:
 	@$(MAKE) copyright.add
 
+## advertise: Project introduction, become a contributor ✨
+.PHONY: advertise
+advertise:
+	@$(MAKE) copyright.advertise
+
 ## release: release the project ✨
 .PHONY: release
 release: release.verify release.ensure-tag

README-zh_CN.md

@@ -1,193 +1,143 @@
-<h1 align="center" style="border-bottom: none">
-    <b>
-        <a href="https://doc.rentsoft.cn/">Open IM Server</a><br>
-    </b>
-    ⭐️  Open source Instant Messaging Server  ⭐️ <br>
-</h1>
+<p align="center">
+    <a href="https://openim.io">
+        <img src="./assets/logo-gif/openim-logo.gif" width="60%" height="30%"/>
+    </a>
+</p>
+
+<h3 align="center" style="border-bottom: none">
+    ⭐️  Open source Instant Messaging Server ⭐️ <br>
+<h3>
 
 
 <p align=center>
-<a href="https://goreportcard.com/report/github.com/OpenIMSDK/Open-IM-Server"><img src="https://goreportcard.com/badge/github.com/OpenIMSDK/Open-IM-Server" alt="A+"></a>
-<a href="https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22"><img src="https://img.shields.io/github/issues/OpenIMSDK/Open-IM-Server/good%20first%20issue?logo=%22github%22" alt="good first"></a>
-<a href="https://github.com/OpenIMSDK/Open-IM-Server"><img src="https://img.shields.io/github/stars/OpenIMSDK/Open-IM-Server.svg?style=flat&logo=github&colorB=deeppink&label=stars"></a>
-<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg"><img src="https://img.shields.io/badge/Slack-100%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
-<a href="https://github.com/OpenIMSDK/Open-IM-Server/blob/main/LICENSE"><img src="https://img.shields.io/badge/license-Apache--2.0-green"></a>
+<a href="https://goreportcard.com/report/github.com/openimsdk/open-im-server"><img src="https://goreportcard.com/badge/github.com/openimsdk/open-im-server" alt="A+"></a>
+<a href="https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22"><img src="https://img.shields.io/github/issues/openimsdk/open-im-server/good%20first%20issue?logo=%22github%22" alt="good first"></a>
+<a href="https://github.com/openimsdk/open-im-server"><img src="https://img.shields.io/github/stars/openimsdk/open-im-server.svg?style=flat&logo=github&colorB=deeppink&label=stars"></a>
+<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q"><img src="https://img.shields.io/badge/Slack-300%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
+<a href="https://github.com/openimsdk/open-im-server/blob/main/LICENSE"><img src="https://img.shields.io/badge/license-Apache--2.0-green"></a>
 <a href="https://golang.org/"><img src="https://img.shields.io/badge/Language-Go-blue.svg"></a>
 </p>
 
 </p>
 
 <p align="center">
-    <a href="./README.md"><b>English</b></a> •
-    <a href="./README_zh-CN.md"><b>中文</b></a>
+    <a href="./README.md"><b> English </b></a> •
+    <a href="./README-zh_CN.md"><b> 简体中文 </b></a> •
+    <a href="https://openim.io/en"><b> Docs </b></a>
 </p>
 
+
 </p>
 
-## Open-IM-Server 是什么
+## 🟢 扫描微信进群交流
+<img src="./docs/images/Wechat.jpg" width="300">
 
-Open-IM-Server 是一款即时通讯服务器，使用纯 Golang 开发，采用 JSON over WebSocket 传输协议。在 Open-IM-Server 中，所有东西都是消息，因此您可以轻松扩展自定义消息，而无需修改服务器代码。使用微服务架构，Open-IM-Server 可以使用集群进行部署。通过在客户端服务器上部署 Open-IM-Server，开发人员可以免费快速地将即时通讯和实时网络功能集成到自己的应用程序中，并确保业务数据的安全性和隐私性。
 
-## 特点
+## Ⓜ️ 关于 OpenIM
 
-+ 免费
-+ 可扩展架构
-+ 易于集成
-+ 良好的可扩展性
-+ 高性能
-+ 轻量级
-+ 支持多种协议
+OpenIM 不仅仅是一个开源的即时消息组件，它是你的应用程序生态系统的一个不可或缺的部分。查看下面的图表，了解 AppServer、AppClient、OpenIMServer 和 OpenIMSDK 是如何交互的。
 
-## 社区
+![App-OpenIM 关系](./docs/images/oepnim-design.png)
 
-+ 访问中文官方网站：[Open-IM中文开发文档](https://doc.rentsoft.cn/)
+## 🚀 关于 OpenIMSDK
 
-## 快速开始
+**OpenIMSDK** 无缝集成到您的应用中，提供丰富、实时的消息体验，无需复杂的 UI 集成。它提供：
 
-### 安装Open-IM-Server
++ **本地存储**：用于快速数据检索和消息同步。
++ **监听器回调**：确保实时消息交互性。
++ **API 封装**：简化开发流程。
++ **连接管理**：保证可靠的消息传递。
 
-> Open-IM 依赖于五个开源高性能组件：ETCD、MySQL、MongoDB、Redis 和 Kafka。在部署 Open-IM-Server 之前，请确保已安装上述五个组件。如果您的服务器没有上述组件，则必须首先安装缺失组件。如果您已经拥有上述组件，则建议直接使用它们。如果没有，则建议使用 Docker-compose，无需安装依赖项，一键部署，更快更方便。
+它使用 Golang 构建，并支持跨平台部署，确保在所有平台上提供一致的消息体验。
 
-### 使用 Docker 部署
+👉 **[探索 GO SDK](https://github.com/openimsdk/openim-sdk-core)**
 
-1. 安装 [Go 环境](https://golang.org/doc/install)。确保 Go 版本至少为 1.17。
+## 🌐 关于 OpenIMServer
 
-2. 克隆 Open-IM 项目到您的服务器
+精心用 Golang 开发的 **OpenIMServer** 通过多重方式确保了卓越的即时消息服务器能力：
 
-   `git clone <https://github.com/OpenIMSDK/Open-IM-Server.git> --recursive`
++ **模块组成**：它由多个模块组成，例如网关和多个 RPC 服务，提供一个多功能的消息环境。
++ **微服务架构**：支持集群模式，确保出色的性能和可伸缩性，以有效管理各个实例间的通信。
++ **多样的部署选项**：适应你的操作偏好，通过源代码、Kubernetes 或 Docker 提供部署选项。
 
-3. 部署
+### 增强的业务功能：
 
-   1. 修改 env
++ **REST API**：OpenIMServer 为业务系统提供 REST API，旨在通过后端接口为您的操作提供附加功能，如群组创建和消息推送。
++ **回调**：为了扩展其在各种业务形式中的实用性，OpenIMServer 提供了回调能力。即，在事件发生之前或之后，它向业务服务器发送请求，比如发送消息，丰富通信过程中的交互和数据交换流。
 
-      ```
-      #cd Open-IM-server
-      USER=root
-      PASSWORD=openIM123    #密码至少8位数字，不包括特殊字符
-      ENDPOINT=http://127.0.0.1:10005 #请用互联网IP替换127.0.0.1
-      DATA_DIR=./
-      ```
+👉 **[了解更多](https://doc.rentsoft.cn/guides/introduction/product)**
 
-   2. 部署和启动
+## :rocket: 快速开始
 
-      ```
-      chmod +x install_im_server.sh;
-      ./install_im_server.sh;
-      ```
+你只需要一个简单的命令，就可以快速学习 OpenIM 的工程解决方案：
 
-   3. 检查服务
+```
+bashCopy code
+$ make demo
+```
 
-      ```
-      cd scripts;
-      ./docker_check_service.sh
-      ./check_all.sh
-      ```
+🤲 为了方便用户体验，我们提供了多种部署解决方案，您可以根据下面的列表选择自己的部署方法：
 
-      ![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Open-IM-Servers-on-System.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Open-IM-Servers-on-System.png)
++ **[源代码部署指南](https://doc.rentsoft.cn/guides/gettingStarted/imSourceCodeDeployment)**
++ **[Docker 部署指南](https://doc.rentsoft.cn/guides/gettingStarted/dockerCompose)**
++ **[Kubernetes 部署指南](https://github.com/openimsdk/open-im-server/tree/main/deployments)**
 
-### 使用源代码部署
+## :hammer_and_wrench: 开始开发 OpenIM
 
-1. Go 1.17 或更高版本。
+OpenIM 我们的目标是建立一个顶级的开源社区。我们有一套标准，在[社区仓库](https://github.com/OpenIMSDK/community)中。
 
-2. 克隆
+如果你想为这个 Open-IM-Server 仓库做贡献，请阅读我们的[贡献者文档](https://github.com/openimsdk/open-im-server/blob/main/CONTRIBUTING.md)。
 
-   ```
-   git clone <https://github.com/OpenIMSDK/Open-IM-Server.git> --recursive
-   cd cmd/openim-sdk-core
-   git checkout main
-   ```
+在开始之前，请确保你的更改是有需求的。最好的方法是创建一个[新的讨论](https://github.com/openimsdk/open-im-server/discussions/new/choose) 或 [Slack 通信](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q)，或者如果你发现一个问题，首先[报告它](https://github.com/openimsdk/open-im-server/issues/new/choose)。
 
-3. 设置可执行权限
++ [代码标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/go-code.md)
 
-   ```
-   cd ../../scripts/
-   chmod +x *.sh
-   ```
++ [Docker 镜像标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/images.md)
 
-4. 构建
++ [目录标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/directory.md)
 
-   ```
-   ./batch_build_all_service.sh
-   ```
++ [提交标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/commit.md)
 
-所有服务已成功构建
++ [版本控制标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md)
 
-### 配置说明
++ [接口标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/interface.md)
 
-> Open-IM 配置分为基本组件配置和业务内部服务配置。当使用产品时，开发人员需要将每个组件的地址填写为其服务器组件的地址，并确保业务内部服务端口未被占用。
++ [OpenIM配置和环境变量设置](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/environment.md)
 
-### 基本组件配置说明
+> **Note**
+> 针对中国的用户，阅读我们的 [Docker 镜像标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/images.md) 以便使用国内 aliyun 的镜像地址。OpenIM 也有针对中国的 gitee 同步仓库，你可以在 [gitee.com](https://gitee.com/openimsdk) 上找到它。
 
-+ ETCD
-  + Etcd 用于 RPC 服务的发现和注册，Etcd Schema 是注册名称的前缀，建议将其修改为公司名称，Etcd 地址(ip+port)支持集群部署，可以填写多个 ETCD 地址，也可以只有一个 etcd 地址。
-+ MySQL
-  + MySQL 用于消息和用户关系的全存储，暂时不支持集群部署。修改地址、用户、密码和数据库名称。
-+ Mongo
-  + Mongo 用于消息的离线存储，默认存储 7 天。暂时不支持集群部署。只需修改地址和数据库名称即可。
-+ Redis
-  + Redis 目前主要用于消息序列号存储和用户令牌信息存储。暂时不支持集群部署。只需修改相应的 Redis 地址和密码即可。
-+ Kafka
-  + Kafka 用作消息传输存储队列，支持集群部署，只需修改相应的地址。
+## :link: 链接
 
-### 内部服务配置说明
+  + **[完整文档](https://doc.rentsoft.cn/)**
+  + **[更新日志](https://github.com/openimsdk/open-im-server/blob/main/CHANGELOG.md)**
+  + **[FAQ](https://github.com/openimsdk/open-im-server/blob/main/FAQ.md)**
+  + **[代码示例](https://github.com/openimsdk/open-im-server/blob/main/examples)**
 
-+ credential&&push
-  + Open-IM 需要使用三方离线推送功能。目前使用的是腾讯的三方推送，支持 IOS、Android 和 OSX 推送。这些信息是腾讯推送的一些注册信息，开发人员需要去腾讯云移动推送注册相应的信息。如果您没有填写相应的信息，则无法使用离线消息推送功能。
-+ api&&rpcport&&longconnsvr&&rpcregistername
-  + API 端口是 HTTP 接口，longconnsvr 是 WebSocket 监听端口，rpcport 是内部服务启动端口。两者都支持集群部署。请确保这些端口未被使用。如果要为单个服务打开多个服务，请填写多个以逗号分隔的端口。rpcregistername 是每个服务在注册表 Etcd 中注册的服务名称，无需修改。
-+ log&&modulename
-  + 日志配置包括日志文件的存储路径，日志发送到 Elasticsearch 进行日志查看。目前不支持将日志发送到 Elasticsearch。暂时不需要修改配置。modulename 用于根据服务模块的名称拆分日志。默认配置可以。
+## :handshake: 社区
 
-### 脚本说明
+  + **[GitHub Discussions](https://github.com/openimsdk/open-im-server/discussions)**
+  + **[Slack 通信](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q)**
+  + **[GitHub Issues](https://github.com/openimsdk/open-im-server/issues)**
 
-> Open-IM 脚本提供服务编译、启动和停止脚本。有四个 Open-IM 脚本启动模块，一个是 http+rpc 服务启动模块，第二个是 WebSocket 服务启动模块，然后是 msg_transfer 模块，最后是 push 模块。
+  您可以加入这些平台，讨论问题，提出建议，或分享您的成功故事！
 
-+ path_info.sh&&style_info.sh&&
+## :writing_hand: 贡献
 
-  functions.sh
+  我们欢迎任何形式的贡献！请确保在提交 Pull Request 之前阅读我们的[贡献者文档](https://github.com/openimsdk/open-im-server/blob/main/CONTRIBUTING.md)。
 
-  + 包含每个模块的路径信息，包括源代码所在的路径、服务启动名称、shell 打印字体样式以及一些用于处理 shell 字符串的函数。
+  + **[报告 Bug](https://github.com/openimsdk/open-im-server/issues/new?assignees=&labels=bug&template=bug_report.md&title=)**
+  + **[提出新特性](https://github.com/openimsdk/open-im-server/issues/new?assignees=&labels=enhancement&template=feature_request.md&title=)**
+  + **[提交 Pull Request](https://github.com/openimsdk/open-im-server/pulls)**
 
-+ build_all_service.sh
+  感谢您的贡献，我们一起打造一个强大的即时通信解决方案！
 
-  + 编译模块，将 Open-IM 的所有源代码编译为二进制文件并放入 bin 目录。
+## :closed_book: 许可证
 
-+ start_rpc_api_service.sh&&msg_gateway_start.sh&&msg_transfer_start.sh&&push_start.sh
+  OpenIMSDK 在 Apache License 2.0 许可下可用。查看[LICENSE 文件](https://github.com/openimsdk/open-im-server/blob/main/LICENSE)了解更多信息。
 
-  + 独立脚本启动模块，后跟 API 和 RPC 模块、消息网关模块、消息传输模块和推送模块。
+## 🔮 Thanks to our contributors!
 
-+ start_all.sh&&stop_all.sh
-
-  + 总脚本，启动所有服务和关闭所有服务。
-
-## 认证流程图
-
-![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png)
-
-## 架构
-
-![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg)
-
-## 开始开发 OpenIM
-
-[社区存储库](https://github.com/OpenIMSDK/community)包含有关从源代码构建 Kubernetes、如何贡献代码和文档、有关什么的联系人等所有信息。
-
-## 贡献
-
-欢迎对该项目进行贡献！请参见 [CONTRIBUTING.md](http://CONTRIBUTING.md) 了解详细信息。
-
-## 社区会议
-
-我们希望任何人都能参与我们的社区，我们提供礼品和奖励，并欢迎您每周四晚上加入我们。
-
-我们在 [GitHub 讨论](https://github.com/OpenIMSDK/Open-IM-Server/discussions/categories/meeting) 中记录每个 [两周会议](https://github.com/OpenIMSDK/Open-IM-Server/issues/381)，我们的记录写在 [Google 文档](https://docs.google.com/document/d/1nx8MDpuG74NASx081JcCpxPgDITNTpIIos0DS6Vr9GU/edit?usp=sharing) 中。
-
-## 谁在使用 Open-IM-Server
-
-[用户案例研究](https://github.com/OpenIMSDK/community/blob/main/ADOPTERS.md) 页面包括该项目的用户列表。您可以留下 [📝评论](https://github.com/OpenIMSDK/Open-IM-Server/issues/379) 让我们知道您的用例。
-
-![https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg)
-
-## 许可证
-
-Open-IM-Server 使用 Apache 2.0 许可证。有关详情，请参阅 LICENSE 文件。
+<a href="https://github.com/openimsdk/open-im-server/graphs/contributors">
+  <img src="https://contrib.rocks/image?repo=openimsdk/open-im-server" />
+</a>

README.md

@@ -1,189 +1,269 @@
 <p align="center">
-    <a href="https://www.openim.online">
+    <a href="https://openim.io">
         <img src="./assets/logo-gif/openim-logo.gif" width="60%" height="30%"/>
     </a>
 </p>
-<h3 align="center" style="border-bottom: none">
-    ⭐️  Open source Instant Messaging Server ⭐️ <br>
-<h3>
 
+<div align="center">
 
-<p align=center>
-<a href="https://goreportcard.com/report/github.com/OpenIMSDK/Open-IM-Server"><img src="https://goreportcard.com/badge/github.com/OpenIMSDK/Open-IM-Server" alt="A+"></a>
-<a href="https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22"><img src="https://img.shields.io/github/issues/OpenIMSDK/Open-IM-Server/good%20first%20issue?logo=%22github%22" alt="good first"></a>
-<a href="https://github.com/OpenIMSDK/Open-IM-Server"><img src="https://img.shields.io/github/stars/OpenIMSDK/Open-IM-Server.svg?style=flat&logo=github&colorB=deeppink&label=stars"></a>
-<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg"><img src="https://img.shields.io/badge/Slack-100%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
-<a href="https://github.com/OpenIMSDK/Open-IM-Server/blob/main/LICENSE"><img src="https://img.shields.io/badge/license-Apache--2.0-green"></a>
-<a href="https://golang.org/"><img src="https://img.shields.io/badge/Language-Go-blue.svg"></a>
-</p>
+[![Stars](https://img.shields.io/github/stars/openimsdk/open-im-server?style=for-the-badge&logo=github&colorB=ff69b4)](https://github.com/openimsdk/open-im-server/stargazers)
+[![Forks](https://img.shields.io/github/forks/openimsdk/open-im-server?style=for-the-badge&logo=github&colorB=blue)](https://github.com/openimsdk/open-im-server/network/members)
+[![Codecov](https://img.shields.io/codecov/c/github/openimsdk/open-im-server?style=for-the-badge&logo=codecov&colorB=orange)](https://app.codecov.io/gh/openimsdk/open-im-server)
+[![Go Report Card](https://goreportcard.com/badge/github.com/openimsdk/open-im-server?style=for-the-badge)](https://goreportcard.com/report/github.com/openimsdk/open-im-server)
+[![Go Reference](https://img.shields.io/badge/Go%20Reference-blue.svg?style=for-the-badge&logo=go&logoColor=white)](https://pkg.go.dev/github.com/openimsdk/open-im-server/v3)
+[![License](https://img.shields.io/badge/license-Apache--2.0-green?style=for-the-badge)](https://github.com/openimsdk/open-im-server/blob/main/LICENSE)
+[![Slack](https://img.shields.io/badge/Slack-500%2B-blueviolet?style=for-the-badge&logo=slack&logoColor=white)](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q)
+[![Best Practices](https://img.shields.io/badge/Best%20Practices-purple?style=for-the-badge)](https://www.bestpractices.dev/projects/8045)
+[![Good First Issues](https://img.shields.io/github/issues/openimsdk/open-im-server/good%20first%20issue?style=for-the-badge&logo=github)](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22)
+[![Language](https://img.shields.io/badge/Language-Go-blue.svg?style=for-the-badge&logo=go&logoColor=white)](https://golang.org/)
+
+[**English**](./README.md) •
+[**简体中文**](./README-zh_CN.md) •
+[**Docs**](https://openim.io/en)
+
+</div>
 
 </p>
 
-<p align="center">
-    <a href="./README.md"><b> English </b></a> •
-    <a href="./README-zh_CN.md"><b> 中文 </b></a>
-</p>
 
-</p>
+## Ⓜ️ About OpenIM
 
-## What is Open-IM-Server
+OpenIM isn't just an open-source instant messaging component, it's an integral part of your application ecosystem. Check out this diagram to understand how AppServer, AppClient, OpenIMServer, and OpenIMSDK interact.
 
-Instant messaging server. Backend in pure Golang, wire transport protocol is JSON over websocket.
-Everything is a message in Open-IM-Server, so you can extend custom messages easily, there is no need to modify the server code.
-Using microservice architectures, Open-IM-Server can be deployed using clusters.
-By deployment of the Open-IM-Server on the customer's server, developers can integrate instant messaging and real-time network capabilities into their own applications free of charge and quickly, and ensure the security and privacy of business data.
+![App-OpenIM Relationship](./docs/images/oepnim-design.png)
 
-## Features
+## 🚀 About OpenIMSDK
 
-- Everything in Free
-- Scalable architecture
-- Easy integration
-- Good scalability
-- High performance
-- Lightweight
-- Supports multiple protocols
+**OpenIMSDK** seamlessly integrates into your application, delivering a rich, real-time messaging experience without requiring intricate UI integration. It provides:
 
-## Community
-- Visit the Chinese official website here: [📚 Open-IM docs](https://www.openim.online/zh)
++ **Local Storage**: For quick data retrieval and message synchronization.
++ **Listener Callbacks**: Ensuring real-time message interactivity.
++ **API Encapsulation**: Streamlining development processes.
++ **Connection Management**: Guaranteeing reliable message delivery.
 
-## Quick start
+It's crafted in Golang and supports cross-platform deployment, ensuring a coherent messaging experience across all platforms.
 
-### Installing Open-IM-Server
+👉 **[Explore GO SDK](https://github.com/openimsdk/openim-sdk-core)**
 
-> Open-IM relies on five open source high-performance components: ETCD, MySQL, MongoDB, Redis, and Kafka. Privatization deployment Before Open-IM-Server, please make sure that the above five components have been installed. If your server does not have the above components, you must first install Missing components. If you have the above components, it is recommended to use them directly. If not, it is recommended to use Docker-compose, no To install dependencies, one-click deployment, faster and more convenient.
+## 🌐 About OpenIMServer
 
-#### Deploy using Docker
+**OpenIMServer**, meticulously developed in Golang, ensures a stellar instant messaging server capability with a multifold approach:
 
-1. Install [Go environment](https://golang.org/doc/install). Make sure Go version is at least 1.17
++ **Modular Composition**: It's comprised of several modules, such as the gateway and multiple RPC services, offering a versatile messaging environment.
++ **Microservices Architecture**: Supporting cluster modes, it assures outstanding performance and scalability to manage communication effectively across various instances.
++ **Diverse Deployment Options**: Adapts to your operational preferences, offering deployment via source code, Kubernetes, or Docker.
 
-2. Clone the Open-IM project to your server
+### Enhanced Business Functionalities:
 
-   ```
-   git clone https://github.com/OpenIMSDK/Open-IM-Server.git --recursive
-   ```
++ **REST API**: OpenIMServer provides REST API for business systems, aiming to empower your operations with additional functionalities like group creation and message push via backend interfaces.
++ **Callbacks**: To expand its utility across varied business forms, OpenIMServer offers callback capabilities. That is, it sends a request to the business server before or after an event occurs, such as sending a message, enriching the interaction and data exchange flow in the communication processes.
 
-3. Deploy
+👉 **[Learn More](https://docs.openim.io/guides/introduction/product)**
 
-    1. Modify env
+<!--
 
-       ```
-       #cd Open-IM-server
-       USER=root  
-       PASSWORD=openIM123    #Password with more than 8 digits, excluding special characters
-       ENDPOINT=http://127.0.0.1:10005 #Replace 127.0.0.1 with Internet IP
-       DATA_DIR=./ 
-       ```
+## :star2: Why OpenIM
 
-    2. Deploy && Start
-    
-       ```
-       chmod +x install_im_server.sh;
-       ./install_im_server.sh;
-       ```
-    
-    4. Check service
-    
-       ```
-       cd scripts;
-       ./docker_check_service.sh./check_all.sh
-       ```
-       
-       ![OpenIMServersonSystempng](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/Open-IM-Servers-on-System.png)
+**🔍 Function screenshot display**
 
-#### Deploy using source code
+<div align="center">
 
-1. Go 1.17 or above.
-2. Clone
+|            💻🔄📱 Multi Terminal Synchronization 🔄🖥️             |                  📅⚡ Efficient Meetings 🚀💼      |
+| :----------------------------------------------------------: | :---------------------------------------------------------: |
+| ![multiple-message](./assets/demo/multi-terminal-synchronization.png) | ![efficient-meetings](./assets/demo/efficient-meetings.png) |
+|             📲🔄 **One-to-one and Group Chats** 👥🗣️             |        🎁💻 **Special Features - Custom Messages** ✉️🎨|
+|         ![group-chat](./assets/demo/group-chat.png)          |   ![special-function](./assets/demo/special-function.png)      |
 
-```shell
-git clone https://github.com/OpenIMSDK/Open-IM-Server.git --recursive 
-cd cmd/openim-sdk-core
-git checkout main
+</div>
+
+**OpenIM** offers a powerful and reliable instant messaging platform, ensuring versatile communication across multiple platforms with the following key features:
+
+✅ **Versatile Messaging:** Support for text, images, emojis, voice, video, and more, alongside one-on-one and multi-person audio/video calls.
+
+✅ **Robust Chat Capabilities:** Including roles (application administrator, group owner, etc.) and features like muting, group announcements, and dynamic message loading.
+
+✅ **Unique Interaction Features:** Offering read-and-burn private chats and a message editing function to broaden social scenarios.
+
+✅ **Open Source:** The code of OpenIM is open source and aims to build a leading global IM open source community. [GitHub Repository](https://github.com/OpenIMSDK)
+
+✅ **Extensibility:** Implemented in Golang, OpenIM introduces an "everything is a message" communication model, simplifying custom messages and feature extension.
+
+✅ **High Performance:** Supports a hierarchical governance architecture tested and abstracts the storage model of various message types.
+
+✅ **Full Platform Support:** Native support for iOS, Android, Flutter, uni-app, ReactNative, Electron, and Web.
+
+-->
+
+
+## :rocket: Quick Start
+
+We support many platforms. Here are the addresses for quick experience on the web side：
+
+👉 **[OpenIM online web demo](https://web-enterprise.rentsoft.cn/)**
+
+You can quickly learn OpenIM engineering solutions, all it takes is one simple command:
+
+```bash
+$ make demo
 ```
 
-1. Set executable permissions
+🤲 In order to facilitate the user experience, we have provided a variety of deployment solutions, you can choose your own deployment method according to the list below:
 
-```shell
-cd ../../scripts/
-chmod +x *.sh
+<!--
+<details> <summary>Deploying with Docker Compose</summary>
+
+It is recommended to use Docker Compose for deployment, which can easily and quickly deploy the entire OpenIM service on a single node
+
++ [https://github.com/openimsdk/openim-docker](https://github.com/openimsdk/openim-docker)
+
+
+> **Note**
+>
+> If you don't know OpenIM's versioning policy, 📚Read our release policy: https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md
+
+
+</details> 
+
+<details>  <summary>Compile from Source</summary>
+
+
+Ur need `Go 1.20` or higher version, and `make`.
+
+
+```bash
+go version && make --version || echo "Error: One of the commands failed."
 ```
 
-1. build
+Version Details: https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md
 
-```shell
-./batch_build_all_service.sh
+You can get the version number from the command below or from [github releases](https://github.com/openimsdk/open-im-server/tags).
+
+```bash
+$ curl --silent "https://api.github.com/repos/openimsdk/open-im-server/releases" | jq -r '.[].tag_name'
 ```
 
-all services build success
+We have our own version management policy, if you are interested in our version management, I recommend reading [📚 OpenIM Version](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md), We recommend using stable versions such as `v3.3.0` and `v3.2.0` whenever possible. `v3.1.1-alpha.3` as well as `v3.3.0-beta.0` and `v3.2.0-rc.0` are pre-release or beta versions and are not recommended.
 
-### CONFIGURATION INSTRUCTIONS
+Set `OPENIM_VERSION` environment variables for the latest `OPENIM_VERSION` number, or replace the `OPENIM_VERSION` for you to install the OpenIM-Server `OPENIM_VERSION`:
 
-> Open-IM configuration is divided into basic component configuration and business internal service configuration. Developers need to fill in the address of each component as the address of their server component when using the product, and ensure that the internal service port of the business is not occupied
+```bash
+$ OPENIM_VERSION=`curl -s https://api.github.com/repos/openimsdk/open-im-server/releases/latest | grep -oE '"tag_name": "[^"]+"' | head -n1 | cut -d'"' -f4`
+# OPENIM_VERSION=v3.3.0
+```
 
-#### Basic Component Configuration Instructions
+Deploy basic components at the click of a command:
 
-- ETCD
-    - Etcd is used for the discovery and registration of rpc services, etcd Schema is the prefix of the registered name, it is recommended to modify it to your company name, etcd address (ip+port) supports clustered deployment, you can fill in multiple ETCD addresses separated by commas, and also only one etcd address.
-- MySQL
-    - mysql is used for full storage of messages and user relationships. Cluster deployment is not supported for the time being. Modify addresses and users, passwords, and database names.
-- Mongo
-    - Mongo is used for offline storage of messages. The default storage is 7 days. Cluster deployment is temporarily not supported. Just modify the address and database name.
-- Redis
-    - Redis is currently mainly used for message serial number storage and user token information storage. Cluster deployment is temporarily not supported. Just modify the corresponding redis address and password.
-- Kafka
-    - Kafka is used as a message transfer storage queue to support cluster deployment, just modify the corresponding address
+```bash
+# install openim dependency
+$ git clone https://github.com/openimsdk/open-im-server openim/openim-server && export openim=$(pwd)/openim/openim-server && cd $openim/openim-server && git checkout $OPENIM_VERSION
+$ make init && docker compose up -d && make start && make check
+```
 
-#### Internal Service Configuration Instructions
-
-- credential&&push
-    - The Open-IM needs to use the three-party offline push function. Currently, Tencent's three-party push is used. It supports IOS, Android and OSX push. This information is some registration information pushed by Tencent. Developers need to go to Tencent Cloud Mobile Push to register the corresponding information. If you do not fill in the corresponding information, you cannot use the offline message push function
-- api&&rpcport&&longconnsvr&&rpcregistername
-    - The api port is the http interface, longconnsvr is the websocket listening port, and rpcport is the internal service startup port. Both support cluster deployment. Make sure that these ports are not used. If you want to open multiple services for a single service, fill in multiple ports separated by commas. rpcregistername is the service name registered by each service to the registry etcd, no need to modify
-- log&&modulename
-    - The log configuration includes the storage path of the log file, and the log is sent to elasticsearch for log viewing. Currently, the log is not supported to be sent to elasticsearch. The configuration does not need to be modified for the time being. The modulename is used to split the log according to the name of the service module. The default configuration is fine.
-- multiloginpolicy&&tokenpolicy
-    - Open-IM supports multi-terminal login. Currently, there are three multi-terminal login policies. The PC terminal and the mobile terminal are online at the same time by default. When multiple policies are configured to be true, the first policy with true is used by default, and the token policy is the generated token policy. , The developer can customize the expiration time of the token
-
-### scripts DESCRIPTION
-
-> Open-IM scripts provides service compilation, start, and stop scripts. There are four Open-IM scripts start modules, one is the http+rpc service start module, the second is the websocket service start module, then the msg_transfer module, and the last is the push module
-
-- path_info.sh&&style_info.sh&&functions.sh
-    - Contains the path information of each module, including the path where the source code is located, the name of the service startup, the shell print font style, and some functions for processing shell strings
-- build_all_service.sh
-    - Compile the module, compile all the source code of Open-IM into a binary file and put it into the bin directory
-- start_rpc_api_service.sh&&msg_gateway_start.sh&&msg_transfer_start.sh&&push_start.sh
-    - Independent scripts startup module, followed by api and rpc modules, message gateway module, message transfer module, and push module
-- start_all.sh&&stop_all.sh
-    - Total scripts, start all services and close all services
-
-## Authentication Clow Chart 
-
-![avatar](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/open-im-server.png)
-
-## Architecture
-
-![avatar](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/Architecture.jpg)
-
-## To start developing OpenIM
-The [community repository](https://github.com/OpenIMSDK/community) hosts all information about building Kubernetes from source, how to contribute code and documentation, who to contact about what, etc.
+> `make help` to help you see the instructions supported by OpenIM.
 
 
-## Contributing
+You can use the `make help-all` see OpenIM in action.
 
-Contributions to this project are welcome! Please see [CONTRIBUTING.md](./CONTRIBUTING.md) for details.
+</details>
 
-## Community Meetings
-We want anyone to get involved in our community, we offer gifts and rewards, and we welcome you to join us every Thursday night.
+<details>  <summary>Component Configuration Instructions</summary>
 
-We take notes of each [biweekly meeting](https://github.com/OpenIMSDK/Open-IM-Server/issues/381) in [GitHub discussions](https://github.com/OpenIMSDK/Open-IM-Server/discussions/categories/meeting), and our minutes are written in [Google Docs](https://docs.google.com/document/d/1nx8MDpuG74NASx081JcCpxPgDITNTpIIos0DS6Vr9GU/edit?usp=sharing).
+Read: Configuration center document：https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/environment.md
+
+</details>
 
 
-## Who are using Open-IM-Server
-The [user case studies](https://github.com/OpenIMSDK/community/blob/main/ADOPTERS.md) page includes the user list of the project. You can leave a [📝comment](https://github.com/OpenIMSDK/Open-IM-Server/issues/379) to let us know your use case.
+<details>  <summary>Deployed with kubernetes</summary>
 
-![avatar](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg)
++ https://github.com/openimsdk/open-im-server/blob/main/deployments/README.md
 
-## License
+</details> 
+-->
 
-Open-IM-Server is under the Apache 2.0 license. See the [LICENSE](./LICENSE) file for details
++ **[Source Code Deployment Guide](https://docs.openim.io/guides/gettingStarted/imSourceCodeDeployment)**
++ **[Production deployment of Linux systems](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/install-openim-linux-system.md)**
++ **[Docker Deployment Guide](https://docs.openim.io/guides/gettingStarted/dockerCompose)**
++ **[Kubernetes Deployment Guide](https://github.com/openimsdk/open-im-server/tree/main/deployments)**
+
+<!-- 
+## :link: OpenIM and your application
+
+OpenIM isn't just an open-source instant messaging component, it's an integral part of your application ecosystem. Check out this diagram to understand how AppServer, AppClient, OpenIMServer, and OpenIMSDK interact.
+
+![App-OpenIM Relationship](./docs/images/oepnim-design.png)
+
+## :building_construction: Overall Architecture
+
+Delve into the heart of Open-IM-Server's functionality with our architecture diagram.
+
+![Overall Architecture](./docs/images/Architecture.jpg) -->
+
+## :hammer_and_wrench: To start developing OpenIM
+
+[![Open in Dev Container](https://img.shields.io/static/v1?label=Dev%20Container&message=Open&color=blue&logo=visualstudiocode)](https://vscode.dev/github/openimsdk/open-im-server)
+
+OpenIM Our goal is to build a top-level open source community. We have a set of standards, in the [Community repository](https://github.com/OpenIMSDK/community).
+
+If you'd like to contribute to this Open-IM-Server repository, please read our [contributor documentation](https://github.com/openimsdk/open-im-server/blob/main/CONTRIBUTING.md).
+
+Before you start, please make sure your changes are in demand. The best for that is to create a [new discussion](https://github.com/openimsdk/open-im-server/discussions/new/choose) OR [Slack Communication](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q), or if you find an issue, [report it](https://github.com/openimsdk/open-im-server/issues/new/choose) first.
+
+- [OpenIM API Reference](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/api.md)
+- [OpenIM Bash Logging](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/bash-log.md)
+- [OpenIM CI/CD Actions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/cicd-actions.md)
+- [OpenIM Code Conventions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/code-conventions.md)
+- [OpenIM Commit Guidelines](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/commit.md)
+- [OpenIM Development Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/development.md)
+- [OpenIM Directory Structure](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/directory.md)
+- [OpenIM Environment Setup](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/environment.md)
+- [OpenIM Error Code Reference](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/error-code.md)
+- [OpenIM Git Workflow](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/git-workflow.md)
+- [OpenIM Git Cherry Pick Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/gitcherry-pick.md)
+- [OpenIM GitHub Workflow](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/github-workflow.md)
+- [OpenIM Go Code Standards](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/go-code.md)
+- [OpenIM Image Guidelines](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/images.md)
+- [OpenIM Initial Configuration](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/init-config.md)
+- [OpenIM Docker Installation Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/install-docker.md)
+- [OpenIM OpenIM Linux System Installation](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/install-openim-linux-system.md)
+- [OpenIM Linux Development Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/linux-development.md)
+- [OpenIM Local Actions Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/local-actions.md)
+- [OpenIM Logging Conventions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/logging.md)
+- [OpenIM Offline Deployment](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/offline-deployment.md)
+- [OpenIM Protoc Tools](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/protoc-tools.md)
+- [OpenIM Testing Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/test.md)
+- [OpenIM Utility Go](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-go.md)
+- [OpenIM Makefile Utilities](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-makefile.md)
+- [OpenIM Script Utilities](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-scripts.md)
+- [OpenIM Versioning](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/version.md)
+- [Manage backend and monitor deployment](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/prometheus-grafana.md)
+
+## :busts_in_silhouette: Community
+
++ 📚 [OpenIM Community](https://github.com/OpenIMSDK/community)
++ 💕 [OpenIM Interest Group](https://github.com/Openim-sigs)
++ 🚀 [Join our Slack community](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q)
++ :eyes: [Join our wechat (微信群)](https://openim-1253691595.cos.ap-nanjing.myqcloud.com/WechatIMG20.jpeg)
+
+## :calendar: Community Meetings
+
+We want anyone to get involved in our community and contributing code, we offer gifts and rewards, and we welcome you to join us every Thursday night.
+
+Our conference is in the [OpenIM Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) 🎯, then you can search the Open-IM-Server pipeline to join
+
+We take notes of each [biweekly meeting](https://github.com/orgs/OpenIMSDK/discussions/categories/meeting) in [GitHub discussions](https://github.com/openimsdk/open-im-server/discussions/categories/meeting), Our historical meeting notes, as well as replays of the meetings are available at [Google Docs :bookmark_tabs:](https://docs.google.com/document/d/1nx8MDpuG74NASx081JcCpxPgDITNTpIIos0DS6Vr9GU/edit?usp=sharing).
+
+## :eyes: Who are using OpenIM
+
+Check out our [user case studies](https://github.com/OpenIMSDK/community/blob/main/ADOPTERS.md) page for a list of the project users. Don't hesitate to leave a [📝comment](https://github.com/openimsdk/open-im-server/issues/379) and share your use case.
+
+## :page_facing_up: License
+
+OpenIM is licensed under the Apache 2.0 license. See [LICENSE](https://github.com/openimsdk/open-im-server/tree/main/LICENSE) for the full license text.
+
+The OpenIM logo, including its variations and animated versions, displayed in this repository [OpenIM](https://github.com/openimsdk/open-im-server) under the [assets/logo](./assets/logo) and [assets/logo-gif](assets/logo-gif) directories, are protected by copyright laws.
+
+## 🔮 Thanks to our contributors!
+
+<a href="https://github.com/openimsdk/open-im-server/graphs/contributors">
+  <img src="https://contrib.rocks/image?repo=openimsdk/open-im-server" />
+</a>

assets/demo/README.md

@@ -0,0 +1,14 @@
+## :star2: Why OpenIM
+
+**🔍 Function screenshot display**
+
+<div align="center">
+
+
+|             multiple message              |               Efficient meetings                |
+| :---------------------------------------: | :---------------------------------------------: |
+| ![multiple-message](./multiple-message.png) | ![efficient-meetings](./efficient-meetings.png) |
+|      **One-to-one and group chats**       |     **Special features - Custom messages**      |
+|      ![group-chat](./group-chat.png)      |   ![special-function](./special-function.png)    |
+
+</div>

build/README.md

@@ -0,0 +1,65 @@
+# Building OpenIM
+
+Building OpenIM is easy if you take advantage of the containerized build environment. This document will help guide you through understanding this build process.
+
+## Requirements
+
+1. Docker, using one of the following configurations:
+  * **macOS** Install Docker for Mac. See installation instructions [here](https://docs.docker.com/docker-for-mac/).
+     **Note**: You will want to set the Docker VM to have at least 4GB of initial memory or building will likely fail.
+  * **Linux with local Docker**  Install Docker according to the [instructions](https://docs.docker.com/installation/#installation) for your OS.
+  * **Windows with Docker Desktop WSL2 backend**  Install Docker according to the [instructions](https://docs.docker.com/docker-for-windows/wsl-tech-preview/). Be sure to store your sources in the local Linux file system, not the Windows remote mount at `/mnt/c`.
+  
+  **Note**: You will need to check if Docker CLI plugin buildx is properly installed (`docker-buildx` file should be present in `~/.docker/cli-plugins`). You can install buildx according to the [instructions](https://github.com/docker/buildx/blob/master/README.md#installing).
+
+2. **Optional** [Google Cloud SDK](https://developers.google.com/cloud/sdk/)
+
+You must install and configure Google Cloud SDK if you want to upload your release to Google Cloud Storage and may safely omit this otherwise.
+
+## Actions
+
+About [Images packages](https://github.com/orgs/OpenIMSDK/packages?repo_name=Open-IM-Server)
+
+All files in the `build/images` directory are not templated and are instead rendered by Github Actions, which is an automated process.
+
+Trigger condition:
+1. create a new tag with the format `vX.Y.Z` (e.g. `v1.0.0`)
+2. push the tag to the remote repository
+3. wait for the build to finish
+4. download the artifacts from the release page
+
+## Make images
+
+**help info:**
+
+```bash
+$ make image.help
+```
+
+**build images:**
+
+```bash
+$ make image
+```
+
+## Overview
+
+While it is possible to build OpenIM using a local golang installation, we have a build process that runs in a Docker container.  This simplifies initial set up and provides for a very consistent build and test environment.
+
+
+## Basic Flow
+
+The scripts directly under [`build/`](.) are used to build and test.  They will ensure that the `openim-build` Docker image is built (based on [`build/build-image/Dockerfile`](../Dockerfile) and after base image's `OPENIM_BUILD_IMAGE_CROSS_TAG` from Dockerfile is replaced with one of those actual tags of the base image, like `v1.13.9-2`) and then execute the appropriate command in that container.  These scripts will both ensure that the right data is cached from run to run for incremental builds and will copy the results back out of the container. You can specify a different registry/name and version for `openim-cross` by setting `OPENIM_CROSS_IMAGE` and `OPENIM_CROSS_VERSION`, see [`common.sh`](common.sh) for more details.
+
+The `openim-build` container image is built by first creating a "context" directory in `_output/images/build-image`.  It is done there instead of at the root of the OpenIM repo to minimize the amount of data we need to package up when building the image.
+
+There are 3 different containers instances that are run from this image.  The first is a "data" container to store all data that needs to persist across to support incremental builds. Next there is an "rsync" container that is used to transfer data in and out to the data container.  Lastly there is a "build" container that is used for actually doing build actions.  The data container persists across runs while the rsync and build containers are deleted after each use.
+
+`rsync` is used transparently behind the scenes to efficiently move data in and out of the container.  This will use an ephemeral port picked by Docker.  You can modify this by setting the `OPENIM_RSYNC_PORT` env variable.
+
+All Docker names are suffixed with a hash derived from the file path (to allow concurrent usage on things like CI machines) and a version number.  When the version number changes all state is cleared and clean build is started.  This allows the build infrastructure to be changed and signal to CI systems that old artifacts need to be deleted.
+
+## Build artifacts
+The build system output all its products to a top level directory in the source repository named `_output`.
+These include the binary compiled packages (e.g. imctl, openim-api etc.) and archived Docker images.
+If you intend to run a component with a docker image you will need to import it from this directory with

build/goreleaser.yaml

@@ -0,0 +1,498 @@
+# This is an example .goreleaser.yml file with some sensible defaults.
+# Make sure to check the documentation at https://goreleaser.com
+
+before:
+  hooks:
+    # You may remove this if you don't use go modules.
+    - make tidy
+    - make copyright.add
+    # you may remove this if you don't need go generate
+    - go generate ./...
+
+snapshot:
+  name_template: "{{ incpatch .Version }}-next"
+
+# gomod:
+#   proxy: true
+
+report_sizes: true
+
+# metadata:
+#   mod_timestamp: "{{ .CommitTimestamp }}"
+
+builds:
+  - binary: openim-api
+    id: openim-api
+    main: ./cmd/openim-api/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-cmdutils
+    id: openim-cmdutils
+    main: ./cmd/openim-cmdutils/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-crontask
+    id: openim-crontask
+    main: ./cmd/openim-crontask/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-msggateway
+    id: openim-msggateway
+    main: ./cmd/openim-msggateway/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-msgtransfer
+    id: openim-msgtransfer
+    main: ./cmd/openim-msgtransfer/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-push
+    id: openim-push
+    main: ./cmd/openim-push/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-auth
+    id: openim-rpc-auth
+    main: ./cmd/openim-rpc/openim-rpc-auth/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-conversation
+    id: openim-rpc-conversation
+    main: ./cmd/openim-rpc/openim-rpc-conversation/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-friend
+    id: openim-rpc-friend
+    main: ./cmd/openim-rpc/openim-rpc-friend/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-group
+    id: openim-rpc-group
+    main: ./cmd/openim-rpc/openim-rpc-group/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-msg
+    id: openim-rpc-msg
+    main: ./cmd/openim-rpc/openim-rpc-msg/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-third
+    id: openim-rpc-third
+    main: ./cmd/openim-rpc/openim-rpc-third/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-user
+    id: openim-rpc-user
+    main: ./cmd/openim-rpc/openim-rpc-user/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+
+# TODO：Need a script, such as the init - release to help binary to find the right directory
+# ,which can be compiled binary
+archives:
+  - format: tar.gz
+    # this name template makes the OS and Arch compatible with the results of uname.
+    name_template: >-
+      {{ .ProjectName }}_
+      {{- title .Os }}_
+      {{- if eq .Arch "amd64" }}x86_64
+      {{- else if eq .Arch "386" }}i386
+      {{- else }}{{ .Arch }}{{ end }}
+      {{- if .Arm }}v{{ .Arm }}{{ end }}
+
+    # Set this to true if you want all files in the archive to be in a single directory.
+    # If set to true and you extract the archive 'goreleaser_Linux_arm64.tar.gz',
+    # you'll get a folder 'goreleaser_Linux_arm64'.
+    # If set to false, all files are extracted separately.
+    # You can also set it to a custom folder name (templating is supported).
+    wrap_in_directory: true
+
+    # use zip for windows archives
+    files:
+      - CHANGELOG/*
+      - deployment/*
+      - config/*
+      - build/*
+      - scripts/*
+      - Makefile
+      - install.sh
+      - docs/*
+      - src: "*.md"
+        dst: docs
+
+        # Strip parent folders when adding files to the archive.
+        strip_parent: true
+
+        # File info.
+        # Not all fields are supported by all formats available formats.
+        #
+        # Default: copied from the source file
+        info:
+          # Templates: allowed (since v1.14)
+          owner: root
+
+          # Templates: allowed (since v1.14)
+          group: root
+
+          # Must be in time.RFC3339Nano format.
+          #
+          # Templates: allowed (since v1.14)
+          mtime: "{{ .CommitDate }}"
+
+          # File mode.
+          mode: 0644
+
+    format_overrides:
+    - goos: windows
+      format: zip
+
+changelog:
+  sort: asc
+  use: github
+  filters:
+    exclude:
+      - "^test:"
+      - "^chore"
+      - "merge conflict"
+      - Merge pull request
+      - Merge remote-tracking branch
+      - Merge branch
+      - go mod tidy
+  groups:
+    - title: Dependency updates
+      regexp: '^.*?(feat|fix)\(deps\)!?:.+$'
+      order: 300
+    - title: "New Features"
+      regexp: '^.*?feat(\([[:word:]]+\))??!?:.+$'
+      order: 100
+    - title: "Security updates"
+      regexp: '^.*?sec(\([[:word:]]+\))??!?:.+$'
+      order: 150
+    - title: "Bug fixes"
+      regexp: '^.*?fix(\([[:word:]]+\))??!?:.+$'
+      order: 200
+    - title: "Documentation updates"
+      regexp: ^.*?doc(\([[:word:]]+\))??!?:.+$
+      order: 400
+    - title: "Build process updates"
+      regexp: ^.*?build(\([[:word:]]+\))??!?:.+$
+      order: 400
+    - title: Other work
+      order: 9999
+
+# dockers:
+#   - image_templates:
+#       - "openimsdk/open-im-server:{{ .Tag }}-amd64"
+#       - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-amd64"
+#     dockerfile: build/images/openim-api/Dockerfile.release
+#     ids: 
+#       - openim-api
+#     use: buildx
+#     build_flag_templates:
+#       - "--pull"
+#       - "--label=io.artifacthub.package.readme-url=https://raw.githubusercontent.com/openimsdk/open-im-server/main/README.md"
+#       - "--label=io.artifacthub.package.logo-url=hhttps://github.com/openimsdk/open-im-server/blob/main/assets/logo/openim-logo-green.png"
+#       - '--label=io.artifacthub.package.maintainers=[{"name":"Xinwei Xiong","email":"3293172751nss@gmail.com"}]'
+#       - "--label=io.artifacthub.package.license=Apace-2.0"
+#       - "--label=org.opencontainers.image.description=OpenIM Open source top instant messaging system"
+#       - "--label=org.opencontainers.image.created={{.Date}}"
+#       - "--label=org.opencontainers.image.name={{.ProjectName}}"
+#       - "--label=org.opencontainers.image.revision={{.FullCommit}}"
+#       - "--label=org.opencontainers.image.version={{.Version}}"
+#       - "--label=org.opencontainers.image.source={{.GitURL}}"
+#       - "--platform=linux/amd64"
+#     extra_files:
+#       - scripts/entrypoint.sh
+#   - image_templates:
+#       - "goreleaser/goreleaser:{{ .Tag }}-arm64"
+#       - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-arm64"
+#     dockerfile: build/images/openim-api/Dockerfile.release
+#     use: buildx
+#     build_flag_templates:
+#       - "--pull"
+#       - "--label=io.artifacthub.package.readme-url=https://raw.githubusercontent.com/openimsdk/open-im-server/main/README.md"
+#       - "--label=io.artifacthub.package.logo-url=hhttps://github.com/openimsdk/open-im-server/blob/main/assets/logo/openim-logo-green.png"
+#       - '--label=io.artifacthub.package.maintainers=[{"name":"Xinwei Xiong","email":"3293172751nss@gmail.com"}]'
+#       - "--label=io.artifacthub.package.license=Apace-2.0"
+#       - "--label=org.opencontainers.image.description=OpenIM Open source top instant messaging system"
+#       - "--label=org.opencontainers.image.created={{.Date}}"
+#       - "--label=org.opencontainers.image.name={{.ProjectName}}"
+#       - "--label=org.opencontainers.image.revision={{.FullCommit}}"
+#       - "--label=org.opencontainers.image.version={{.Version}}"
+#       - "--label=org.opencontainers.image.source={{.GitURL}}"
+#       - "--platform=linux/arm64"
+#     goarch: arm64
+#     extra_files:
+#       - scripts/entrypoint.sh
+
+# docker_manifests:
+#   - name_template: "goreleaser/goreleaser:{{ .Tag }}"
+#     image_templates:
+#       - "goreleaser/goreleaser:{{ .Tag }}-amd64"
+#       - "goreleaser/goreleaser:{{ .Tag }}-arm64"
+#   - name_template: "ghcr.io/goreleaser/goreleaser:{{ .Tag }}"
+#     image_templates:
+#       - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-amd64"
+#       - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-arm64"
+#   - name_template: "goreleaser/goreleaser:latest"
+#     image_templates:
+#       - "goreleaser/goreleaser:{{ .Tag }}-amd64"
+#       - "goreleaser/goreleaser:{{ .Tag }}-arm64"
+#   - name_template: "ghcr.io/goreleaser/goreleaser:latest"
+#     image_templates:
+#       - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-amd64"
+#       - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-arm64"
+
+nfpms:
+  - id: packages
+    builds:
+      - openim-api
+      - openim-cmdutils
+      - openim-crontask
+      - openim-msggateway
+      - openim-msgtransfer
+      - openim-push
+      - openim-rpc-auth
+      - openim-rpc-conversation
+      - openim-rpc-friend
+      - openim-rpc-group
+      - openim-rpc-msg
+      - openim-rpc-third
+      - openim-rpc-user
+    # Your app's vendor.
+    vendor: OpenIMSDK
+    homepage: https://github.com/openimsdk/open-im-server
+    maintainer: kubbot <https://github.com/kubbot>
+    description: |-
+      Auto sync github labels
+      kubbot && openimbot
+    license: MIT
+    formats:
+      - apk
+      - deb
+      - rpm
+      - termux.deb # Since: v1.11
+      - archlinux # Since: v1.13
+    dependencies:
+      - git
+    recommends:
+      - golang
+
+
+# The lines beneath this are called `modelines`. See `:help modeline`
+# Feel free to remove those if you don't want/use them.
+# yaml-language-server: $schema=https://goreleaser.com/static/schema.json
+# vim: set ts=2 sw=2 tw=0 fo=cnqoj
+
+# Default: './dist'
+dist: ./_output/dist
+
+# .goreleaser.yaml
+milestones:
+  # You can have multiple milestone configs
+  -
+    # Repository for the milestone
+    # Default is extracted from the origin remote URL
+    repo:
+      owner: OpenIMSDK
+      name: Open-IM-Server
+
+    # Whether to close the milestone
+    close: true
+
+    # Fail release on errors, such as missing milestone.
+    fail_on_error: false
+
+    # Name of the milestone
+    #
+    # Default: '{{ .Tag }}'
+    name_template: "Current Release"
+
+# publishers:
+#   - name: "fury.io"
+#     ids:
+#       - packages
+#     dir: "{{ dir .ArtifactPath }}"
+#     cmd: |
+#       bash -c '
+#       if [[ "{{ .Tag }}" =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
+#         curl -F package=@{{ .ArtifactName }} https://{{ .Env.FURY_TOKEN }}@push.fury.io/{{ .Env.USERNAME }}/
+#       else
+#         echo "Skipping deployment: Non-production release detected"
+#       fi'
+
+checksum:
+  name_template: "{{ .ProjectName }}_checksums.txt"
+  algorithm: sha256
+
+release:
+  prerelease: auto

build/images/Dockerfile

@@ -12,16 +12,13 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-#more datasource-compose.yaml 
-apiVersion: 1
+FROM BASE_IMAGE
 
-datasources:
-- name: Prometheus
-  type: prometheus
-  access: proxy
-  orgId: 1
-  url: http://127.0.0.1:9091
-  basicAuth: false
-  isDefault: true
-  version: 1
-  editable: true
+WORKDIR ${SERVER_WORKDIR}
+
+# Set HTTP proxy
+ARG BINARY_NAME
+
+COPY BINARY_NAME ./bin/BINARY_NAME
+
+ENTRYPOINT ["./bin/BINARY_NAME"]

build/images/openim-api/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-api
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-api /usr/bin/openim-api
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-api ./bin/openim-api
+
+ENTRYPOINT ["./bin/openim-api"]

build/images/openim-cmdutils/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-cmdutils
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-cmdutils /usr/bin/openim-cmdutils
+
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-cmdutils ./bin/openim-cmdutils
+
+ENTRYPOINT ["./bin/openim-cmdutils"]
+
+CMD ["--help"]

build/images/openim-crontask/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-crontask
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-crontask /usr/bin/openim-crontask
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-crontask ./bin/openim-crontask
+
+ENTRYPOINT ["./bin/openim-crontask"]

build/images/openim-msggateway/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-msggateway
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-msggateway /usr/bin/openim-msggateway
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-msggateway ./bin/openim-msggateway
+
+ENTRYPOINT ["./bin/openim-msggateway"]

build/images/openim-msgtransfer/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-msgtransfer
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-msgtransfer /usr/bin/openim-msgtransfer
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-msgtransfer ./bin/openim-msgtransfer
+
+ENTRYPOINT ["./bin/openim-msgtransfer"]

build/images/openim-push/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-push
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-push /usr/bin/openim-push
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-push ./bin/openim-push
+
+ENTRYPOINT ["./bin/openim-push"]

build/images/openim-rpc-auth/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-rpc-auth
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-auth /usr/bin/openim-rpc-auth
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-rpc-auth ./bin/openim-rpc-auth
+
+ENTRYPOINT ["./bin/openim-rpc-auth"]

build/images/openim-rpc-conversation/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-rpc-conversation
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-conversation /usr/bin/openim-rpc-conversation
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-rpc-conversation ./bin/openim-rpc-conversation
+
+ENTRYPOINT ["./bin/openim-rpc-conversation"]

build/images/openim-rpc-friend/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-rpc-friend
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-friend /usr/bin/openim-rpc-friend
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-rpc-friend ./bin/openim-rpc-friend
+
+ENTRYPOINT ["./bin/openim-rpc-friend"]

build/images/openim-rpc-group/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-rpc-group
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-group /usr/bin/openim-rpc-group
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-rpc-group ./bin/openim-rpc-group
+
+ENTRYPOINT ["./bin/openim-rpc-group"]

build/images/openim-rpc-msg/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-rpc-msg
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-msg /usr/bin/openim-rpc-msg
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-rpc-msg ./bin/openim-rpc-msg
+
+ENTRYPOINT ["./bin/openim-rpc-msg"]

build/images/openim-rpc-third/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-rpc-third
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-third /usr/bin/openim-rpc-third
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-rpc-third ./bin/openim-rpc-third
+
+ENTRYPOINT ["./bin/openim-rpc-third"]

build/images/openim-rpc-user/Dockerfile

@@ -0,0 +1,45 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make build BINS=openim-rpc-user
+
+RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-user /usr/bin/openim-rpc-user
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /usr/bin/openim-rpc-user ./bin/openim-rpc-user
+
+ENTRYPOINT ["./bin/openim-rpc-user"]

build/images/openim-tools/component/Dockerfile

@@ -0,0 +1,49 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make clean
+RUN make build BINS=component
+
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /openim/openim-server/_output/bin/tools /openim/openim-server/_output/bin/tools/
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
+
+ENV OPENIM_SERVER_CONFIG_NAME=/openim/openim-server/config
+
+RUN mv ${OPENIM_SERVER_BINDIR}/platforms/$(get_os)/$(get_arch)/component /usr/bin/component
+
+ENTRYPOINT ["bash", "-c", "component -c $OPENIM_SERVER_CONFIG_NAME"]

build/images/openim-tools/openim-web/Dockerfile

@@ -0,0 +1,57 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+RUN apt-get update && apt-get install -y curl unzip
+
+RUN curl -LO https://app-1302656840.cos.ap-nanjing.myqcloud.com/dist.zip \
+   && unzip dist.zip -d ./ \
+   && rm dist.zip
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make clean
+RUN make build BINS=openim-web
+
+FROM ghcr.io/openim-sigs/openim-ubuntu-image:latest
+
+WORKDIR /openim/openim-server
+
+COPY --from=builder /openim/openim-server/_output/bin/tools /openim/openim-server/_output/bin/tools/
+COPY --from=builder /openim/openim-server/dist /openim/openim-server/dist
+
+ENV PORT 11001
+ENV DISTPATH /openim/openim-server/dist
+
+EXPOSE 11001
+
+RUN mv ${OPENIM_SERVER_BINDIR}/tools/$(get_os)/$(get_arch)/openim-web /usr/bin/openim-web
+
+ENTRYPOINT ["bash", "-c", "openim-web -port $PORT -distPath $DISTPATH"]

cmd/openim-api/Makefile

@@ -1,34 +0,0 @@
-.PHONY: all build run gotool install clean help
-
-NAME=openim-api
-BIN_DIR=../../bin/
-
-OS:= $(or $(os),linux)
-ARCH:=$(or $(arch),amd64)
-all: gotool build
-
-ifeq ($(OS),windows)
-
-BINARY_NAME=${NAME}.exe
-
-else
-
-BINARY_NAME=${NAME}
-
-endif
-
-build:
-	CGO_ENABLED=0 GOOS=${OS} GOARCH=${ARCH}; go build -ldflags="-w -s" -o ${BINARY_NAME}
-
-run:
-	@go run ./
-
-gotool:
-	go fmt ./
-	go vet ./
-
-install:build
-	mv ${BINARY_NAME} ${BIN_DIR}
-
-clean:
-	@if [ -f ${BINARY_NAME} ] ; then rm ${BINARY_NAME} ; fi

cmd/openim-api/deploy.Dockerfile

@@ -1,32 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-FROM ubuntu
-
-WORKDIR /Open-IM-Server/bin
-
-RUN apt-get update && apt-get install apt-transport-https && apt-get install procps\
-&&apt-get install net-tools
-#Non-interactive operation
-ENV DEBIAN_FRONTEND=noninteractive
-RUN apt-get install -y vim curl tzdata gawk
-#Time zone adjusted to East eighth District
-RUN ln -fs /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && dpkg-reconfigure -f noninteractive tzdata
-RUN apt-get -qq update \
-    && apt-get -qq install -y --no-install-recommends ca-certificates curl
-COPY ./openim-api ./
-
-VOLUME ["/Open-IM-Server/logs","/Open-IM-Server/config"]
-
-CMD ["./openim-api","--port", "10002"]

cmd/openim-api/main.go

@@ -18,22 +18,25 @@ import (
 	"context"
 	"fmt"
 	"net"
-	"os"
-	"runtime"
-	"strconv"
-	"time"
-
 	"net/http"
 	_ "net/http/pprof"
+	"os"
+	"os/signal"
+	"strconv"
+	"syscall"
+	"time"
 
-	"github.com/OpenIMSDK/Open-IM-Server/internal/api"
-	"github.com/OpenIMSDK/Open-IM-Server/pkg/common/cmd"
-	"github.com/OpenIMSDK/Open-IM-Server/pkg/common/config"
-	"github.com/OpenIMSDK/Open-IM-Server/pkg/common/constant"
-	"github.com/OpenIMSDK/Open-IM-Server/pkg/common/db/cache"
-	"github.com/OpenIMSDK/Open-IM-Server/pkg/common/log"
-	"github.com/OpenIMSDK/Open-IM-Server/pkg/discoveryregistry"
-	openKeeper "github.com/OpenIMSDK/Open-IM-Server/pkg/discoveryregistry/zookeeper"
+	"github.com/OpenIMSDK/protocol/constant"
+	"github.com/OpenIMSDK/tools/discoveryregistry"
+	"github.com/OpenIMSDK/tools/log"
+
+	"github.com/openimsdk/open-im-server/v3/internal/api"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/cmd"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/db/cache"
+	kdisc "github.com/openimsdk/open-im-server/v3/pkg/common/discoveryregister"
+	ginProm "github.com/openimsdk/open-im-server/v3/pkg/common/ginprometheus"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/prommetrics"
 )
 
 func main() {
@@ -41,62 +44,85 @@ func main() {
 	apiCmd.AddPortFlag()
 	apiCmd.AddApi(run)
 	if err := apiCmd.Execute(); err != nil {
+		log.ZError(context.Background(), "API command execution failed", err)
 		panic(err.Error())
 	}
 }
 
-func startPprof() {
-	runtime.GOMAXPROCS(1)
-	runtime.SetMutexProfileFraction(1)
-	runtime.SetBlockProfileRate(1)
-	if err := http.ListenAndServe(":6060", nil); err != nil {
-		panic(err)
-	}
-	os.Exit(0)
-}
+func run(port int, proPort int) error {
+	log.ZInfo(context.Background(), "Openim api port:", "port", port, "proPort", proPort)
 
-func run(port int) error {
-	if port == 0 {
-		return fmt.Errorf("port is empty")
+	if port == 0 || proPort == 0 {
+		err := "port or proPort is empty:" + strconv.Itoa(port) + "," + strconv.Itoa(proPort)
+		log.ZError(context.Background(), err, nil)
+		return fmt.Errorf(err)
 	}
+
 	rdb, err := cache.NewRedis()
 	if err != nil {
+		log.ZError(context.Background(), "Failed to initialize Redis", err)
 		return err
 	}
-	fmt.Println("api start init discov client")
+	log.ZInfo(context.Background(), "api start init discov client")
+
 	var client discoveryregistry.SvcDiscoveryRegistry
-	client, err = openKeeper.NewClient(config.Config.Zookeeper.ZkAddr, config.Config.Zookeeper.Schema,
-		openKeeper.WithFreq(time.Hour), openKeeper.WithUserNameAndPassword(
-			config.Config.Zookeeper.Username,
-			config.Config.Zookeeper.Password,
-		), openKeeper.WithRoundRobin(), openKeeper.WithTimeout(10), openKeeper.WithLogger(log.NewZkLogger()))
+
+	// Determine whether zk is passed according to whether it is a clustered deployment
+	client, err = kdisc.NewDiscoveryRegister(config.Config.Envs.Discovery)
 	if err != nil {
+		log.ZError(context.Background(), "Failed to initialize discovery register", err)
 		return err
 	}
-	if err := client.CreateRpcRootNodes(config.GetServiceNames()); err != nil {
+
+	if err = client.CreateRpcRootNodes(config.Config.GetServiceNames()); err != nil {
+		log.ZError(context.Background(), "Failed to create RPC root nodes", err)
 		return err
 	}
-	fmt.Println("api init discov client success")
-	fmt.Println("api register public config to discov")
-	if err := client.RegisterConf2Registry(constant.OpenIMCommonConfigKey, config.EncodeConfig()); err != nil {
+
+	log.ZInfo(context.Background(), "api register public config to discov")
+	if err = client.RegisterConf2Registry(constant.OpenIMCommonConfigKey, config.Config.EncodeConfig()); err != nil {
+		log.ZError(context.Background(), "Failed to register public config to discov", err)
 		return err
 	}
-	fmt.Println("api register public config to discov success")
+
+	log.ZInfo(context.Background(), "api register public config to discov success")
 	router := api.NewGinRouter(client, rdb)
-	fmt.Println("api init router success")
+	if config.Config.Prometheus.Enable {
+		p := ginProm.NewPrometheus("app", prommetrics.GetGinCusMetrics("Api"))
+		p.SetListenAddress(fmt.Sprintf(":%d", proPort))
+		p.Use(router)
+	}
+	log.ZInfo(context.Background(), "api init router success")
+
 	var address string
 	if config.Config.Api.ListenIP != "" {
 		address = net.JoinHostPort(config.Config.Api.ListenIP, strconv.Itoa(port))
 	} else {
 		address = net.JoinHostPort("0.0.0.0", strconv.Itoa(port))
 	}
-	fmt.Println("start api server, address: ", address, ", OpenIM version: ", config.Version)
-	log.ZInfo(context.Background(), "start server success", "address", address, "version", config.Version)
-	go startPprof()
-	err = router.Run(address)
-	if err != nil {
-		log.ZError(context.Background(), "api run failed ", err, "address", address)
+	log.ZInfo(context.Background(), "start api server", "address", address, "OpenIM version", config.Version)
+
+	server := http.Server{Addr: address, Handler: router}
+	go func() {
+		err = server.ListenAndServe()
+		if err != nil && err != http.ErrServerClosed {
+			log.ZError(context.Background(), "api run failed", err, "address", address)
+			os.Exit(1)
+		}
+	}()
+
+	sigs := make(chan os.Signal, 1)
+	signal.Notify(sigs, syscall.SIGINT, syscall.SIGTERM, syscall.SIGQUIT)
+	<-sigs
+
+	ctx, cancel := context.WithTimeout(context.Background(), 15*time.Second)
+	defer cancel()
+
+	// graceful shutdown operation.
+	if err := server.Shutdown(ctx); err != nil {
+		log.ZError(context.Background(), "failed to api-server shutdown", err)
 		return err
 	}
+
 	return nil
 }

cmd/openim-cmdutils/Makefile

@@ -1,34 +0,0 @@
-.PHONY: all build run gotool install clean help
-
-NAME=openim-cmdutils
-BIN_DIR=../../bin/
-
-OS:= $(or $(os),linux)
-ARCH:=$(or $(arch),amd64)
-all: gotool build
-
-ifeq ($(OS),windows)
-
-BINARY_NAME=${NAME}.exe
-
-else
-
-BINARY_NAME=${NAME}
-
-endif
-
-build:
-	CGO_ENABLED=0 GOOS=${OS} GOARCH=${ARCH}; go build -ldflags="-w -s" -o ${BINARY_NAME}
-
-run:
-	@go run ./
-
-gotool:
-	go fmt ./
-	go vet ./
-
-install:build
-	mv ${BINARY_NAME} ${BIN_DIR}
-
-clean:
-	@if [ -f ${BINARY_NAME} ] ; then rm ${BINARY_NAME} ; fi

cmd/openim-cmdutils/main.go

@@ -15,7 +15,7 @@
 package main
 
 import (
-	"github.com/OpenIMSDK/Open-IM-Server/pkg/common/cmd"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/cmd"
 )
 
 func main() {

cmd/openim-crontask/Makefile

@@ -1,34 +0,0 @@
-.PHONY: all build run gotool install clean help
-
-NAME=openim-crontask
-BIN_DIR=../../bin/
-
-OS:= $(or $(os),linux)
-ARCH:=$(or $(arch),amd64)
-all: gotool build
-
-ifeq ($(OS),windows)
-
-BINARY_NAME=${NAME}.exe
-
-else
-
-BINARY_NAME=${NAME}
-
-endif
-
-build:
-	CGO_ENABLED=0 GOOS=${OS} GOARCH=${ARCH}; go build -ldflags="-w -s" -o ${BINARY_NAME}
-
-run:
-	@go run ./
-
-gotool:
-	go fmt ./
-	go vet ./
-
-install:build
-	mv ${BINARY_NAME} ${BIN_DIR}
-
-clean:
-	@if [ -f ${BINARY_NAME} ] ; then rm ${BINARY_NAME} ; fi